ABOUT INSTITUTE

The Bannari Amman Institute of Technology was established in 1996 by the Bannari Amman Group, serves as one of the citadels of higher education in the Southern part of India. BIT aids to impart knowledge, teamwork, innovation, entrepreneurship, courage, sacrifice and duty which are innards of a meaningful life. It is an impressive campus situated in a serene surrounding at the foothills of the Nilgiris Mountains encompassing a sprawling area of 181 acres with a built-up area of more than 30 lakh square feet green campus and presenting an exemplary illustration of corporate contribution to society. The Institute has a team of 552 dedicated members of faculty, 167 with PhD and 225 pursuing PhD programmes. It offers 21 undergraduate programmes and 10 postgraduate programmes and PhD programmes in Engineering, Technology and Management. BIT also has 25 sophisticated research laboratories and 9 centres of excellence for the betterment of students, research scholars and faculty members. The Institution is approved by AICTE, New Delhi. All eligible courses have been ac-credited by National Board of Accreditation (NBA). The institution Accredited by National Assessment and Accreditation Council (NAAC) with A+ Grade & 3.36 CGPA on 4.0 Scale. BIT has achieved 100% placement for the third consecutive year.


BIT @ glance

ABOUT DEPARTMENT

The contributions of Mechanical Engineering are enormous in the growth of technology over the centuries. Department of Mechanical Engineering of Bannari Amman Institute of Technology was started in the year of 1996. The department offers four-year B.E - Mechanical Engineering, Two-year M.E - Engineering Design,M.E - Industrial Safety Engineering and Ph.D. programmes. The department has a team of 72 highly qualified (among them 23 completed Ph.D) dedicated and motivated members of faculty and well equipped laboratory for UG, PG and Research programmes. B.E - Mechanical Engineering programme has been accredited for six years by National Board of Accreditation and UG, PG programmes have been affiliated to Anna University Chennai and approved by AICTE, New Delhi. The field of Mechanical Engineering encompasses many challenging subjects including Production Engineering, Computer Aided Design and Manufacturing, Power Plant Engineering, Refrigeration and Air Conditioning, Mechatronics, Automation and Additive Manufacturing etc. which have been among the fast growing and the most demanding technologies which enable the development of the society. The Department shines excellent in teaching and research in Manufacturing, Design, Thermal and Automation fields.....






ICAMR 2.0 - Call for Papers

     International Conference on Advances in Materials Research - 2021 (ICAMR 2.0) organized by Bannari Amman Institute of Technology will be add a milestone in the summation of R&D activities held across the world. The advances in materials research reports the latest researches performed in basic materials and their science in the field of composites, metals and alloys, fracture of materials, biomaterials, energy materials and polymers etc. The researches in material science relate the desired properties and their performance enhancement/deterioration with respect to the atomic structure of the materials. The atomic interactions resulting from the density change, covalent and polar bonds are characterized using latest characterization technologies. The original research includes both experimental and theoretical analysis and peer reviewed papers are systematically reported in this proceeding. ICAMR is one of the interdisciplinary forums for researchers working in the areas of basic and applied materials research. The main objective of ICAMR 2021 is to encourage the wide range of applications towards the development of human society with the invention of new materials in the trusted area like development of light weight composite materials in energy applications, construction, instrumentation, environment, communications, safety and ecology and thus contribute to societal well-being and prosperity. It will create a competent prospect for discussion of major issues related to advanced research in materials for their economic exploitation, long term conservation, new development and imaginative uses. It also envisages global networking to inspire innovative research to provide solutions and drive systemic change. Further, eminent scientists across the globe will share their research and future scope for betterment of mankind. The ICAMR 2021 brings leading researches from academia, R&D organization and industries from various region of the world under one roof. This also helps to identify the current demand and emerging area of the basic and applied materials research.

TOPICS

Topics of Interest include (but not limited to...)

●Nanomaterials & Nano particulates
● Advanced Ceramics
● High Performance Composites
● Materials for Electronics and Photonics
● Smart Biomaterials
● Non linear Materials
● Nano-fibrous materials
● Optical Materials
● Diffraction Studies
● Self-healing Materials
● Fracture of Materials
● Magnetic Materials
● Materials Synthesis & Processing

● Materials Theory, Computation, and Design
● Metals and Alloys
● Metallic Glasses
● Organic & Inorganic Elements
● Thermoplastic & Thermosetting Polymers
● Thermal Interface & Insulation Materials
● Materials for Energy Harvesting and Storage
● Energy Exchange smart Materials
● Solar Photovoltaic Cells
● Fuel-cell Materials

PUBLICATIONS

All the accepted papers will be published in Conference Proceedings. Selected papers meeting the scope, relevance, and novelty will be invited by the Organizing Committee to submit ‘Online’ for the following ‘Special Issues’:

SAGE - Journal of Reinforced Plastics and Composites (Scopus and Web of science Indexed with the SCI Impact Factor of 3.710):

Selected papers from ICAMR 2.0 will be published after the follow-up of Publication protocol of SAGE publisher. The mandatory criterion for the selected papers submitted for special issue publication is that they must be peer-reviewed by independent referees in the same way as papers submitted for regular issues of the journal. There is NO publication charge for submitting and publication in the special issue.


Springer – Lecture Notes in Mechanical Engineering (Indexed by SCOPUS. All books published in the series are submitted for consideration in Web of Science.):

Selected papers from ICAMR 2.0 will be published by Springer as a proceedings book volume. Springer will conduct quality checks on the accepted papers and only papers that pass these checks will be published. Springer Nature does not charge any money for publication of Non-Open Access content. Abstracts/extended abstracts and short papers (less than 4 pages) are not considered for publication.


Scientific.net - Key Engineering Materials & Material Science Forum (Scopus Indexed):

Selected papers from ICAMR 2.0 will be published in any one of the above journals from TransTech Publications with additional charges.

s.No Details Date
01 Submission of Full Paper 20.11.2021
02 Intimation of Acceptance 24.11.2021
03 Registration and Camera Ready Paper Submission 30.11.2021


COMMITTEE



International Technical Advisory Board

Dr. Ahmet Selim DALKILIC, Yildiz Technical University, Turkey.
Dr. Hafiz Muhammad Ali, King Fahd University, Dhahran, Saudi Arabia
Dr. Lau Wai Man, Nanyang Technological University, Singapore.
Dr. Saidur Rahman, Sunway University, Bandar Sunway, Malaysia.
Dr. Rajesh Kanna, Al Ghurair University, Dubai.
Dr. Pawel Oclon, Cracow University of Technology, Poland.
Dr. A K Pandey, Sunway University, Malaysia.
Dr. Ravindra Kempaiah, University of Illinois, USA
Dr. Umashankar Subramaniam, Prince Sultan University, Saudi Arabia
Dr. Vijay G Subramanian, University of Michigan, USA
Dr. Ian Gibson, University of Twente, Netherlands
Dr. Mohamed Thariq Bin Haji Hameed S, Univerisiti of Putra, Malaysia
Dr. Mohamed S. Hamdy,King Khalid University,Saudi Arabia
Dr. R. ATCHUDAN,Kyungpook National University
Dr. Sekar Karthikeyan,KYUSHU University, Fukuoka, Japan
Dr. WenTong Chong,University of M'sia, Malaysia.
Dr. Babu Cadiam Mohan,National University of Singapore

National Technical Advisory Board

Dr. K P Karunakaran, IIT, Bombay
Dr. K Ravikumar, IIT, Delhi
Dr. A Mani, IIT, Madras
Dr. Raghu V Prakash, IIT, Madras
Dr. S Venkatachalapathy, NIT, Trichy
Dr. T Ram Prabhu, DRDO, Banglore
Dr. N Sivashanmugam, NIT, Trichy
Dr. A Karpagaraj, NIT, Patna
Dr. N M Sivaram, NIT, Puduchery
Dr. R Kamatchi, VIT, Vellore
Dr. P V Nidheeshh,CSIR-NEERI, Nagpur
Dr. A Arokia Rajan,IIT Madras
Dr. T Jagadesh, Amirtha, Kerala
Dr. Y Ravikumar, NIT, Telangana
Dr. Pulak M Pandey, IIT, Delhi

Advisory committee

Dr. C Palanisamy, Principal
Dr. K Sivakumar, Dean - PDS
Dr. S Jegadheeswaran, Head - R&D
Dr. K L Senthil Kumar, Head - Academics

Convenor

Dr. C Sasi Kumar, Head / Mechanical

Organizing secretary

Dr. G Kumaresan
Prof. N Bhuvanesh
Prof. C Subramaniyan

For Industrialist


  • National INR 6000
  • International $ 100

For Academicians


  • National INR 6000
  • International $ 100

For Full Time Research Scholars and Students (UG & PG)

  • National INR 5000
  • International $ 70

For Proceeding in Conference only

  • National INR 1000
  • International $ 15

PAYMENT DETAILS

DD to be drawn in favor of “THE PRINCIPAL, BANNARI AMMAN INSTITUTE OF TECHNOLOGY” payable at Sathyamangalam / Can be paid through Internet Banking
A/C Name : BIT - Center for Advance Studies
A/C No. : 911010036862582
Account Type : Savings Account
Branch : Axis Bank, Sathyamangalam
IFSC Code : UTIB0000368

speaker 01

Dr. Ahamad Salim Dalkilic

Professor
Yiddish Technical University
Seoul,
Istanbul, Turkey.

speaker 02

Dr. Hafiz Muhammad Ali

Associate Editor,
JTAC Springer &
Editor International Journal of Thermo fluids Elsevier,
Associate Professor,
Mechanical Engineering Department,
King Fahd University of Petroleum and Minerals, Dhahran, Saudi Arabia

speaker 03

Dr. N. L. Parthasarathi

Scientist-E,
Indira Gandhi Centre for Atomic Research,
Kalpakkam,
Tamil Nadu,
India.

speaker 04

Dr P V Nidheesh

Senior Scientist,
CSIR-NEERI,
Nagpur

speaker 05

Dr. N. Sivashanmugam

Associate Professor,
Department of Mechanical Engineering,
NIT Tirchy – 620015,
Tamil Nadu, India

speaker 06

Dr. Arokia Rajan A

Professor/ Applied Mechanics,
IIT Madras,
Chennai 600036, INDIA