Dr Mathankumar P - Bannari Amman Institute of Technology

Smart India Hackathon 2025, 08th to 12th December 2025

Admission Enquiry 2026-2027 Information Brochure 2026-2027 For Admission Contact - 04295 226000 | +91 89401 26000

Experience Type	Organization	From	To	Total Experience
Engineering	Bannari Amman Institute of Technology, Sathyamangalam	15.06.2011

Degree	Specialization	Institute	University	Year of Passing
B.E.	Mechanical Engineering	Bannari Amman Institute of Technology	Anna University, Chennai	2008
M.E.	Manufacturing Engineering	Erode Sengunthar Engineering College	Anna University, Chennai	2011
Ph.D	Manufacturing	Bannari Amman Institute of Technology	Anna University, Chennai	2018

S No.	Subject Area
1	Non traditional machining processes(EDM)
2	Rapid prototyping
3	Ortimization techniques
4	Powder metallurgy
5	Automated manufacturing

Mathankumar P, L Selvarajan, K Venkataramanan, S Kannan, S Senthilkumar, K P Srinivasa Perumal, N L Parthasarathi And N Kasthuri, “Surface Morphology Of Silicon Nitride (Si3n4) – Titanium Nitride (Tin) Composites Using Gra-Rsm Strategy Encompassed With Edmed Parameters”, Vol.No.216, Issue No.1, 2024

Mathankumar P, Sivakumar K And Selvarajan B, “EDM Machining Effectiveness for Ti–6Al–4V Alloy Using Cu–TiB2 Ceramic Composite Electrode: A Parametric Evaluation”, Vol.No.51, Issue No.9, 45352, https://doi.org/10.1016/j.ceramint.2024.03.135, 2024

Mathankumar P, K P Srinivasa Perumal, L Selvarajan and Shailesh Shriguppikar, “Enhancing Mechanical and Morphological Properties of Glass Fiber Reinforced Epoxy Polymer Composites Through Rutile Nanoparticle Incorporation”, Vol.No.10, Issue No.3, 45413, DOI:10.1007/s40964-024-00675-0, 2024

Subramaniyan, M, Eswaran, P, Appusamy, A.M, Poovendrakumar, M, Pranesh, V.R, Sabarish, K, Sravanthi, G, “Drilling Parameters Optimization of AA2218 Based Metal Matrix Composites by Using Taguchi Method”, AIP Conference Proceedings, Vol. No.2492, 2023

Aravinth, B, Manivannan, S, Rameshkannan, C, Subramaniyan, M, Raj Kumar, V, “Performance Analysis of Vortex Tube Refrigeration System by Experimental Method”, Lecture Notes in Mechanical Engineering, Pages.669-677, 2023

Subramaniyan, M, Karuppan, S, Pethu Pon Kumar, G, Peranandhan, T, Praveen, M, “Investigation on Flexural Property of Sandwich 3D Printed PLA Components-A Review”, Materials Science Forum, Vol. No.1075, Pages.103-114, 2022

Yasin J, Selvakumars, Mathan Kumar P, R Sundaresan, K M Arunraja,”Experimental Study of TiN, TiAlN and TiSiN Coated High Speed Steel Tool”Volume 64, Part 5, 2022, Pages 1707-1710, https://doi.org/10.1016/j.matpr.2022.05.468

Raja S, Sivahari Shankar M S, Mathan Kumarp, C Rajaganapathy,”Heat Transfer Analysis and Enhancement in Shell and Tube Heat Exchanger Using Copper Oxide Nano Particles”Volume 64, Part 5, Pages 1732-1737, https://doi.org/10.1016/j.matpr.2022.05.535.2022

Yasin J, Selvakumar S, Mathan Kumar P, Sundaresan R, K M Arunraja,”Experimental Study of Tin, Tialn and Tisin Coated High Speed Steel Tool”Functional Materials for Energy, Environment and Biomedical Applications (FARAON-2022) Volume 64, Part 5, Pages 1707-1710, https://doi.org/10.1016/j.matpr.2022.05.468.2022

Mathankumar P, Paramasivam V, Radha Krishnan B, Mathalai Sundaram C, Arun Prasath K,”Investigate the Characterization and Synthesis Process of Titanium Dioxide Nanoparticles”, International Conference on Smart and Sustainable Developments in Materials, Manufacturing and Energy Engineering, https://doi.org/10.1016/j.matpr.2021.11.009

Karthikeyan S, Subbarayan M R, Mathan Kumar P, Radha Krishnan B,Sivakandhan C,”Computer Vision-Based Surface Roughness Measurement Using Artificial Neural Network”, International Conference on Latest Developments in Materials & ManufacturingVolume 60, Part 3, Pages. 1325-1328, https://doi.org/10.1016/j.matpr.2021.09.314.2022

Subramaniyan, M, Karuppan, S, Radhakrishnan, K, Rajesh Kumar, R, Saravana Kumar, K, “Investigation of Wear Properties of 3D-Printed PLA Components Using Sandwich Structure – A Review”, Materials Today: Proceedings, Vol. No.66, Pages.1112-1119, 2022

Subramaniyan, M, Karuppan, S, P, P, Anand A, P, Vasanthan A, P, “Survey on Compression Property of Sandwich 3D Printed PLA Components”, Materials Today: Proceedings, Vol. No.66, Pages.955-961, 2022

Prakash, E, Subramaniyan, M, Appusamy, A.M, Mathan Kumar, P, Dinesh, M, Naveen, M, Santhosh, C, “Review on Recent Additive Manufacturing Technologies”, Springer Proceedings in Materials, Vol. No.5, Pages.29-34, 2021

Prakash, E, Subramaniyan, M, Naveen Sankar, A.K, Chandra Kumar, K, “Additive Manufacturing Parameter Optimization with Automated Post-printing Flaw Detection Using Convolutional Neural Networks”, Springer Proceedings in Materials, Vol. No.5, Pages.127-135, 2021

Subramaniyan, M, Eswaran, P, Appusamy, A, Srimannarayana Raju, P, Rahini, V, Madhumitha, T.R, Thisha, R, “A Survey on Applications of Additive Manufacturing Techniques in Tissue Engineering”, Materials Today: Proceedings, Vol. No.45, Pages.8036-8040, 2021

Subramaniyan, M, Karuppan, S, Eswaran, P, Appusamy, A, Shankar, A.N, “State of Art on Fusion Deposition Modeling Machines Process Parameter Optimization on Composite Materials”, Materials Today: Proceedings, Vol. No.45, Pages.820-827, 2021

Eswaran, P, Subramaniyan, M, Appusamy, A, Annakalyani, N.S, Pusapati, S.R,“Investigations on Acute Angle Parts Fabricated Fusion Deposition Modelling Parts Volumetric Shrinkage and Surface Roughness”, Materials Today: Proceedings, Vol. No.45, Pages.930-935, 2021

Venkataramanan, A.R, Subramaniyan, M, Kumar, S.L, Jawahar, R.R, Prabhu, L, “Application of CCD in RSM to Obtain Optimize Treatment of Tribological Characteristics of WC-10Co-4Cr Nanoceramic Thermal Spray Coating”, Materials Today: Proceedings, Vol. No.45, Pages.6160-6170, 2020

Ramesh, A.P, Subramaniyan, M, Eswaran, P, “Review on Friction Welding of Similar/Dissimilar Metals”, Journal of Physics: Conference Series, Vol. No.1362, Issue No.1, 2019

Appusamy, A, Eswaran, P, Subramaniyan, M, “The Design and Dynamic Analysis of Active Suspension System for All-Terrain Vehicle”, International Journal of Mechanical and Production Engineering Research and Development, Vol. No.9, Pages.14-19, 2019

Subramaniyan, M, Karuppan, S, Eswaran, P, Anandhamoorthy, A, “Review on 4D Printing Materials, Stimuli and its Future Application”, International Journal of Mechanical and Production Engineering Research and Development, Vol. No.9, Pages.316-327, 2019

Appusamy, A.M, Eswaran, P, Subramaniyan, M, “Investigation on Dry Sliding Wear Behaviour of Self-Lubricating Metal Matrix Composites Reinforced with Fly Ash and Solid Lubricant”, International Journal of Recent Technology and Engineering, Vol. No.7, Issue No.4, Pages.413-416, 2019

Eswaran, P, Sivakumar, K, Subramaniyan, M, “Minimizing Error on Circularity of FDM Manufactured Part”, Materials Today: Proceedings, Vol. No.5, Issue No.2, Pages.6675-6683, 2018

Mathankumar P, “Investigation on the Performance of EDM using CRB2-CU Electrode on EN31 Steel”, Second International Conference on “Emerging Trends in Materials, Computing and Communication Technologies ‘ICETMCCT 2021”, Annai Vailankanni College of Engineering, 2021.

Mathankumar P, “Performance Analysis in EDM using TIB2-CU Electrode on Inconel Alloy”, Second International Conference on “Emerging Trends in Materials, Computing and Communication Technologies ICETMCCT 2021”, Annai Vailankanni College of Engineering, 2021.

P.Mathan Kumar, D.Dinesh, G.Sundarraju,S.Madeshwaran, “Modelling of Surface roughness in wire EDM Using Response surface Methodology Technique”, International Conference on Advances in Material Research, Bannari Amman Institute of technology, Sathy, March 2019.

N.Jaya kumar,P.Mathan kumar,K.Siva kumar and T.Ramesh, ” Diametral Overcut and Surface Roughness Analyze of Cu-Tib2 Powder Metallurgy Electrode in EDM of Monel 400 Alloy”, COPEN, IIT-Madras, Chennai, December 2017.

M. Kumar, A. Megalingam, P. Mathankumar, N. Chivaraman, B. Selvakumar, “Parametric Optimization on Electrical Discharge Machining of Al6061/Alumina/ Graphite/ Redmud Composite”, COPEN, Department of Mechanical Engineering, IIT-Madras, December 2017.

P.Mathan kumar, Dr K.Sivakumar, N.Jayakumar, “Surface Modification on OHNS Steel Using Cu-CrB2 Green Compact Electrode in EDM”, AMPCO-2017, IIT-Roorkee, Department of Metallurgical Engineering, Roorkee, November 2017.

P.Mathan kumar, “Surface Quality Modification Using Cr-Cu Green Composite Electrode During Electric Discharge Coating of OHNS”, International Conference on Emerging and Recent Technology, Department of Mechanical Engineering, Sree Sastha College of Engineering , April 2016.

P.Mathan kumar, “Parametric Study of Electric Discharge Coating Using Cr-Cu Green Composite Electrode”, OPTEST, Department of Mechanical Engineering, BIT, Sathy, March 2016.

P.Mathan kumar, “Performance Analysis of Powder Metallurgy Electrode in EDM of OHNS steel using RSM”, National conference on Emerging Technologies in Mechanical Engineering to Meet Industrial Needs, Department of Mechanical Engineering, N.S.N. College of Engineering and Technology, Karur, April 2015.

P.Mathan kumar, “Performance of Cobalt Coated Copper in Electrical Discharge Machining of Monel 400TM”, Contemporary Innovations in the Sphere of Mechanical Engineering and Management, Sri Subramanya college of Engineering and Technology, Pollachi, March 2015.

S.No.	Title	Investigator(s)	Funding Agency	Amount	Project Status	Sanction Date
1	Effective Utilization of Invasive Harmful Parthenium Weed Plant as Reinforcement for Polymer Matrix Composite Material Processed by 3D Printing Technology to Reduce Bio Diversity and save the Environment	Dr A Anandha Moorthy	TAMILNADU STATE COUNCIL FOR SCIENCE AND TECHNOLOGY	Rs 1,40,000/- (One Lakes Forty Thousand Only)	Submitted
2	Proposal submitted under Symposia Grant Scheme for Organizing an International conference on Advances in materials and research (ICAMR-2019)	Dr M Ravikumar	CSIR-Symposium Grant	50000		17.10.2019
3	INVESTIGATIONS ON EFFECTIVE UTILIZATION OF VEGETABLE OIL AS LUBRICANT WITH NATURAL AND NANO METAL ADDITIVES	A Anandha Moorthy	TNSCST - DST	1400000

S.No.	Title	Date	Reg. No.	Status	Level	Funding Agency
1	DESIGN OF FLEXIBLE LAPTOP STAND	13.12.2023	396050-001	Published	National	Self
2	MULTI-UTILITY PEN STAND	05.02.2024	406613	Filed	National	Self
3	DESIGN OF FLEXIBLE LAPTOP STAND	26.09.2023	396050-001	Filed	National	Self
4	A DEVICE TO CONVERT HEAVE RESPONSE OF BUOY TO SELECTIVELY INDUCE ONE-WAY VERTICAL DISPLACEMENT ON A SUBMERGED BODY	09.04.2019	201941014060	In Progress	International	BIT

S No.	Topic	Program	Venue	Date
1	Bacis of electric discharge machining	Two day workshop by Manufacturing focus group	Smart class room	13.09.2017
2	Recent trends and applications of Rapid prototyping technology	Advances in RPT	New mechanical seminar hall	14.08.2015