Dr Uvaraja V C - Bannari Amman Institute of Technology

Experience Type	Organization	From	To	Total Experience
Engineering	Bannari Amman Institute of Technology, Sathyamangalam	20.06.2005
Engineering	Tamilnadu College of Engineering Coimbatore	02.01.2004	05.05.2005	1 Year & 4 Month(s)
Engineering	Park College of Engineering and Technology	02.01.2001	30.06.2002	1 Year & 5 Month(s)
Industry	Bannari Amman Sugars Ltd	05.05.2000	31.12.2000	0 Year(s) & 7 Month(s)

Degree	Specialization	Institute	University	Year of Passing
B.E	Mechanical Engineering	Bannari Amman Institute of Technology	Bharathiar University, Coimbatore	2000
M.E	Engineering Design	Maharaja Engineering College	Anna University, Chennai	2004
Ph.D	Composite Materials	Bannari Amman Institute of Technology	Anna University, Chennai	2013

S No.	Subject Area
1	Composites
2	Optimization
3	Tribological Characterization

G Mahendran, S Manoj Kumar, Uvaraja V C, Hanish Anand, “Effect of Wheat Husk Biogenic Ceramic Si3N4 Addition on Mechanical, Wear and Flammability Behaviour of Castor Sheath Fibre-Reinforced Epoxy Composite”, J Aust Ceram Soc (2025). https://doi.org/10.1007/s41779-025-01153-8

Uvaraja V C, Raj K, Keservani, Neelesh Kumar Maurya, Balaji Pendakur, Shakeel Ahmed Adhoni, “Formulation and Development of Gel With Essential Oils and Effect of Polymer on Their Antimicrobial Activity”, Vol. 24, No. 2, Pages. 2269-2273, 2024, ISSN 0972-5075eISSN 0976-1772, DOI: https://doi.org/10.51470/bca.2024.24.2.2269

Uvaraja V C, G Ramesh, Gokilakrishnan Gopal, Santhosh Kumar S, “Mechanical, Wear and Flammability of Chitin‑Rich Endoskeleton of Sepioteuthis Sepioidea Powder‑Dispersed Pineapple Fiber‑Reinforced Polyester Composite”, Vol.No.14, Issue No.4, 45323, Doi: 10.1007/S13399-024-05345-3.

Arun Kumar Rajamanickam, Uvaraja V C, “Assessment of Mechanical Properties of LM13 Aluminum Alloy Hybrid Metal Matrix Composites”, Materials Research Express, Volume 9, Number 7, 10.1088/2053-1591/Ac7cc1.

Uvaraja V C, Ramesh G, G Gokilakrishnan, “Mechanical, Wear and Flammability of Chitin‑Rich Endoskeleton of Sepioteuthis Sepioidea Powder‑Dispersed Pineapple Fiber‑Reinforced Polyester Composite”, Biomass Conversion and Biorefinery, Vol. No.14, Issue No.4, 2024.

Uvaraja V C, N Dhanenderan, J Bensam Raj, P Malarkodi, “Physical, Chemical and Thermal Analysis of Banana Flower Pistil Fiber for The Potential Application of Composite Manufacturing”, Proceedings of the Institution of Mechanical Engineers Part E-Journal of Process Mechanical Engineering, Vol. No.236, Issue No.6, 2023.

Arivu Y, Uvaraja V C, Thiyaneshwaran N, Ram Prabhu T, “Synthesis, Processing and Phase Analysis of Quasi Crystal Particle Reinforced Aluminium Matrix Composite”, Materials and Manufacturing Processes, Vol. No.38, Issue No.9, Pages1081-1092, 2023.

Uvaraja V C, Sureshkumar K, Radha Krishnan B, Saravanan G, Ramakrishnan H, “Characterization of Untreated and Alkali Treated Areca Catechu Fibre Through Eco-Friendly Composite Plates”, Volume 52, Part 3, Pages 1108-1112, Https://Doi.Org/10.1016/J.Matpr.2021.11.004, 2022.

P Mohan Kumar, Uvaraja V C, P Madhu, “Effect of AL2o3/PSZ and AL2o3/YSZ Ceramic Coating in CI Engine Fueled with Ternary Blends of Castor Seed Oil and Jatropha Oil Biodiesel Dosed with Diesel”, Korea Citation Index, Vol.23, No.5, Pages 647-655 (9 Pages), Doi : 10.36410/Jcpr.2022.23.5.647, 2022.

Kumar P M, Uvaraja V C, Madhu P, “Effect of AL2o3/PSZ and AL2o3/YSZ Ceramic Coating in CI Engine Fueled with Ternary Blends of Castor Seed Oil and Jatropha Oil Biodiesel Dosed with Diesel”, Journal of Ceramic Processing Research, Vol. No.23, Issue No.5, Pages 647-655, 2022.

Ramesh G, Uvaraja V C, Gnanasundara Jayaraja B, Patil P P, “Fatigue, Fracture Toughness and DMA of Biosilica Toughened Epoxy with Stacked Okra Fiber and AL 2024-T3 Fiber Metal Laminate Composite”, Polymer Composites, Vol. No.43, Issue No.9, Pages 6300-6309, 2022.

Thiyagu T T, Gokilakrishnan G, Uvaraja V C, Maridurai T, Prakash V R A, “Effect of SIO2/TIO2 and ZNO Nanoparticle on Cardanol Oil Compatibilized Pla/Pbat Biocomposite Packaging Film”, Silicon, Vol. No.14, Issue No.7, Pages 3795-3808, 2022.

Ramesh G, Uvaraja V C, Jayaraja B G, Patil P P, “Development of Epoxy-Based Fiber Metal Laminate using Nanosilica and Abelmoschus Esculentus Fiber for Steam Turbine Applications”, Biomass Conversion and Biorefinery, 2022.

Uvaraja V C, Sureshkumar K, Radha Krishnan B, Saravanan G, Ramakrishnan H, “Characterization of Untreated and Alkali Treated Areca Catechu Fibre Through Eco-Friendly Composite Plates”, Materials Today: Proceedings, Vol. No.52, Pages 1108-1112, 2022.

Rajamanickam A K, Uvaraja V C, Selvamuthukumaran D, Surya K, “Fabrication of Paddy Transplanter Machine”, IOP Conference Series: Materials Science and Engineering, Vol. No.1059, Issue No.1, 2021.

Kumar Rajamanickam A, Uvaraja V C, Selvamuthukumaran D, Shanmugasundaram A, “Experimental Investigation on Production of Jatropha Methyl Ester”, IOP Conference Series: Materials Science and Engineering, Vol. No.764, Issue No.1, 2020.

Shanmugasundaram A, Uvaraja V C, Ramesh G, “Performance Characterisation of Silane-Treated MWCNT/Copper Wire-Mesh Reinforced Epoxy Two-Phase Thermal Interface Composite Material”, Digest Journal of Nanomaterials and Biostructures, Vol. No.14, Issue No.2, Pages 407-417, 2019.

Sureshkumar P, Uvaraja V C, Rajakarunakaran S, “Addition of Metallic Reinforcement Enhanced Deformation and Properties of Ceramic Reinforced Composite By Adapting Ecap with Increment Number of Passes”, Materials Research Express, Vol. No.6, Issue No.8, 2019.

Arivu Y, Uvaraja V C, “Optimization on Wear Process Parameters using Response Surface Technique”, International Journal of Mechanical and Production Engineering Research and Development, Vol. No.9, Pages 328-334, 2019.

Sureshkumar P, Uvaraja V C, “Effect of Ceramic and Metallic Reinforcement on Mechanical, Corrosion, and Tribological Behavior of Aluminum Composite By Adopting Design of Experiment Through Taguchi Technique”, Journal of Tribology, Vol. No.140, Issue No.5, 2018.

Uvaraja V C, Natarajan N, Sivakumar K, Jegadheeshwaran S, Sudhakar S, “Tribological Behavior of Heat Treated AL 7075 Aluminium Metal Matrix Composites”, Indian Journal of Engineering and Materials Sciences, Vol. No.22, Issue No.1, Pages.51-61, 2015.

Anandha Moorthy A, Uvaraja V C, Natarajan N, Palani P K, Dhanendran N, Anantha Kumar M, Satheesh KS, “Tribological Behavior of Aluminium Based MMC Subjected to Various Temperature”, International Journal of Applied Engineering Research, Vol. No.9, Issue No.22, Pages 14207-14215, 2014.

Uvaraja V C, “Heat Treatment Parameters to Optimize Friction and Wear Behavior of Novel Hybrid Aluminium Composites using Taguchi Technique”, International Journal of Engineering and Technology, Vol. No.6, Issue No.2, Pages .939-947, 2014.

Uvaraja V C, Natarajan N, Rajendran I, Sivakumar K, “Tribological Behavior of Novel Hybrid Composite Materials using Taguchi Technique”, Journal of Tribology, Vol. No.135, Issue No.2, 2013.

Uvaraja V C, Natarajan N, “Processing of Stir Cast AL – 7075 Hybrid Metal Matrix Composites and their Characterization”, International Review of Mechanical Engineering, Vol. No.6, Issue No.4, Pages 724-729, 2012.

Uvaraja V C, Natarajan N, “Tribological Characterization of Stir-Cast Hybrid Composite Aluminium 6061 Reinforced with SIC and B4C Particulates”, European Journal of Scientific Research, Vol. No.76, Issue No.4, Pages 539-552, 2012.

Uvaraja V C, Deepankumar S, Anandha Moorthy A, “Study The Effect of Port Fuel Injection of Biofuel in A Di Diesel Engine”, International Conference On “Energy and Materials Technologies (Online) (ICEMT- 2021)”, Sri Sivasubramaniya Nadar College of Engineering (SSN), 2021.

Uvaraja V C, “Effect of heat treatment on Mechanical Properties of Aluminum 7075 Metal Matrix on composites”, Proceedings of the international conference on Advanced Materials Science and Technology (ICAMST -2017), BIT, Sathy, August 2017

Uvaraja V C, “Improvement of mechanical properties on aluminium 6063 alloy processed by equal channel angular processing”, International conference on Energy, Environment and Advanced Materials for a Sustainable Future – ICEEAMSF 2017, Dept. of Physics, Kongu Engineering College, Perundurai, May 2017

Vasudevan, M., Karthick, K., Suneeth Kumar, S.M., Uvaraja, V.C., Vijayakumar, L., and Natarajan,A.M. , “Selection of operational conditions for excess sludge handling for an overloaded STP in a college campus”, International Conference on Integrated Solid Waste Management Practices in Developing Countries , CSIR-National Environmental Engineering Research Institute (CSIR-NEERI), Nagpur, April 2017

Uvaraja V C, “Severe Plastic Deformation of Aluminium 6061 Using Equal Channel Angular Pressing”, National Conference on Optimization Techniques in Engineering Sciences and Technologies (OPTEST 2017) , BIT, Sathy, April 2017

Uvaraja V C, “Recent Developments in Point Absorber Type Ocean Wave Energy Conversion”, Optimization techniques in engineering sciences and technologies – OPTEST 2017, BIT, Sathy, March 2017

Uvaraja V C, “Design and Analysis of Different Orientations of Heat Pipe Integrated Heat Sink Design”, Optimization techniques in engineering sciences and technologies – OPTEST 2017, BIT, Sathy, March 2017

Uvaraja V C, “Investigation of Mechanical Properties of Aluminium Metal Matrix Composites – A Review”, Optimization techniques in engineering sciences and technologies – OPTEST 2017, BIT, Sathy, March 2017

Uvaraja V C, “Analysis of tribological behaviour of Metal matrix composites An Experimental Investigation, “, Proceedings of International Conference on recent trends in Engineering,Science and Technology (ICRTEST 2017), Sri Ramanathan Engg College, Tirupur, March 2017

Uvaraja V C, “Investigational Exploration of Mechanical Behaviour of Aluminium based composites.”, Proceedings of International Conference on recent trends in Engineering,Science and Technology (ICRTEST), Sri Ramanathan Engg College, Tirupur, March 2017

S.Bhuvanesh, N.Ajai Praveen, C.Kavitha, V.C.Uvaraja, “GREEN TECHNOLOGY Embedding Technology and Environment for brighter future”, International Seminar on Biology for Sustainable Environment, Bharathidasan University, Tiruchirappalli, March 2017

V.C.Uvaraja, C Kavitha, “Domestic sewege water treatment using natural flocculent”, International Conference on Environment and health in changing climate, Bharathidasan University, Tiruchirappalli, September 2016

Uvaraja V C, “Domestic Sewage Water Treatment Using Natural Floculant”, Int. Conf. on Environment and Health in Changing Climate, Dept. of Environmental Biotechnology, School of Environmental Sciences, Bharathidasan University, Trichy, September 2016

Uvaraja V C, “Analysis of tribological behaviour of Metal Matrix Composites- An Experimental Investigation “, Proceedings of the international conference on Innovative research and Solutions (ICIRS -2016), Fortune Kences Hotel, Tirpathi, Andhra Pradesh, April 2016

Uvaraja V C, “An Experimental Investigation of Mechanical Behaviour of Aluminium based on Composites “, Proceedings of the international conference on Innovative research and Solutions (ICIRS -2016), Fortune Kences Hotel, Tirpathi, Andhra Pradesh, April 2016

Uvaraja V C, “Comparative Study on Mechanical Properties of GMA Welded IRSM41 Mild Steel Based on Grain Flow Direction”, International Conference on Futuristic Innovations in Mechanical Engineering and Manufacturing Management (ICFIMEMM-2016), M.Kumarasamy Engineering college, Karur, March 2016

Uvaraja V C, “A review on tribological behaviour and Machining of aluminium based metal matrix composites”, Proceedings of National Conference on Emerging Research and Advances in Mechanical Sciences (ERAMS -2016), Velammal Engg College, Chennai, March 2016

Uvaraja V C, “Influence of Process Procedure and Temperature Distribution on Local Post Weld Heat Treatment of Thick Wall Carbon Steel Pipe”, Proceedings of International Conference on Modern, Intelligent and Green Manufacturing, Erode Sengunthar Engg College, Tudupathi, December 2015

Uvaraja V C, “Experimental study on the effect of tool pin profile on aluminium aa6063 friction stir welded butt joint”, International conference on advances in materials, manufacturing and applications (AMMA-2015), NIT, Trichy, November 2015

Uvaraja V C, “Influences of Tool Pin Profile on the Mechanical Properties of Friction Stir Welding of Aluminum Alloy”, Proceedings of ICAME-2015, Anna University, Villupuram Campus, October 2015

Uvaraja V C, “Influences of Tool Pin Profile on the Mechanical Properties of Friction Stir Welding of Aluminum Alloy”, Proceedings of ICAME-2015, Anna University, Villupuram Campus , October 2015

Uvaraja V C, “Severe Plastic Deformation of Aluminium 6061 Using Equal Channel Angular Pressing”, International Conference on Advances in Computing, Control, Communication, Automation and Structural Engineering (ACCCAS 2015), Al-Ameen Engineering College, Erode, April 2015

Uvaraja V C, “Optimizing the parameters for friction stir welding of dissimilar aluminium alloys AA5383/AA7075 alloys”, Tenth National Conference on Optimization Techniques in Engineering Sciences and Technologies (OPTEST 2015), BIT, Sathy, April 2015

Uvaraja V C, “Severe Plastic Deformation of Aluminium 6061 Using Equal Channel Angular Pressing”, Tenth National Conference on Optimization Techniques in Engineering Sciences and Technologies (OPTEST 2015), BIT, sathy, April 2015

Uvaraja V C, “Mechanical and Micro Structural Behavior of Magnesium during Severe Plastic Deformation Process “, International Conference on Engineering Technology and Science (ICETS15), Muthayammal College of Engineering, Rasipuram, March 2015

Uvaraja V C, “Experimental studies on tool profile on AA6063 Aluminum Alloy by Friction Stir Welding”, Nineth National Conference on Optimization Techniques in Engineering Sciences and Technologies (OPTEST 2014), BIT, Sathy, April 2014

Uvaraja V C, “Study of process parameters in friction stir welding of dissimilar alunimium alloys”, Nineth National Conference on Optimization Techniques in Engineering Sciences and Technologies (OPTEST 2014), BIT, Sathy, April 2014

Uvaraja V C, “Effect of process parameters on Friction stir welding of dissimilar Aluminum Alloys”, International conference on recent trends in Engineering and management, Indra Ganesan college of Engineering, Trichy, April 2014

Uvaraja V C, “Mechanicl and Micro Structural Behavior of Magnesium during Severe Plastic Deformation Process”, Nineth National Conference on Optimization Techniques in Engineering Sciences and Technologies (OPTEST 2014), BIT, Sathy, April 2014

Uvaraja V C, “Tensile and hardness properties of friction stir welding of Dissimilar Aluminium Alloy”, 3rd national conference on ÃTDM14,, Hindustan institute of technology, , Coimbatore, March 2014

Uvaraja V C, “Production “, Eighth National Conference on Optimization Techniques in Engineering Sciences and Technologies (OPTEST 2013), BIT, Sathy, April 2013

Uvaraja V C, “Effect of SiC and B4C on hardness factor of Al 7075 matrix based hybrid composite and replacing the conventional usng parking brake disc material of Off-highway dump truck”, International Conference on Recent Advances in Material Processing Technology (RAMPT13), National Engineering College, K.R. Nagar, , Kovilpatti, January 2013

Uvaraja V C, “Friction str welding of dissimilar materials between AA6061 and AA7075 alloys on the effect of process parameter”, 3rd national conference on Technical Advancement in Mechanical Engineering, Selvam College of technology,, Namakkal, April 2012

Uvaraja V C, “Comparision of Al Metal Matrix Composite Reinforced on B4C With SiC and Redmud”, Seventh National Conference on Optimization Techniques in Engineering Sciences and Technologies (OPTEST 2012), BIT, Sathy, April 2012

Uvaraja V C, “Production and Characterization of Aluminium Metal Matrix Composite Using Stir Casting”, Seventh National Conference on Optimization Techniques in Engineering Sciences and Technologies (OPTEST 2012), BIT, Sathy, April 2012

Uvaraja V C, “Optimization on Friction and Wear Process Parameters Using Taguchi Technique”, International Conference on Advances in Construction, Manufacturing and Automation Research (INCACMA 2012), Kongu Engineering College, , Perundurai, March 2012

Uvaraja V C, “Friction and Wear Behavior of Al 7075 with SiC and B4C”, International Conference on Advances in Construction, Manufacturing and Automation Research (INCACMA 2012), Kongu Engineering College, Perundurai, March 2012

Uvaraja V C, “Tribological Behaviour of Particulate Reinforced 6061 Aluminium Metal Matrix Hybrid Composite”, International Conference on Advances in Construction, Manufacturing and Automation Research (INCACMA 2012), Kongu Engineering College, , Perundurai, March 2012

Uvaraja V C, “Thermal Analysis of Brake Disc”, National Conference on Recent Trends in Mechanical Engineering (RTIME 2011), SSM College of Engineering, Komarapalayam, March 2011

Uvaraja V C, “Comparative Study of Hybrid Aluminium Composite With Reinforcement like SiC, Red Mud and B4C”, Sixth National Conference on Optimization Techniques in Engineering Sciences and Technologies (OPTEST 2011), BIT, Sathy, March 2011

Uvaraja V C, “Wear behaviour of Aluminium Matrix Composite”, Sixth National Conference on Optimization Techniques in Engineering Sciences and Technologies (OPTEST 2011), BIT, Sathy, March 2011

Uvaraja V C, “Studies on Conventional Groove SMA and GMA Welds of Dissimilar 304LN ASS and Micro-Alloyed HSLA Steels”, International Symposium for Research Scholars (ISRS), IIT-Madras, Madras

S.No.	Name of the Scholar	Register Number	Date of Reg.	Title of the Ph.D Thesis / Tentative title of the Research	Status
1	Dhanendran N	16122697145	Jun-2016	Characterisation of Banana Flower Pistil Fibre for the Potential Source of Composite Material	Completed on 22.03.2024
2	Sureshkumar P	1513269205	Jan-2015	Mechanical, Corrosion and Tribological Properties of Stir-Cast Aluminium Hybrid Metal Matrix Composites and Optimization Using Taguchi Technique	Completed on 11.10.2019
3	Mohan Kumar P	1513269815	Jan-2015	Experimental Investigation of Different Thermal Barrier Coated Engines Using Ternary Blends of Castor and Jatropha Biodiesel	Completed on 16.07.2024
4	Ramesh G	2011112030	Jan-2020	Investigations on Machine Characterisation and Tribological Behaviour of Cast Aluminium Metal Matrix Composites	Completed on 17.08.2017
5	Arivu Y	18142691325	Jan-2018	Processing and Property Evaluation of Qasi Crystalline Particles Reinforced Al Matrix Composite	Completed on 28.01.2025
6	Selvamuthukumaran D	1513269840	Jul-2015	Dissimilar Welding of Offshore Applications, Numerical and Experimental Investigation of Fibre Reinforced Composite Polymer for Mechanical and Microstructural Properties	Registration Confirmed
7	Arun Kumar R	1514269158	Jan-2015	Experimental Investigation on MMC by Casting Process	Registration Confirmed
8	Shanmugasundaram A	1514269187	Jan-2015	Experimental Analysis on MMC by Stir Casting Process	Registration Confirmed
9	Premkumar M	1517269774	Jul-2015	Numerical and Experimental Investigation of Horizontal Axis Wind Turbine (HAWT) Using Shroud Funnel Cube	Registration Confirmed

S.No.	Title	Date	Reg. No.	Status	Level	Funding Agency
1	DEVELOPMENT OF A NOVEL SOLARPOWERED ELECTRIC VEHICLE	11.02.2024	202441009127	Filed	National	Self
2	DESIGN AND FABRICATION OF SOLAR POWERED GRASS CUTTING AND SPRAYING MACHINE	03.04.2023	202341025209	Filed	National	Self
3	DESIGN AND FABRICATION OF CONTACTLESS THERMOMETER	23.12.2023	202141060470	Filed	National	Self
4	DESIGN AND FABRICATION OF CASSAVA HARVESTER	23.12.2023	202141060158	Filed	National	Self
5	DESIGN AND FABRICATION OF SAW DRONE	04.03.2023	202341014019	Filed	National	Self
6	DESIGN AND FABRICATION OF SMART BLIND STICK FOR VISUALLY IMPAIRED PERSONS	20.02.2023	202341011360	Filed	National	Self
7	DESIGN AND FABRICATION OF AUTOMATIC DIFFERENTIAL UNIT LOCKING SYSTEM	23.01.2023	202341004374	Filed	National	Self
8	DESIGN AND FABRICATION OF PORTABLE SUGARCANE BUD CHIPPER	26.12.2022	202241075474	Filed	National	Self
9	REGENERATION OF WASTE ENERGY FROM TIRE STRAIN AND RAPID CHARGING THROUGH SUPER-CAPACITOR FOR EV	13.12.2022	202241071798	Filed	National	Self
10	DESIGN AND FABRICATION OF SOLAR POWERED MULTI OPERATED AGRICULTURE MACHINE	29.12.2022	202241076741	Filed	National	Self
11	DESIGN OF ROBOTIC SNAKE	30.09.2022	202241056160	Filed	National	Self
12	IOT BASED AUTOMATED IRRIGATION SYSTEM BASED ON SOIL MOISTURE AND WEATHER REPORT USING ARDUINO	30.09.2022	202241056162	Filed	National	Self
13	DESIGN AND FABRICATION OF BRINE WATER FLASH	27.09.2022	202241055286	Filed	National	Self
14	CASSAVA PEELING MACHINE POWERED BY MAGNETIC MOTOR	22.09.2022	202241055287	Filed	National	Self
15	FRAMEWORK FOR THE PROTECTION OF CYBER - PHYSICAL SYSTEM OF ELECTIC VEHICLE CHARGING STATIONS AND THE ELECTRICITY GRID	19.08.2022	202241045388	Published	National	Self
16	DESIGN AND DEVELOPMENT OF SMART BIN MANAGEMENT SYSTEM	04.05.2023	202241060570	Filed	National	Self
17	DESIGN AND FABRICATION OF BROOM STICK MAKING MACHINE	25.03.2022	202241016833	Filed	National	Self
18	OBSTACLE DETECTION USING SENSOR FUSION AND DEEP NEURAL NETWORK FOR MOTION CONTROL OF SMART ELECTRIC	23.12.2021	202141060155/td>	Filed	National	Self
19	DESIGN AND FABRICATION OF SHAFT DRIVE BICYCLE	10.11.2021	202141046159	Filed	National	Self
20	DESIGN AND FABRICATION OF SMART SPROUT MACHINE	30.08.2021	202141039148	Filed	National	Self
21	SURFACE CHARACTERIZATION TESTER FOR POLYMER COMPOSITE MATERIALS FUNCTIONING IN ABOVE ROOM TEMPERATURE	02.03.2020	E-2/718/2020-CHE/202041008863	In Progress	State	Self
22	DESIGN OF BULB CHANGING MECHANISM FOR DOMESTIC APPLICATION	18.12.2019	E-2/4037/2019-CHE/201941052570	In Progress	State	Self

S.No.	Topic	Program	Venue	Date
1	Design of Shafts, Couplings and Keys	Guest Lecture	SNS College of Technology, Cbe.	11.07.2017
2	Design of Machine Elements	Guest Lecture	SNS College of Technology, Cbe.	15.10.2015
3	Design of Machine Elements	Guest Lecture	SNS College of Technology, Cbe.	12.08.2015
4	Optimization Technique	Guest Lecture	VSB College of Engineering and Technology, Coimbatore.	10.04.2015
5	Recent Trends in Composite Materials	Guest Lecture	VSB College of Engineering and Technology, Coimbatore.	27.01.2015

S.No.	Awards
1	Young Scientist Fellowship Award (YSFS)