Prof. Vignesh S - Bannari Amman Institute of Technology

Degree	Specialization	Institute	University	Year of Passing
B.Tech	Mechanical Engineering	SASTRA Deemed University Thanjavur	Sastra Deemed University, Thanjavur	2016
M.Tech	Advanced Manufacturing	SASTRA Deemed University Thanjavur	Sastra Deemed University, Thanjavur	2016

S No.	Subject Area
1	Optimization Techniques
2	Response Surface Methodology
3	Genetic Algorithm
4	Taguchi Methodology
5	Metallurgical Characterization
6	Composite Coatings / Co-deposition techniques
7	Design of Experiments
8	Mathematical Modeling and Simulation
9	Surface Engineering

VIGNESH S, “Design and Fabrication of Electric Power Weeder”, YMER, Vol.22, Issue. 3, pp. 1121, 2023

VIGNESH S , “Distributed Traffic control Management using MATLAB”, International Journal of Data Science and Advanced Analytics, 2022

VIGNESH S , “Experimental Analysis Of Super Boost Converter For Solar Motorized Electric Vehicle System”, MATERIALS TODAY: PROCEEDINGS, 2022

Sivabalakrishnan R., Dineshkumar M., Sharon B.P., Naveenkumar P., Vignesh S. Design and Fabrication of 3D-Printed Acrylonitrile Butadiene Styrene (ABS) Dam Automation Structure with Integrated Flood Monitoring System Using Data Analysis and Computation Techniques Advances in Materials Research. Springer Proceedings in Materials, pp. 137-145, FEB 2020.

S. VIGNESH, D. SARAVANAN, P. DINESH BABU, S. PAUL JOSHUA AN EVALUATION OF OPTIMAL PROCESS PARAMETERS OF LASER SURFACE MELTING OF AA-2024 ALLOY USING ELITIST NON-DOMINATED SORTING GENETIC ALGORITHM (NSGA-II) International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), Special Issue 7, pp. 1536-1542, JAN 2019.

S. VIGNESH, R. SIVABALAKRISHNAN, K. P. ARULSHRI, A. P. SENTHIL KUMAR ANALYSIS AND SIMULATION OF AUTOMATIC CHANGE OVER SYSTEM IN VEHICLE HEADLIGHTS FOR PREVENTION OF ROAD ACCIDENTS International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), pp. 136-140, JAN 2019.

S. VIGNESH, N. KARTHICK DEVELOPMENT OF SAFE AND ECONOMICAL FIRE DETECTION SYSTEM FOR PREVENTING ACCIDENTS AND ENSURING SECURITY WITH THE HELP OF AUTOMATED ALERT APPROACH International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), pp. 117-122, JAN 2019.

R. Sivabalakrishnan, S. Vignesh, A. P. Senthil Kumar Modelling of automatic vehicle headlight changeover (orientation and leveling) system for road safety applications International Journal of Mechanical and Production Engineering Research and Development, pp. 1468-1471, JAN 2019.

K K Megavarthini, S Vignesh, S Paul Joshua, A P Gokulraj, V Indirakumar Design and Implementation of Alert System for Monitoring the Ambient Temperature Using Cloud Computing In Hospital Regions International Journal of Recent Technology and Engineering (IJRTE), pp. 420-422, JAN 2019.

K. P. ARULSHRI, S. VIGNESH, H. R. DEVANAND, R. ELANGOVAN Design and fabrication of automated trolley with an ultrasonic sensor in order to enhance the comfort of travelers International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), pp. 767-774, JAN 2019.

S. VIGNESH, K. K. MEGAVARTHINI, V. INDIRAKUMAR, J. SOWNDHARPRAKASH, S. DHINESH DEVELOPMENT OF SECURITY ENABLED THEFT DETECTION AND ALERT SYSTEM FOR BANKS AND SHOPPING MALLS International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), pp. 1472-1475, JAN 2019.

S. VIGNESH, AKASH C. NARAYAN, K. P. ARULSHRI Design, development and analysis of wall climbing robot based on permanent magnetic adsorption with higher flexibility for hull surfaces International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), pp. 1033-1038, JAN 2019.

S Vignesh, P Dinesh Babu, G Surya, S Dinesh, P Marimuthu Development of mathematical models and optimization of the process parameters of laser surface hardened EN25 steel using elitist non-dominated sorting genetic algorithm IOP Conference Series: Materials Science and Engineering (SCOPUS), MAR 2018.

Dinesh Babu P, Vignesh S, Vignesh M, Balamurugan C Enhancement of the wear resistance of Ti-6Al-4V alloy by picosecond laser surface micro texturing process Journal of Central South University (SCI-E and SCOPUS, Listed in AU Annexure), pp. 1836-1848, AUG 2018.

S. Vignesh, P. Dinesh Babu, M. Nalla Mohamed, S. Martin Vinoth, G. Surya, S. Dinesh Investigation on the Process Parameters of Double-Sided Friction Stir Welded AA6082-T6 Joints with Different Tool Pins Using Response Surface Methodology Lecture Notes in Mechanical Engineering (SCOPUS) Chapter : Advances in Manufacturing Processes, pp. 309-319, SEP 2018.

Sivabalakrishnan R. Development of Mathematical Models and Evaluation of the Optimal Process Parameters for Laser Surface Hardening of Low Alloy Steel Using Elitist Non-dominated Sorting Genetic Algorithm Lecture Notes in Mechanical Engineering (SCOPUS) Chapter : Advances in Manufacturing Processes, pp. 583-590, SEP 2018.

S. Vignesh, Akash C. Narayan, K. P. Arulshri Design, Development and Analysis of Wall Climbing Robot based on Permanent Magnetic Adsorption with Higher Flexibility for Hull Surfaces International Journal of Mechanical and Production Engineering Research and Development, pp. 1033-1038, OCT 2018.

K. P. Arulshri, S. Vignesh, H. R. Devanand, R. Elangovan, T. Saravanakannan Design and Fabrication of Automated Trolley With an Ultrasonic Sensor in Order to Enhance the Comfort of Travellers International Journal of Mechanical and Production Engineering Research and Development, pp. 767-774, OCT 2018.

S. Vignesh, K. P. Arulshri, S. SyedSajith, S. Kathiresan, S. Boopathi, P. Dinesh Babu Design and development of ornithopter and experimental analysis of flapping rate under various operating conditions Materials Today : Proceedings, pp. 25185-25194, NOV 2018.

K Rajalashmi, S Vignesh, K.Senthilnathan Development of an Automated Side Lock System for Ensuring Safety and Security In Two Wheelers International Journal of Innovative Technology and Exploring Engineering, pp. 96-98, DEC 2018.

Dinesh Babu, P., Vignesh, S., Vignesh, M. et al. “Enhancement of wear resistance of Ti—6Al—4V alloy by picosecond laser surface micro texturing process”. J. Cent. South Univ. 25, 1836–1848 (2018). https://doi.org/10.1007/s11771-018-3873-x

S. Vignesh, P. Dinesh Babu, S. Martin Vinoth, V. Prasanna Venkatesh, P. Marimuthu Experimental investigation on the process parameters of Magnetically Impelled Arc Butt Welded T91 steel tubes Transactions of the Indian Institute of Metals (SCI-E and SCOPUS, Listed in AU Annexure), pp. 741-748, MAR 2017.

S. Vignesh, P. Dineshbabu, G. Muthukumaran, S. Martin Vinoth and K. Sureshbabu Development of mathematical models and Optimization of the laser welding process parameters using Response Surface Methodology ARPN Journal of Engineering and Applied Sciences (SCOPUS), pp.7978-7983, JUN 2016.

S. Vignesh, P. Dineshbabu, C. Balamurugan, S. Martin Vinoth Comparison of the Optimized Process Parameters of Double-Sided Friction Stir Welded Aluminium Alloy Joints Using Statistical and Evolutionary Techniques Applied Mechanics and Materials (SCOPUS), pp. 317-323, SEP 2016.

Vignesh S, “Investigations on the Working Parameters of Scara Robot”, International Conference on “Current Trends in Modernized Computing and Communication Technologies (MCCT) 2023”, SIMATS Engineering, 2023.

Vignesh S, Rajalashmi K, “Super Boost Converter for Solar Powered EV System”, International Conference on “Mechatronics in Energy and Environment Protection (ICMEEP 2021)”, BIT, 2021.

Sivabalakrishnan R, Dinesh kumar M, Sharon BP, Naveenkumar P, Vignesh S, “IoT based DAM automation with integrated floodmonitoring system using data analysis”, International conference on advances in material research , Department of Mechanical Engineering, BIT, December 2019.

G Surya, N Senthil Kumar, S Vignesh, “Effect of heat treatment on microstructure and shaping”, National Conference on Liquid Crystal and Nano-Science (NCLCNS 2018) – Sponsored by “Board of Research in Nuclear Sciences (BRNS)”, Liquid Crystal Research Laboratory, Bannari Amman Institute of Technology, August 2018.

S. Vignesh, P. M. Srihariharan, V. Gowtham, V. R. Rambarath, ” A review article on the joining of tubes using MIAB welding technique”, National Conference on Challenges and Opportunities in Sensing, Materials and Automation, Bannari Amman Institute of Technology, Sathyamangalam, March 2018.

S. Vignesh, P. Dinesh Babu, M. Nalla Mohamed, S. Martin Vinoth, G. Surya, S. Dinesh, “Investigation on the process parameters of double-sided friction stir welded AA6082-T6 joints with different tool pins using response surface methodology”, INTERNATIONAL CONFERENCE ON ENGINEERING MATERIALS, METALLURGY AND MANUFACTURING (ICEMMM 2018), SSN College of Engineering, Chennai, Department of Mechanical Engineering, February 2018.

S. Vignesh, G. Muthukumaran, P. Dinesh Babu, K. P. Arulshri, R. Sivabalakrishnan, and G. Surya, “Development of mathematical models and evaluation of the optimal process parameters for laser surface hardening of low alloy steel using elitist non-dominated sorting genetic algorithm”, INTERNATIONAL CONFERENCE ON ENGINEERING MATERIALS, METALLURGY AND MANUFACTURING (ICEMMM 2018), SSN College of Engineering, Chennai, Department of Mechanical Engineering, February 2018.

S. Vignesh, S. Paul Joshua, P. Dinesh Babu, V. Gowtham, and G. Surya, “Automated alert system for monitoring the tyre pressure to prevent road accidents due to leakage issues”, International Conference on Contemporary Design and Analysis of Manufacturing and Industrial Engineering Systems (CDAMIES 2018), National Institute of Technology, Trichy, Department of Production Engineering, January 2018.

S. Vignesh, S. Ravishankar, M. V. Thamaraikkannan, P. Thangamuthu, and P. Dinesh Babu, “Design and development of RFID based intelligent storage and retrieval system”, International Conference on Contemporary Design and Analysis of Manufacturing and Industrial Engineering Systems (CDAMIES 2018), National Institute of Technology, Trichy, Department of Production Engineering, January 2018.

N. Nagarjun, M. Surjith, S. Vignesh, “Development of silica coated tires from wasted rice husk ash for enhancing the performance of an automobile vehicle”, Second International Conference on Advances in Material Science and Technology, VIT University Vellore, Centre for Crystal Growth, October 2017.

S Vignesh, P Dinesh Babu, G Surya, S Dinesh, P Marimuthu, “Development of mathematical models and optimization of the process parameters of laser surface hardened EN25 steel using elitist non-dominated sorting genetic algorithm”, International Conference on “Advances in Materials and Manufacturing Applications (IConAMMA 2017), Amrita Vishwa Vidyapeetham, Bangalore, August 2017.

S Vignesh, K P Arulshri, S SyedSajith, S Kathiresan, S Boopathi, P Dinesh Babu, “Design and development of ornithopter and experimental analysis of flapping rate under various operating conditions”, International Conference on “Advances in Materials and Manufacturing Applications (IConAMMA 2017), Amrita Vishwa Vidyapeetham, Bangalore, August 2017.

S. Vignesh, P. Dineshbabu, S. Martin Vinoth, V. Prasanna Venkatesh, P. Marimuthu, “Experimental investigation on the process parameters of Magnetically Impelled Arc Butt Welded T91 steel tubes”, International Conference on Emerging Trends in Materials and Manufacturing Engineering (IMME 2017), National Institute of Technology, Trichy, March 2017.

V. Gowtham, S. Vignesh, P. Dineshbabu, S. Ravishankar, T. Sathyabama, “Monitoring of tyre pressure with an automated alert system to prevent road accidents due to air leakage”, International Conference on Design and Manufacturing (IConDM 2016), Indian Institute of Information Technology (IIIT), Kancheepuram, December 2016.

P. Dineshbabu, Aravind Sai Sarathy, E. Chandrasekar, S. Vignesh, C. Balamurugan, “Determination of optimal process parameters for laser surface hardening of low alloy steel using evolutionary technique”, International Conference on Design and Manufacturing (IConDM 2016), Indian Institute of Information Technology (IIIT), Kancheepuram, December 2016.

N. Karthick, S. Vignesh, N. Karthickeyan, S. Mohanraj, E. Naveenraj, “Prevention of fire accidents with the help of arduino controlled arrangement”, National conference on Recent Trends in Engineering, Technology and Management (RTETM 2016), Karpagam College of Engineering, Coimbatore, October 2016.

G. Surya, S. Vignesh, S. Tamilbharathi, S. Saravanan, K. Manikandan, “Effect of nano-fertilizer on crops to achieve sustainable growth”, State level conference on Automation Trends (ATRENDS 2016), Bannari Amman Institute of Technology, Sathyamangalam, September 2016.

D. Tharun, J. Vishnu Sankar, S. Vignesh, G. M. Oorappan, “Showing that clear displacements in railway tracks at known problem zones can be found by using low-cost MEMS accelerometers”, State level conference on Automation Trends (ATRENDS 2016), Bannari Amman Institute of Technology, Sathyamangalam, September 2016.

S. Jeyaraj, K.P. Arulshri, S. Vignesh, “Experimental Investigations and Effect studies on micro hardness of Electrodeposited Ni-Cr-W composite coatings”, International Conference on Adaptive Technologies for Sustainable Growth (ICATS 2016), Paavai Engineering College, Namakkal, May 2016.

G.S. Gowri Sankar, S. Vignesh, P. Dineshbabu, “Experimental investigation on laser surface hardening of low-alloy steel with a fiber laser source for improving the metallurgical and mechanical properties”, National conference on Advances in Mechanical Engineering (NCAME 2016), SRM University, Chennai, April 2016.

S. Vignesh, P. Dineshbabu, C. Balamurugan, S. Martin Vinoth, “Multi objective optimization of the process parameters of double-sided friction stir welded aluminium alloy joints using statistical and evolutionary techniques”, International Conference on Mechanical Engineering Design (ICMED 2016), SSN College of Engineering, Chennai, April 2016.

S. Vignesh, P. Dinesh Babu, G. Muthukumaran, S. Martin Vinoth, K. Suresh Babu, “Development of mathematical models and optimization of the laser welding process parameters using response surface methodology”, International Conference on Design, Analysis, Manufacturing and Simulation (ICDAMS 2016), Saveetha University, Chennai, April 2016.

P. Dineshbabu, Vignesh Sridhar, R. Balasubramanian, S. Vignesh, V. Vijay Shankar, “Optimization of the process parameters of laser surface hardening of low-alloy steel with a fiber laser source using response surface methodology”, National conference on advances in mechanical and materials engineering (AIMME 2016), Sri Ramakrishna College of Engineering, Coimbatore, April 2016.

S. Jeyaraj, K.P. Arulshri, S. Vignesh, P.S. Sivasakthivel, “Investigations on Influences of process parameters in Electrodeposited Nickel-Chromium powder composite coatings”, International Conference on Futuristic Innovations in Mechanical Engineering and Manufacturing Management (ICFIMEMM 2016), M. Kumarasamy College of Engineering, Karur, March 2016.

S. Kumaraguru, S. Vignesh and P. Dineshbabu, “Optimization of the process parameters of laser surface melting of an aluminium alloy using response surface methodology and genetic algorithm”, International Conference on Advances in Biotechnology, Civil and Mechanical Sciences, Selvam College of Technology, Namakkal, March 2016.

S. Jeyaraj, K. P. Arulshri, P. Gopinath, S. Vignesh, “Experimental investigations and Effects studies on Electrodeposited Nickel – weld slag composite coatings”, International Conference on Technological Advancements in Materials and Manufacturing for Industrial Environment (TAMMIE 2016), KPRIET and Mokpo National University, South Korea, March 2016.

Degree	Title	Investigator(s)	Funding Agency	Amount	Project Status	Sanction Date
1	Experimental investigation on the effect of microstructure, corrosion fatigue, nano-indentation, tribo-corrosion and bio-functionalization on pico-second and femto-second laser surface micro-textured Ti-6Al-4V alloy	Mr. Vignesh S	SERB - TEACHERS ASSOCIATESHIP FOR RESEARCH EXCELLENCE (TARE)	16,80,000	Proposal Submitted
2	Development of novel alloy with enhanced performance by melting and friction stir processing, pilot production and technology demonstration for bimetallic application		SERB - IMPRINT II	10,70,000	Proposal Submitted
3	Workshop on Scientific Research Document Preparation	Dr. S. Jegadheeswaran	AICTE - ISTE	3,00,000	Submitted
4	Development of novel alloy for electrical applications	Dr. A. Megalingam Murugan	AICTE - Research Promotion Scheme	25,00,000	Submitted
5	Fabrication, testing, validation and implementation of banana (Musa sp.) harvesting machine for the agricultural lands in Tirunelveli district	Mr. S. Vignesh	TNSCST	4,60,000	Submitted
6	Demystifying Research Metrics	Dr K L Senthil Kumar	AICTE - ISTE	3,00,000		11.03.2020

S.No.	Title	Date	Reg. No.	Status	Level	Funding Agency
1	ADVANCEMENT TECHNOLOGY TO RESOLVE THE ASPARAGUS FLORAL REAP	28.06.2022	202241036959	Filed	National	Self
2	ELEVATED FARM PRODUCT REMOVING MECHANISM	44636	202241014242	Filed	National	Self
3	Development of an integrated mechanism for the purpose of Banana plantation	06.12.2019	201941050442	Filed	National	Self
4	DEVICE FOR REPAIRING A PUNCTURED TYRE TUBE	07.01.2020	202041000664	Filed	National	Self
5	PORTABLE AUTOMATIC DEVICE FOR SEWING ABROKEN SEAM IN LEATHER GOODS	31.08.2020	202041037399	Filed	National	Self

S No.	Topic	Program	Venue	Date
1	Basics of CNC machining and its terminologies	Two-day workshop on Tooling, Machining and CNC Programming (TMCP 2017)	Bannari Amman Institute of Technology	22.08.2017
2	Scope of Aeronautical, Mechatronics Engineering in the field of research	L orientation professionnelle	JOSH Trust, Trichy	07.12.2013

S No.	Awards
1	Received EQuIP Award for showing effective leadership skills from INDIAN EXPRESS
2	Received YOUNG FIND OF THE YEAR award for excellence in social service and dedicated work towards the betterment of the society from YUVA Unstoppable
3	Received BEST COORDINATOR award from JOSH TRUST for showing dedication and involvement for three consecutive years
4	Received LEADER: SETTING A TREND award for excellence in leadership and documentation from Dr Raja Rajan, Vice President - YUVA UNSTOPPABLE
5	Received BEST PAPER award in the international conference TAMMIE2016 organized by KPRIET and MOKPO National University, South Korea
6	Secured DISTRICT FIRST in Mathematics (Centum in Paper I and II) - Declared by Directorate of Matriculation Schools, Tamil Nadu
7	Recognized as Best PG Thesis by the Project Scrutinizing Committee at SASTRA DEEMED UNIVERSITY
8	Ranked FIRST with highest Academic Performance Indicator (API) in the department for two consecutive academic years
9	Appreciated by Director-Bannai Amman Group and Principal-BIT for research achievements (Scopus indexed publications)
10	Recognized as Best 5S Coordinator for implementing 5S and Kaizen (Ranked 1st among all the departments in BIT during three consecutive audits)
11	Certified as Best 5S Zone in BIT by Mr Srivatsava, Executive Director, QCFI, Mumbai during the 5S Pre-Certification Audit for implementing and exercising new initiatives
12	Recognized as "Sirantha Vasagar - July 2017" by Makkal Sinthanai Peravai
13	Recognized as "Sirantha Vasagar - June 2017" by Makkal Sinthanai Peravai
14	Awarded "Faculty Research Fellowship" at IIT Delhi
15	Selected and Recommended by the expert committee of SEEE under the category BEST ENGINEERING COLLEGE YOUNG TEACHER AWARD among the total applications of 896 in India
16	Awarded "Summer Research Fellowship" at CSIR-CMERI, Durgapur, West Bengal