Dr Dinesh D - Bannari Amman Institute of Technology

Smart India Hackathon 2025, 08th to 12th December 2025

Admission Enquiry 2026-2027 Information Brochure 2026-2027 For Admission Contact - 04295 226000 | +91 89401 26000

Experience Type	Organization	From	To	Total Experience
Engineering	Bannari Amman Institute of Technology, Sathyamangalam	15.06.2011
Industry	Diamond Metal Works	06.07.2007	10.06.2008	0 Year(s) & 11 Month(s)
Industry	Rialto Enterprises Pvt.Ltd	15.06.2006	02.07.2007	1 Year & 0 Month(s)
Industry	Ankar Engineers and Fabrications Pvt.Ltd	01.11.2005	30.04.2006	0 Year(s) & 6 Month(s)

Degree	Specialization	Institute	University	Year of Passing
B.E	Mechanical	Jayam College of Engineering and Technology	Anna University, Chennai	2005
M.E	Computer Aided Design	Mahendra Engineering College	Anna University of Technology, Coimbatore	2011
Ph.D	Mechanical Engineering	Bannari Amman Institute of Technology	Anna University, Chennai	2024

S No.	Subject Area
1	Friction stir Processing
2	Composite Materials
3	Tribology

Dinesh D, Surya G, Habelalmateen I, Kalaivaani P. C. D, Venkatesh C & Shrivastava A, “Artificial Intelligent based Self Driving Cars for the Senior Citizens,” 2025 7th International Conference on Inventive Material Science and Applications (ICIMA), Namakkal, India, Sep 2025, pp. 1469-1473, DOI: 10.1109/ICIMA64861.2025.11073845.

Mogana Priya C, Gobinath V K, Rajasekar R, Dinesh D, Prakash T, Saravana Kumar J, “A Study on the Influence of Functionalized Graphene on the Mechanical and Biocompatibility Performance of Electrospun Polyvinyl Alcohol Nanocomposites” , Vol. 17,No. 4 (Special Issue), 2024,7532

Dinesh D, Rajasekar R, Vijayakumar V, Prakashraj and M Pavithra K, “Experimental Investigation of Date Seed and Neem Powder Reinforced Natural Fiber Composites”, 45383, DOI: 10.5755/j02.ms.34033

Dinesh D, S Saravana Kumar, Prakash K B, Muhammad Mahmood Ali, P Manoj Kumar , “Optimizing Friction Stir Processing Parameters for Aluminium Alloy 2024 Reinforced with SiC Particles: A Taguchi Approach of Investigation”, Vol.No.30, Issue No.1, 45383, DOI: 10.1016/j.jmrt.2024.04.066

Dinesh, D, Nithin Mowshik, A, Meyyappan, M, Kowtham, M, “Analysis of Universal Gas Leak Detector of Hazardous Gases Using IOT”, Materials Today: Proceedings, Vol. No.66, Pages.1044-1050, 2022

Jayahariharapranav, P, Dinesh, D, Mathankumar, P, Rajamurugan, G, Jayakumar, N, “Effect of Titanium Di-Boride/Copper (TiB2-Cu) Electrode on the Machinability of OHNS Steel by EDM Process”, IOP Conference Series: Materials Science and Engineering, Vol. No.1059, Issue No.1, 2021

Dinesh, D, Megalingam, A, “Dry Sliding Friction and Wear Behaviour of Leaded Tin bronze for Bearing and Bushing Application”, Archives of Metallurgy and Materials, Vol. No.66, Issue No.4, Pages.1095-1104, 2021

Dinesh D, Sangaravadivel P, R Jeevith M, Kishore, N Deepith and M Srikanth,”Investigation of Inconel 718 on Electrical Discharge Machining Using Copper and Copper Alloy-Tungsten Disulfide Electrodes”International Conference on Trends in Automotive Parts Systems and Applications https://doi.org/10.4271/2023-01-5149

Mathan Kumar, P, Dinesh, D, Sundarraju, G, Madheswaran, S, Perumal, K, “Modelling of Surface Roughness in Wire-EDM Using Response Surface Methodology Technique”, Springer Proceedings in Materials, Vol. No.5, Pages.791-799, 2021

“Dinesh D, Nithin A, Mowshik M, Meyyappan and Kowtham M,”Analysis of Universal Gas Leak Detector of Hazardous Gases Using IOT””Volume 66, Part 32022, Pages 1044-1050https://doi.org/10.1016/j.matpr.2022.04.837 “

Moorthy, A.A, Nanjappan, N, Ayyanar, C.B, Dinesh, D, “In Vitro Cytotoxicity Examination of the Seashell and Fish Scale Substances Embedded with High Degree of Compactness isn Polyethylene Composite”, Journal of Engineering Research (Kuwait), Vol. No.9, 2021

Rajamurugan, G, Ghosh, P.K, Krishnasamy, P, Dinesh, D, Vinukumar, S.M, “Thermal and Weld Bead Characteristics of Bead-on-Plate PGMA Welding of Dissimilar ASS Bead on HSLA Plate”, Transactions of the Indian Institute of Metals, Vol. No.74, Issue No.1, Pages.89-106, 2021

Rajasekar R, Dinesh D, Kowtham D, Santhosh D, Moganapriya D, K P Boopathiraja,”Enhancement of Polycrystalline Silicon Solar Cell’s Efficiency Through Electrospinning Coating Using Erbium Oxide” International Conference on Trends in Automotive Parts Systems and Applicationshttps://doi.org/10.4271/2023-01-5163

Rajamurugan, G, Ghosh, P.K, Prabu, K, Dinesh, D, Vinukumar, S.M, “Dendrite Morphological Analysis on SMA, GMA, and PGMA Welding of Dissimilar 304LN Austenitic Stainless Steel and Micro-alloyed Steel”, Transactions of the Indian Institute of Metals, Vol. No.73, Issue No.3, Pages.595-611, 2020

Kishore, P, Kumar, P.M, Dinesh, D, “Wear Analysis of Al 5052 Alloy with Varying Percentage of Tungsten Carbide”, AIP Conference Proceedings, Vol. No.2128, 2019

Dinesh, D, Megalingam, A, Rajamurugan, G, Arundeep, M, Tajdeen, A, “Evaluation of Microstructure and Tribological Characterization of Friction Stir Processed Al 6063 / B4C+SiO2 Composites”, AIP Conference Proceedings, Vol. No.2128, 2019

Rajamurugan, G, Dinesh, D, Ramakrishnan, A, “A Comparative Study on Grain Size and HAZ Width of GMA and PGMA Welds of Dissimilar Ass and HSLA Steel Plates”, International Journal of Mechanical and Production Engineering Research and Development, Vol. No.8, Issue No.Special Issue 7, Pages.1641-1649, 2018

Dinesh, D, Baskaran, V, Elamathiyan, K, Rajamurugan, G, Praveenkumar, M, Saravana Kumar, S, Aathithya, V.S, “Experimental Evaluation on Friction Stir Processing of Al-6063 6063 with Addition of B4C And Sio2 Reinforcement”, International Journal of Applied Engineering Research, Vol. No.10, Issue No.32 Special Issue, Pages.23948-23951, 2015

Amirtharaj, D, Rajamurugan, G, Sivachidambaram, S, Dinesh, D, “Wear and Microstructural Characteristics of Friction Stir Processed Aluminium 6063”, International Journal of Applied Engineering Research, Vol. No.10, Issue No.62 Special Issue, Pages.216-220, 2015

Amirtharaj, D, Rajamurugan, G, Sivachidambaram, S, Dinesh, D, “Effect of Tool Geometry on Surface Modification of Aluminium 6063 by Friction Stir Processing”, ARPN Journal of Engineering and Applied Sciences, Vol. No.10, Issue No.12, Pages.5391-5394, 2015

Dinesh D, Sangaravadivel P, “Investigation of Inconel 718 on Electrical Discharge Machining Using Copper and Copper Alloy-Tungsten Disulfide Electrodes”, International Conference on “Trends in Automotive Parts Systems and Applications (TAPSA 2023)”, SAE India, 2023.

Dinesh D, IOT Based Universal Gas Detector and Health Monitoring Device”, International Conference on “Advances in Materials Research 2.0”, BIT, 2021.

Dinesh D, “Deep Learning”, International Conference on “ICETIS 2021”, JFP Publishers, South Africa, 2021.

D.Dinesh,P.Manoj Kumar, P.Kishore , “Wear analysis of AL5052 alloy with varying percentage of Tungsten carbide”, ICMMM 2019 , Bannari Amman Institute of technology, Sathyamangalam, March 2019.

D.Dinesh,A.Megalingam, A.Tajdeen, “Evaluation of Microstructure and Tribological Characterization of friction stir processed AL6063 /B4c SIO2 Composites”, ICMMM -2019, Bannari Amman Institute of technology, Sathyamangalam, March 2019.

P.Mathan Kumar, D.Dinesh, G.Sundarraju,S.Madeshwaran, “Modelling of Surface roughness in wire EDM Using Response surface Methodology Technique “, International Conference on Advances in Material Research , Bannari Amman Institute of technology, Sathyamangalam, March 2019.

A.Tajdeen, A.Megalingam,D.Dinesh, and Ajay chari, “Effect of Diffrent tools on drilling of AZ31 alloy using Taugchi techniques”, International Conference on Precision,meso,microand nano Engineering(copen2017), Indian institute of Technology, Chennai, December 2017,

N.Bhuvanesh ,D.Dinesh,R.Ganesh Kumar,and M.Gokul, “nvestigation on the effect of grit size of B4C particles over the mechanical properties of B4C DRMM6061 Al composite”, International Conference on Recent Innovations in Production Engineering, Anna University, Chennai, March 2017

G.Rajamurugan, S.Suresh,D.Dinesh, “Influence of process procedure and temperature distribution on Local post weld heat treatment of thick wall carbon steel pipe”, International Conference on Modern, Intelligent and Green Manufacturing, Erode Senguthar Engineering college , Erode, December 2015.

D.Dinesh, G.Rajamurugan,V.Baskaran et.al , “Experimental evaluation on friction stir processing of Al-6063 with addition of B4C and Sio2 Reinforcement “, International Conference on adaptive technologies for Sustainable Growth (ICATS2015), Paavai Engineering College, Nammakal, May 2015.

Manojkumar ,Dinesh.D, “Design and Analysis of heat fins on the electric motor for improving Heat dissipation”, OPTIMIZATION techniques in engineering sciences and Technologies (OPTEST 2014), Bannari Amman Institute of technology, Sathyamangalam, April 2014.

D.Dinesh ,Venkatasudhakar, “Experimental Testing and Analysis of bio based polymer matrix hybrid composites “, Advances and Challenges in mechanical engineering , Erode senguthar engineering college, Erode , April 2011.

D.Dinesh ,Venkatasudhakar, “Experimental testing and Analysis of bio based polymer matrix hybrid composites”, Recent innovation in Mechanical engineering(RIME 2011), Mahendra Engineering College, Namakkal, April 2011.

S.No.	Title	Investigator(s)	Funding Agency	Amount	Project Status	Sanction Date
1	ROBOTICS AND AUTOMATION IN INDUSTRY 4.0	SIVAKUMAR K, DINESH D	AICTE	AICTE		300000	Approved	09/27/2022

S.No.	Title	Date	Reg. No.	Status	Level	Funding Agency
1	PROCESS FOR MAKING GRAPHENE-TUNGSTEN OXIDE COMPOSITE NANOPOWDER FOR HIGH PERFORMANCE SUPERCAPACITOR AND ORGANIC GAS SENSOR	29.09.2023	202321061138	Filed	National	Self
2	SITTING CHAIR IN BATON STICK	03.02.2023	378910-001	Filed	National	Self
3	COVID 19 SAFETY KEY	16.06.2021	344795-001	Filed	National	Self
4	MECHANISM FOR BOREWELL PIPE ASSEMBLING AND DISMANTLING	31.05.2019	201941024373	Filed	National	Self
5	A METHOD OF FABRICATING PARTICLE REINFORCED METAL MATRIX SURFACE COMPOSITES	25.07.2019	201941030060	Filed	National	BIT
6	SMART FLY ASH CONVERTER	04.02.2020	202041004757	Filed	National	Self

S No.	Topic	Program	Venue	Date
1	Kinematics and Dynamics of Fluid Flow	Guest Lecture	Kumaraguru College of Technology	20.08.2024
2	Testing of Composite Materials as per the ASTM Standard	Practical Approach on Mechanical,Tribological,and Machining Behaviour of Metal Matrix Composites	Bannari Amman Institute of technolgy	17.02.2018

S.No.	Membership Number	Membership Body	Year	Duration
1	LO1623	INDIAN WELDING SOCIETY	2015	Life Time
2	M-1578337	The Institution of Engineers	2017	Life Time