Dr Madheswaran S - Bannari Amman Institute of Technology

Experience Type	Organization	From	To	Total Experience
Engineering	Bannari Amman Institute of Technology, Sathyamangalam	08.06.2015
Industry	LUCAS TVS CHENNAI	15.05.2006	14.05.2007	1 Year & 0 Month(s)

Degree	Specialization	Institute	University	Year of Passing
B.E	Mechanical Engineering	Muthayammal Engineering College	Anna University, Chennai	2010
M.E	Engineering Design	Government College of Technology, Coimbatore	Anna University, Chennai	2015
Ph.D	Mechanical Engineering	Bannari Amman Institute of Technology, Sathyamangalam	Anna University, Chennai	2025

S.No.	Subject Area
1	Additive manufacturing-3D printing
2	Rapid Prorotyping

Madheswaran Subramaniyan, Sivakumar Karuppan, Anandhamoorthy Appusamy, Nagarajan Pitchandi, “Sandwich Printing of PLA and Carbon Fiber Reinforced-PLA for Enhancing Tensile and Impact Strength of Additive Manufactured Parts”, Journal of Manufacturing Processes”, Volume 137, 15 March 2025, Pages 425-436, https://doi.org/10.1016/j.jmapro.2025.02.001.”

Appusamy Anandha Moorthy , Subramaniyan Madheswaran, Ganesh Babu L, Murthi M K , Nanthakumar S, and Kallipatti Laxmanan Senthilkumar, Andiappan Selvakumar,”Analyzing Experimentally the Dynamic Characteristics of Journal Bearings Under Various Load Conditions”, ” International Conference on Materails Innovation in Engineering and Technology ( ICMIET 2024), Volume No.2925 (2024) 012020, Issue No. 1, Pages 1-12, DOI. 10.1088/1742-6596/2925/1/012020, 2024.

Anandha Moorthy A, Senthil Kumar K L, Balaji Ayyanar C BALAJI Ayyanar, Madheswaran S, “HDPE/Hydroxyapatite/Zeolite Composite – Characterization and in Vitro Cytotoxicity”, Polimery 2024, 69, nr 6, DOI: https://doi.org/10.14314/polimery.2024.9.4.

Madheswaran S, Anandha Moorthy A, Senthil Kumar L, Pon Maheskumar, Suresh Kumar K, Girimurugan R, “A Critical Review on Polymer Composites Reinforced With Artificial Fibers Using Fused Deposition Modelling” , Vol. 13(3), 440-448 (2024)https://doi.org/10.13074/jent.2024.09.242707

Madheswaran S, Karuppan Sivakumar, Helaili Sofiene,Ahmad Irfan, “Structural, Mechanical, and In-Vitro Characterization of Hydroxyapatite Loaded PLA Composites”, Journal of Molecular Structure, Volume 1306, article id. 137862, 10.1016/j.molstruc.2024.137862.

Anandha Moorthy A, Madheswaran S, Sivakumar K, “Effect of Different Fillers on Mechanical Properties of Fdm-Printed Layered Pla Parts”, Polimery, Vol. No.69/2, Issue No.2, 2024

Madheswaran S ,Prakash E, Aanadha Moorthy A, poooovendrakumar M, V R Pranesh, K Sabarish,G Sravanthi,”Drilling Parameters Optimization of Aa2218 Based Metal Matrix Composites by Using Taguchi Method”AIP Conf. Proc. 2492, 040070 (2023)https://doi.org/10.1063/5.0113683

Madheswaran S, Sivakumar K, Prabanjan P, Pugazh Anand A , Pynthamizh Vasanthan A,”Survey On Compression Property of Sandwich 3d Printed Pla Components Volume 66, Part 3, Pages 955-961https://doi.org/10.1016/j.matpr.2022.04.749.2022,

Sivakumar K, Madheswaran S, Pethu Pon Kumar, G Praveen M,”Investigation on Flexural Property of Sandwich 3d Printed Pla Components – A Review”Materials Science Forum1075(3):103-114DOI: 10.4028/p-o3sr48o3sr48.2022

Madheswaran S, Sivakumar K, Radhakrishnan K, Rajesh Kumar R ,Saravana Kumar K,”Investigation of Wear Properties of 3d-Printed Pla Components Using Sandwich Structure – A Review” International Conference on Thermal Analysis and Energy Systems Volume 66, Part 3https://doi.org/10.1016/j.matpr.2022.04.913 , 2022, Pages 1112-1119.2021

Madheswaran S, Sivakumar K, “Mechanical Properties of Sandwich Products Obtained by 3d Printing from Pla-Pla/Al2 O3”, Vol.No.68, Issue No.1, 45292, DOI: 10.14314/polimery.2023.11.9

Madheswaran S,, Sivakumar K, Prakash E,” Applications of Additive manufacturing-A Review” Springer Advances in Materials Research, Pages. 21-27, 2021.

S. K. Dhinesh, K. L. Senthil Kumar, K.S. Prasad, M. Raghunath,S. Madheshwaran, A. P. Gokulraj, Saravanan M,” Design And Fabrication Of Arduino Controlled CNC Foam Cutting Machine “,International Journal of Aquatic Science, Pages. 1545-1557, 2021.

Madheswaran S,, Prakash Eswaran, Anandhamoorthy Appusamy,” A survey on applications of additive manufacturing techniques in tissue engineering”, Materials today Proceeding, Pages. 8036-8040, 2021.

Anandha Moorthy Appusamy,E. PrakashS, Madheswaran Subramaniyan,” Characterization and Fabrication of ABS and PLA-Based Polymer Matrix Composites Using 3D Printing”, Springer Nature Singapore Pte Ltd, Pages. 499-510, 2021.

Prakash E,Madheswaran Subramaniyan, Anandha Moorthy Appusamy , P. Mathan KumarM. DineshM. Naveen,”Review on Recent Additive Manufacturing Technologies”, Springer Nature Singapore Pte Ltd, Pages. 29-34, 2021.

Anandha Moorthy Appusamy et al,” Characterization and Performance Analysis of Graphite and Molybdenum Disulphide Based Hybrid Composite Materials”, IOP Conference Series: Materials Science and Engineering, 2020.

Anandha Moorthy Appusamy*, Prakash Eswaran, Madheswaran Subramani, Santhanakumar Sadaiappan, Karthik Shanmugavel,” Enhancing the Tribological Properties of Talc and BoronNitride based Composites by T6 – Heat Treatment”, IOP Conference Series: Materials Science and Engineering, 2020.

Author links open overlay panelAnandha Moorthy,Appusamy,” Invasive Parthenium Weed as Reinforcement in Polymer Matrix Composite to Reduce its Environmental Impact”, Materials Today Proceedings, 2020.

Madheswaran Subramaniyan, Sivakumar Karuppan, Prakash Eswaran, Anandhamoorthy Appusamy,” State of Art on Fusion Deposition Modeling Machines Process Parameter Optimization on Composite Materials”, Materials Today: Proceedings, 2020.

Prakash Eswaran, Madheswaran subramaniyan, Anandhamoorthy Appusamy,” Investigations on Acute Angle Parts Fabricated Fusion Depostion Modelling Parts Volumetric Shrinkage and Surface Roughness”, Materials Today Proceedings, 2020.

Madheswaran Subramaniyan,” Application of CCD In RSM to Obtain Optimize Treatment of Tribological Characteristics of WC-10Co-4Cr Nanoceramic Thermal Spray Coating”, Materialstoday proceedings, 2020.

Anandha Moorthy Appusamy, Prakash Eswaran,” Investigation on Dry Sliding Wear Behaviour of Self-Lubricating Metal Matrix Composites”, International Journal of Recent Technology and Engineering(TM), Pages. 90-94, 2019.

A Anandha Moorthy Appusamy,” The Design and Dynamic Analysis of Active Suspension System for All-Terrain Vehicle”, International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), Pages. 14-19, 2019.

Madheswaran Subramaniyan , Prakash Eswaran , Sivakumar Karuppan,” Review on 4d Printing Materials, Stimuli and its Future Application”, International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), Specical Issue 1, Pages. 316-327,2019.

Madheswaran Subramaniyan ,”Design of Domestic Incinerator for the Safe Disposal of Menstrual Waste in the Rural Areas”, International Journal of Research in Engineering, Science and Management, Pages. 200-203, 2019.

Anandha Moorthy Appusamy, Prakash Eswaran, Madheswaran Subramani , Santhanakumar Sadaiappan,” Experimental studies on Mechanical properties and Characterization of Parthenium Short Fibre Reinforced Polymer Matrix Composites”, International Journal of Engineering and Advanced Technology (IJEAT), Pages. 94-97, 2019.

Aswin Pranav Ramesh, Madheswaran Subramaniyan,” Review on Friction Welding of Similar/Dissimilar Metals”, Journal of Physics, 2019.

E Prakash, K Sivakumar, S Madheswaran,” Minimizing Error on Circularity of FDM Manufactured Part”, Materials Today Proceedings, Pages. 6675-6683, 2018.

Madheswaran Subramaniyan, Sivakumar Karuppan, Prakash Eswaran, Anandhamoorthy,” State of the Art on Additive Manufacturing (3d Printing) Technology Fiber Reinforced Abs, Pla, Pp, Polymer Composite in Fusion Deposition Modeling (FDM)”, International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), Pages. 629-641, 2018.

Prakash Eswaran, Madheswaran Subramaniyan, Anandhamoorthy Appusamy,”Investigations on Surface Roughness and Volumetric Shrinkage of Acute Angle Parts Fabricated with Fusion Deposition Modelling”, International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), Pages. 440-447, 2018.

Madheswaran,” Design and Fabrication of Banana Fiber Extracting Machine”, – International Journal for Scientific Research, Pages. 390-393, 2018.

Madheswaran S, “Optimization and Decision Analytics Approaches in Industrial Management and Manufacturing Supply Chain Systems: An Operations Research Perspective”,”6th International Conference On Advances in Mechanical Engineering (ICAME-2026)”, SRM Institute of Science & Technology, 2026.

Madheswaran S, “Computer-Aided Model Validation and Performance Improvement of Submersible Pump Through Flow Simulation”, International Conference on “Advanced Materials and Technologies for Industry 4.O –“, ICAMT 4.O”, BIT, 2023.

Madheswaran S, “Hardware Design and Implementation of Braille Embosser”, National Conference on “Recent Advances in Communicative Electronics”, SRM TRP Engineering College, 2023.

Madheswaran S, Dhinesh S K, Senthil Kumar K L, Raghunath M, “Design and Fabrication of Arduino Controlled CNC Foam Cutting Machine”, Second International Conference on New AĀE Systems and Automation Technoloaies- (ICNAAT) 2021”, BIT, 2021.

Madheswaran S, “Drilling Parameters Optimization of AA2218 Based Metal Matrix Composites By using Taguchi Method”, International Conference on “Aero Mechanical Materials for Manufacturing”, Marri Laxman Reddy Group of Institution, 2021.

Madheswaran S, “Drilling Parameters Optimization of Aa2218 Based Metal Matrix Composites By Using Taguchi Method”, International Conference on “Advances in Materials Research – 2021 (ICAMR 2.0)”, BIT, 2021.

Madheswaran S, “Investigation of Wear Property of 3d-Printed PLA Components using Sandwich Structure- A Reviewe”, International Conference On Advances In Materials Research – 2021 (ICAMR 2.0)”, BIT, 2021.

Madheswaran S, “Survey on Compression Property of Sandwich 3D Printed PLA Components”, International Conference on “Advances in Materials Research – 2021 (ICAMR 2.0)”, BIT, 2021.

Madheswaran S, “Investigation on Flexural Property of Sandwich 3D Printed PLA Components- A Review”, International Conference On Advances In Materials Research – 2021 (ICAMR 2.0)”, BIT, 2021.

Dhinesh S K, Senthil Kumar K L, Prasad K S, Gokulraj A P, Raghunath M, Madheswaran S, Saravanan M., “Design and Fabrication of Arduino Controlled CNC Foam Cutting Machine”, Second International Conference on New Age Systems and Automation Technologies – ICNAAT-2021, ECE Department – ICNAAT-2021, Erode, July 2021.

MADHESWARAN SUBRAMANIYAN, “TRIBOLOGICAL INVESTIGATION ON PLA COMPOSITE MATERIALS”, International conference on Advancements in Automotive Technology (ICAAT) 2021, Bannari Amman Institute of Technology, Sathyamangalam, March 2021.

MADHESWARAN SUBRAMANIYAN,, “ADDITIVE MANUFACTURING TECHNIQUES LATEST SURVEY IN MEDICAL FIELD TISSUE ENGINEERING”, International Conference on Applied science, Technology, Management and Language studies, SONA college of Technology, Salem, December 2020.

Madheswaran S, “Additive Manufacturing Techniques Latest Survey in Medical Field Tissue Engineering”, International Conference on Materials, Manufacturing and Machining for Industry 4.0, BIT, Sathyamangalam, October 2020.

MADHESWARAN S, “Review on Research work in wear analysis of 3D printed composites”, International Conference on Technologies for Green Mobility 2020, Bannari Amman Institute of Technology, Sathyamangalam, September 2020.

Anandha Moorthy Appusamy, Prakash Eswaran, Madheswaran Subramaniyan, Arunkumar Rajamanickam, Vinoth Kumar Selvakumar and Vijaya Prasanth , “Invasive Parthenium Weed as Reinforcement in Polymer Matrix Composite to Reduce the Environmental Impact”, ICAMR2019, BIT, Sathyamangalam, December 2019.

Anandha Moorthy Appusamy, Prakash Eswaran, Madheswaran Subramaniyan, Arunkumar Rajamanickam, Vinoth Kumar Selvakumar and Vijaya Prasanth , “Characterization and Fabrication of Nylon and PLA Based Polymer Matrix Composites Using 3D Printing “, ICAMR2019, Department of Mechanical Engineering, BIT, Sathyamangalam, December 2019.

Prakash Eswaran, Naveen Shankar Annakalyani, Anandha Moorthy Appusamy, Madheswaran Subramaniyan, “Accelerated Process Monitoring in Additive Manufacturing using Voxel-based Visual PatternMining with Convolutional Neural networks “, International Conference on Advances in Materials Research (ICAMR 2019) , Department of Mechanical Engineering, Bannari Amman Institute of Technology, Sathyamangalam , December 2019.

Madheswaran Subramaniyan, Sivakumar Karuppan, Prakash Eswaran, Anandha Moorthy Appusamy and Naveen Shankar Annakalyani, “State of art on Fusion Deposition Modeling Machines Process Parameter Optimization on Composite Materials”, International Conference on Advances in Materials Research (ICAMR 2019), Department of Mechanical Engineering, Bannari Amman Institute of Technology, Sathyamangalam, December 2019.

Anandha moorthy Appusamy a , Prakash Eswaran a , Madheswaran Subramaniyan a , Sasikumar C , Girimurugan R b and Vairavel M b a, “Experimental Investigations on Mechanical Properties of Egg Shell Particles Reinforced Epoxy Resin Composites “, International Conference on Advances in Materials Research (ICAMR 2019) , Department of Mechanical Engineering, Bannari Amman Institute of Technology, Sathyamangalam, Sathyamangalam, December 2019.

Madheswaran Subramaniyan, Prakash Eswaran, Anandha moorthy Appusamy, Madhan kumar P,Pusapati Srimannarayana Raju, Sivakumar Karuppan , “Mechanical properties review on Natural fibre reinforced polymers on 3D printing “, International Conference on Advances in Materials Research (ICAMR 2019) , Department of Mechanical Engineering, Bannari Amman Institute of Technology, Sathyamangalam , December 2019.

Madheswaran Subramaniyan, Prakash Eswaran, Anandha moorthy Appusamy, Pusapati Srimannarayana Raju, Naveen Sankar Anna kalyani , “Drilling Parameter Optimization of Composite Material “, International Conference on Advances in Materials Research (ICAMR 2019) , Department of Mechanical Engineering, Bannari Amman Institute of Technology, Sathyamangalam , December 2019.

Prakash Eswaran, Madheswaran Subramaniyan, Anandhamoorthy Appusamy, Naveen Sankar Annakalyani, Pusapati Srimannarayana Raju , “Investigations on Surface Roughness and Volumetric Shrinkage of Acute Angle Parts Fabricated with Fusion Deposition Modelling”, International Conference on Advances in Materials Research (ICAMR 2019), Sathyamangalam, December 2019.

Appusamy Anandha Moorthy, “Experimental Studies on Mechanical Behaviour of Poly Lactide (PLA) – Al2O3 Composites”, ICAMR 2019, Dept of Mech Engg, BIT, December 2019.

Anandha Moorthy Appusamy, “EFFECT OF HEAT TREATMENT ON TRIBOLOGICAL PROPERTIES OF TALC AND BORON NITRATE BASED COMPOSITE MATERIALS”, ICAMPC-2019 , Dept of Mechatronics Engineering, BIT, September 2019.

Anandha Moorthy Appusamy, “CHARACTERIZATION AND PERFORMANCE ANALYSIS OF GRAPHITE AND MOLYBDENUM DISULFIDE”, ICAMPC 2019, Dept of Mechatronics Engg, BIT, September 2019.

Aswin Pranav Ramesh, Madheswaran Subramaiyam, Prakash Eswaran, “Review on Friction Welding of Similar / Dissimilar Metals”, International conference on Emerging Technique in Engineering Technology and Management 2019, Rathinam Technical Campus, Coimbatore, March 2019.

Arjun S V Akash, ArunKumar, Madheswaran, “Co-Axial Rotor and Coanda Effect”, National conference on TECHNOLOGIES FOR GREEN MOBILITY 2019, BIT, BANNARI AMMAN INSTITUTE OF TECHNOLOGY, March 2019.

Madheswaran Subramaniyan, “Investigation of filament fabrication of ABS and Carbon fiber”, Emerging trends in Engineering and Technology, NANDHA-PERUNDURAI, NANDHA COLLEGE OF TECHNOLOGY, March 2019.

Dr A Anandha Moorthy, “Experimental Studies on Parthenium Short Fiber Reinforced Thermoplastic Composite Materials Prepared by Additive Manufacturing Process”, Recent Trends in Nanomaterials for Energy, Environmental and Engineering Applications (ICONEEEA – 2K19), K-Ramakrishnan College of Technology, Trichy, March 2019.

P.Mathan Kumar, D.Dinesh, G.Sundarraju,S.Madeshwaran, “Modelling of Surface roughness in wire EDM Using Response surface Methodology Technique “, International Conference on Advances in Material Research , Bannari Amman Institute of technology, Sathy, March 2019.

Madheswaran S, “Investigation of surface roughness and volumetric shrinkage of acute angle fabricated with fusion deposition modeling”, International conference on advance in industrial engineering application ICAIEA2018, Anna University, Chennai, January 2018.

Madheswaran S, “Prediction system for investigation process parameters on dry sliding of self-lubricating metal matrix composite”, International conference on advance in industrial engineering application ICAIEA2018, Anna University, Chennai, January 2018.

Madheswaran S, “Vibration based condition Monitoring of Plain Bearings subjected to radial load”, Second Indo Brazil Bilateral conference on Advance materials and Processing (AMP17), Kalasalingam University, Madurai, March 2017.

A Anandha Moorthy, T Ramesh Kumar, G Senthilkumar, and S Madheswaran, “Vibration Based Condition Monitoring of Plain Bearings Subjected to Radial Load”, Bilateral Second International Conference of Advanced Materials , Department of Mechanical Engineering, Kalasalingam University-KLU, India and Departmento de Engenharia Automotiva, Faculdade Gama Universidade de Brasilia-UnB, Brasilia, Madurai, March 2017.

Madheswaran S, “Choco 3D Printer”, National conference on Technology Green Trend Mobility, Bannari amman Institute of technology, Satrhyamangalam, March 2017.

Madheswaran subramaniyan, “Minimizing error on circularity and volumetric shrinkage of FDM manufactured parts”, International conference on emerging trends in materials and manufacturing engineering, National Institute of Technology (NIT) Trichy, March 2017.

Madheswaran subramaniyan, “Optimization of Process parameters in selective laser sintering using genetic algorithm”, NAFEMS international conference on engineering, modeling, analysis, simulation , Dayananda Sagar University, Bangalore, August 2016

Madheswaran subramaniyan, “Design and analysis on mechanical and thermal properties on honeycomb sandwich structure”, International conference on emerging researches in engineering and technology, Kalaivani college of technology, Coimbatore, March 2015.

Madheswaran subramaniyan, “Reliability Based optimization of Factors influencing the Process parameter of Inconel 718”, Second International Conference on Engineering technology and science, Muthayammal College of Engineering, Namakkal, March 2015.

S.No.	Title	Investigator(s)	Funding Agency	Amount	Project Status	Sanction Date
1	Effective Utilization of Invasive Harmful Parthenium Weed Plant as Reinforcement for Polymer Matrix Composite Material Processed by 3D Printing Technology to Reduce Bio Diversity and save the Environment	Dr A Anandha Moorthy	TAMILNADU STATE COUNCIL FOR SCIENCE AND TECHNOLOGY	Rs 1,40,000/- (One Lakes Forty Thousand Only)	Submitted
2	Proposal submitted under Symposia Grant Scheme for Organizing an International conference on Advances in materials and research (ICAMR-2019)	Dr M Ravikumar	CSIR-Symposium Grant	50000		17.10.2019
3	INVESTIGATIONS ON EFFECTIVE UTILIZATION OF VEGETABLE OIL AS LUBRICANT WITH NATURAL AND NANO METAL ADDITIVES	A Anandha Moorthy	TNSCST - DST	1400000

S.No.	Title	Date	Reg. No.	Status	Level	Funding Agency
1	EXTENDABLE PAPAYA FRUIT PICKER WITH CONTAINER	30.03.2023	202341023774	Filed	National	Self
2	TRIMMER HAIR COLLECTOR	07.10.2022	202141015569	Published	National	Self
3	EXTENDABLE SAPODILLA FRUIT PICKER WITH STORAGE BAG	07.10.2022	202141014249	Published	National	Self
4	DUSTER WITH INTEGRATED WATER CARTRIDGE	07.10.2022	202141014251	Published	National	Self
5	3D PRINTING REUSABLE SPOOL WHEEL WITH SELF LOCKING MECHANISM	07.10.2022	202141015565	Published	National	Self
6	SPLIT COMB	07.10.2022	202141014250	Published	National	Self
7	INTEGRATED COMBINATIONAL LOCK FOR TROLLEY BAGS	23.09.2022	202141011274	Published	National	Self
8	MULTI-BULB CHANGER KIT	16.09.2022	202141010220	Published	National	Self
9	RICE STAINER	29.08.2022	202241049161	Filed	National	Self
10	DESIGN AND FABRICATION OF RICE SERVING SPOON CLEANER	26.08.2022	202141007318	Published	National	Self
11	ACTION HELMET CAMERA MOUNT	05.05.2022	202241026128	Filed	National	Self
12	SMALL ONION PEELER	20.09.2021	202141042458	Filed	National	Self
13	A DEVICE TO ARREST TAP WATER LEAKAGE	09.08.2021	202141035801	Filed	National	Self
14	NAIL CUTTER WITH NAIL COLLECTOR	17.03.2021	202141011275	Published	National	Self
15	AN APPARATUS TO COAT AND DE-COAT 3D PRINTING FILAMENT	31.12.2017	201841000060	Filed	National	Self
16	AN INTELLIGENT PORTABLE MOSQUITO REPELLENT DEVICE	05.02.2019	201941004502	Filed	National	Self
17	Mechanism for Borewell pipe assembling and dismantling	31.05.2019	201941024373	Filed	State Level	Self
18	Design and Fabrication of Rice Serving Spoon Cleaner	22.02.2021	202141007318	Filed	National	Self
19	Multi-bulb Changer Kit	11.03.2021	202141010220	Filed	National	Self
20	NAIL CUTTER WITH NAIL COLLECTOR	17.03.2021	202141011275	Filed	National	Self
21	INTEGRATED COMBINATIONAL LOCK FOR TROLLEY BAGS	17.03.2021	202141011274	Filed	National	Self
22	Duster with Integrated Water Cartridge	30.03.2021	202141014251	Filed	National	Self
23	Extendable Sapodilla Fruit Picker with Storage Bag	30.03.2021	202141014249	Filed	National	Self
24	Helmet with inbuilt Automatic Locking System	30.03.2021	202141014252	Filed	National	Self
25	Split Comb	30.03.2021	202141014250	Filed	National	Self
26	Trimmer-Hair Collector	01.04.2021	202141015569	Filed	National	Self
27	3D Printing Reusable Spool Wheel with Self-Locking Mechanism	01.04.2021	202141015565	Filed	National	Self
28	Human Effort Reduction Attachment for Cutting Plier	22.04.2021	202141018552	Filed	National	Self
29	Multi-Functional Tool for the Extruder Unit of a 3D Printer	07.06.2021	202141025200	Filed	National	Self
30	A Device to Arrest Tap Water Leakage	09.08.2021	202141035801	Filed	National	Self

S.No.	Topic	Program	Venue	Date
1	Design to Reality Hands on Training with 3d Printing and Laser Cutting	Guest Lecture	Surya Engineering College	11.11.2025
2	Modeling 3D Objects Using Blender	Guest Lecture	Erode Sengunthar Engineering College	14.10.2025
3	Research Opportunities In Additive Manufacturing Technology	International Conference	Kongunadu Polytechnic College, Dindigul	11.11.2022
4	Additive Manufacturing in Automobile Applications	Workshop	BIT	01.09.2021
5	Welding Based Additive Manufacturing	One week virtual faculty development Program on 3D Printing for Industrial Applications	GOOGLE MEET JKKMCT	07.09.2020
6	Workshop on 3D printing technology	Oneday workshop and Hands on training on 3D printing	Erode Sengunthar Engineering college	06.02.2020
7	Workshop on 3D printing	Workshop on 3D printing	CSI Engineering college, Ketti, ooty	10.10.2019
8	Application of Reverse engineering in Automotive Industries	ISTE Sponsored one day workshop on Applications of 3D Printing in Automotive and Medical Industry	BIT-Department of Mechanical Engineering	30.08.2019
9	3D Printing in Rapid Prototyping	One Day Workshop	Srinivasan Engineering College	31.08.2018
10	Status challenges and features of additive manufacturing in 3D printing	One day workshop	Dhanalaxmi Srinivasan Engineering college-Perambalur	23.09.2015

S.No.	Membership Number	Membership Body	Year	Duration
1	LM 119821	The Indian Society for Technical Education	2017	Life Time