Dr Prakash K B - Bannari Amman Institute of Technology

Experience Type	Organization	From	To	Total Experience
Engineering	Bannari Amman Institute of Technology, Sathyamangalam	16.08.2017
Engineering	Angel College Of Engineering and Technology	20.06.2012	12.08.2017	5 Year(s) & 1 Month

Degree	Specialization	Institute	University	Year of Passing
B.E.	MECH	PSG COLLEGE OF TECHNOLOGY	Anna University, Chennai	2009
M.E.	THERMAL ENGG	GOVERNMENT COLLEGE OF TECHNOLOGY	Anna University, Chennai	2012

Chandrasekaran M, Prakash K B, Subramaniyan C And Amarkarthik A “Energy Based Techno-Economic And Environmental Feasibility Study On Pv/T And Pv/T Heat Pump System With Phase Change Material—A Numerical Comparative Study”, Environmental Science And Pollution Research, Vol. No.31, Issue No.2024, Feb 2024

Prakash K B, Chandrasekaran M, Subramaniyan C And Manoj Kuamr P, “Assimilation Of A Novel Thermal Collector And Phase Change Material In Photovoltaic/Thermal System – An Energy And Exergy Based Comparative Study”, Journal Of Energy Storage, Vol. No.81, Issue No.C, Jan 2024

Subramaniyan C, Prakash K B And Arivazhagan Sampathkumar, “Solar-Air Source Heat Pump Water Heater For Scorching Climatic Condition: Energy, Exergy, Economic And Enviroeconomic (4e) Exploration For Sustainable Future”, Applied Thermal Engineering, Vol. No.240, Dec 2023

Subramaniyan C, Prakash K B And Arivazhagan Sampathkumar, “Optimal Utilisation Of Low-Grade Solar-Air Source For Heat Pump Water Heating Using A Dual-Source Evaporator With Forced Convection”, International Communications In Heat And Mass Transfer, Vol. No.150, Issue No.107174, Dec 2023

Subramaniyan C, Prakash K B, Arivazhagan Sampathkumar And Christopher Sathiya Satchi, “Feasibility Assessment Of A Stepped Solar Still Integrated With Hexagram In: An Experimental And Numerical Approach Toward Sustainability”, Environmental Science And Pollution Research, Nov 2023

Kumar, R.D., Prakash, K., Sundari, P.A., Sathya, S., “A Hybrid Machine Learning Model for Solar Power Forecasting”, E3S Web of Conferences, Vol. No.387, Issue No., pp.-, 2023

Prakash, K.B., Almeshaal, M., Pasupathi, M.K., Chinnasamy, S., Saravanakumar, S., Rajesh Ruban, S., “Hybrid PV/T Heat Pump System with PCM for Combined Heating, Cooling and Power Provision in Buildings”, Buildings, Vol. No.13, Issue No.5, pp.-, 2023

Prakash, K.B., Pasupathi, M.K., Chinnasamy, S., Saravanakumar, S., Palaniappan, M., Alasiri, A., Chandrasekaran, M., “Energy and Exergy Enhancement Study on PV Systems with Phase Change Material”, Sustainability (Switzerland), Vol. No.15, Issue No.4, pp.-, 2023

Prakash, K., Parimala, M., Garg, H., Riaz, M., “Lifetime prolongation of a wireless charging sensor network using a mobile robot via linear Diophantine fuzzy graph environment”, Complex and Intelligent Systems, Vol. No.8, Issue No.3, pp.2419-2434, 2022

Yaknesh, S., Tharwan, M., Saminathan, R., Rajamurugu, N., Prakash, K.B., Ankit, Pasupathi, M.K., Sarojwal, A., Gebreyohannes, D.T., “Mechanical and Microstructural Investigation on AZ91B Mg Alloys with Tool Tilt Variation by Friction Stir Welding”, Advances in Materials Science and Engineering, Vol. No.2022, Issue No., pp.-, 2022

Saravanakumar, S., Kalaiselvan, K., Ramesh, M., Prakash, K.B., Sundar Rajan, A., Subash Chandru, T., Aravinth, M.S., “Design and comparison of the strength of propeller shaft for truck made of AA2024, AA7068, and Ti-6Al-4V using ANSYS”, Materials Today: Proceedings, Vol. No.69, Issue No., pp.1442-1454, 2022

Saravanakumar, S., Kalaiselvan, K., Prakash, K.B., Parkunam, M., Niranjan, S., Dharanish, N., Akash, R., “Mechanical behaviour and microstructure analysis of aluminium 2024 and 5052 using friction stir welding”, Materials Today: Proceedings, Vol. No.69, Issue No., pp.1437-1441, 2022

Chandrasekaran, M., Prakash, K.B., Subramaniyan, C., Santhosh, N., Tamilarasan, V.D., “Experimental investigation on heavy duty engine radiator using cerium oxide nano fluid”, Materials Today: Proceedings, Vol. No.66, Issue No., pp.1497-1500, 2022

Parimala, M., Broumi, S., Prakash, K., Topal, S., “Bellman–Ford algorithm for solving shortest path problem of a network under picture fuzzy environment”, Complex and Intelligent Systems, Vol. No.7, Issue No.5, pp.2373-2381, 2021

Islam, F.R., Lallu, A., Mamun, K.A., Prakash, K., Roy, N.K., “Power Quality Improvement of Distribution Network Using BESS and Capacitor Bank”, Journal of Modern Power Systems and Clean Energy, Vol. No.9, Issue No.3, pp.625-632, 2021

Subramaniyan, C., Prakash, K.B., Kalidasan, B., Bhuvanesh, N., Amarkarthik, A., “Exergy Analysis on Performance of Groundnut Solar Dryer with Forced Convection”, IOP Conference Series: Materials Science and Engineering, Vol. No.1059, Issue No.1, pp.-, 2021

Prakash, K.B., Subramaniyan, C., Chandrasekaran, M., Kalidasan, B., Amarkarthik, A., Manoj Kumar, P., Saravanakumar, S., “Experimental analysis of the vapour compression refrigeration system with microchannel condenser using R134a and R1234yf refrigerant”, Journal of Engineering Research (Kuwait), Vol. No.9, Issue No., pp.-, 2021

Subramaniyan, C., Prakash, K.B., Amarkarthik, A., Kalidasan, B., Mohan Kumar, S., “Experimental and numerical evaluation on performance of potable water productivity with rectangular fins basin triangular solar still”, Journal of Engineering Research (Kuwait), Vol. No.9, Issue No., pp.-, 2021

Prakash, K.B., Fageehi, Y.A., Saminathan, R., Manoj Kumar, P., Saravanakumar, S., Subbiah, R., Arulmurugan, B., Rajkumar, S., “Influence of Fiber Volume and Fiber Length on Thermal and Flexural Properties of a Hybrid Natural Polymer Composite Prepared with Banana Stem, Pineapple Leaf, and S-Glass”, Advances in Materials Science and Engineering, Vol. No.2021, Issue No., pp.-, 2021

Prakash, K.B., Amarkarthik, A., Ravikumar, M., Manoj Kumar, P., Jegadheeswaran, S., “Optimizing Performance Characteristics of Blower for Combustion Process Using Taguchi Based Grey Relational Analysis”, Springer Proceedings in Materials, Vol. No.5, Issue No., pp.155-163, 2021

Prakash, K.B., Subramaniayan, C., Chandrasekaran, M., Manoj Kumar, P., Saravanakumar, S., “Development of mathematical model to study the effect of indoor air quality parameters and optimization using response surface methodology”, Materials Today: Proceedings, Vol. No.45, Issue No., pp.8195-8198, 2021

Kumar, P.M., Anandkumar, R., Mylsamy, K., Prakash, K.B., “Experimental investigation on thermal conductivity of nanoparticle dispersed paraffin (NDP)”, Materials Today: Proceedings, Vol. No.45, Issue No., pp.735-739, 2021

Subramaniyan, C., Kalidasan, B., Bhuvanesh, N., Prakash, K.B., Amarkarthik, A., “Second law analysis on performance of double stage reciprocating air compressor with inter cooler”, Materials Today: Proceedings, Vol. No.45, Issue No., pp.652-657, 2021

Saravanakumar, S., Gopalakrishnan, S., Kalaiselvan, K., Prakash, K.B., “Microstructure and mechanical properties of Cu/RHA composites fabricated by friction stir processing”, Materials Today: Proceedings, Vol. No.45, Issue No., pp.879-883, 2021

Subramaniyan, C., Prakash, K.B., Kalidasan, B., Amarkarthik, A., Kumaresan, G., “Uncertainty analysis on performance of double stage reciprocating air compressor with inter cooler”, Materials Today: Proceedings, Vol. No.45, Issue No., pp.1233-1236, 2021

Kumar, P.M., Mylsamy, K., Prakash, K.B., Nithish, M., Anandkumar, R., “Investigating thermal properties of Nanoparticle Dispersed Paraffin (NDP) as phase change material for thermal energy storage”, Materials Today: Proceedings, Vol. No.45, Issue No., pp.745-750, 2021

Manoj Kumar, P., Sudarvizhi, D., Prakash, K.B., Anupradeepa, A.M., Boomiha Raj, S., Shanmathi, S., Sumithra, K., Surya, S., “Investigating a single slope solar still with a nano-phase change material”, Materials Today: Proceedings, Vol. No.45, Issue No., pp.7922-7925, 2021

Chandrasekaran, M., Prakash, K.B., Prakash, S., Ravikumar, M., “Influence on performance and emission characteristics of diesel engine by introducing medium strength magnetic field in fuel and air lines”, IOP Conference Series: Materials Science and Engineering, Vol. No.764, Issue No.1, pp.-, 2020

Kumar, P.M., Saravanakumar, P.T., Mylsamy, K., Kishore, P., Prakash, K.B., “Study on thermal conductivity of the candle making wax (CMW) using nano – TiO2 particles for thermal energy storage applications”, AIP Conference Proceedings, Vol. No.2128, Issue No., pp.-, 2019

Kumar, P.M., Anandkumar, R., Sudarvizhi, D., Prakash, K.B., Mylsamy, K., “Experimental investigations on thermal management and performance improvement of solar PV panel using a phase change material”, AIP Conference Proceedings, Vol. No.2128, Issue No., pp.-, 2019

Prakash, K.B., Amarkarthik, A., Jegadheeswaran, S., Prakash, S., “Influence on performance and emission characteristics of diesel engine by blending n-butanol and n-pentanol as additives with diesel”, Journal of Green Engineering, Vol. No.9, Issue No.1, pp.60-75, 2019

Prakash, K., Islam, F.R., Mamun, K.A., Sharma, A., Sen, A., “Exergy Analysis of a Heating Ventilation and Air Conditioning (HVAC) System”, 2018 IEEE 7th International Conference on Power and Energy, PECon 2018, Vol. No., Issue No., pp.378-383, 2018

Prakash K B, “Experimental Analysis on Heat Pipe Based Solar Water Heater with Phase Change Materials”, Advancement in Multidisciplinary Research in Science, Engineering and Technology [AIMSET-2024]””, Sanskrithi School of Engineering, 2024.

Prakash K B, Dr Saravanakumar S, “Friction Stir Processing Impact on the Mechanical Characteristics and Heat Transmission of An AA5052 and AAS2024 FSP Welded Joint”, First International Conference on Advanced Trends in Renewable Energy 2022”, Nehru Institute of Technology, 2022.

Prakash K B, Dr Saravanakumar S, “Fabrication of Aluminium Matrix Composite Reinforced With Sodium Diboride using FSP”, First International Conference on “Advanced Trends in Renewable Energy 2022”, Nehru Institute of Technology, 2022.

Prakash K B, “Design and Development of Table Air Conditioner for Office and Gaming Applications Using Peltier Effect”, International Virtual Conference on “Science, Technology, Engineering and Management”, M Kumarasamy College of Engineering (Autonomous), Thalavapalayam, Karur, 2021.

Prakash K B, “Experimental Investigation on Waste Heat Recovery System By using Therminol 66”, International Virtual Conference on “Science, Technology, Engineering and Management”, M Kumarasamy College of Engineering (Autonomous), Thalavapalayam, Karur, 2021.

Prakash K B, “Development of PCM Interfaced Cooling / Heating Tents For Military Camp For Low Temperature Area Application”, International Virtual Conference on “Science, Technology, Engineering and Management”, M Kumarasamy College of Engineering (Autonomous) Thalavapalayam, Karur, 2021.

Prakash K B, “Experimental Investigation on Waste Heat Power Harvesting using Hybrid Thermoelectric Generator”, International Conference on “ICWEE2021″, Sathyabama Institute of Science and Technology, 2021.

Prakash K B, “Energy and Exergy Analysis on the Vapour Compression Refrigeration System With Organic PCM At Condenser Side”, International Conference on “ICAMR”, BIT, 2021.

K B Prakash, “Experimental Investigation on Thermal Conductivity of Nanoparticle Dispersed Paraffin (NDP)”, ICAMR 2019, Bannari Amman Institute of Technology, BIT SATHY, December 2019.

K B Prakash, “Investigating Thermal Properties of Nano-particle Dispersed Paraffin (NDP) as Phase Change Material for Thermal Energy Storage”, ICAMR 2019, Bannari Amman Institute of Technology, Sathyamangalam, BIT SATHY, December 2019.

K B Prakash, “Microstructure and Mechanical Properties of Cu/RAH Composites Fabricated by Friction Stir Processing”, ICAMR 2019, Bannari Amman Institute of Technology, Sathyamangalam, December 2019.

S Vidhyashagar , R Naveen , M Nithin and K B Prakash , , “Experimental Analysis on Chemical Dehumidification of Air with Silica Gel “, National Conference on Recent Trends in Chemistry of Materials , Bannari Amman Institute of Technology, Sathyamangalam, October 2019.

M Suryaprakash , K R Sujit , N Sriram and K B Prakash, “Experimental Analysis on Chemical Dehumidification of Air with Calcium Chloride Solution “, National Conference on Recent Trends in Chemistry of Materials – 2019, Bannari Amman Institute of Technology, Sathyamangalam, October 2019.

M Channdrasekaran , K B Prakash, M. Ravikumar, S Prakash, “Influence on Performance and Emission Characteristics of Diesel Engine by Introducing Medium Strength Magnetic Field in Fuel and Air Lines”, ICAMPC 2019, Bannari Amman Institute of Technology, Sathyamangalam, September 2019.

Prakash K B, “Design and fabrication of bore well child rescuing machine”, NCRTET 2019, Rathinam Technical Campus, Coimbatore, March 2019.

Prakash K B, “Design and fabrication of chainless driving two wheeler using propeller shaft.”, NCRTET 2019, Rathinam Technical Campus, Coimbatore, March 2019.

Prakash K B, “Study on Thermal Conductivity of the Candle Making Wax (CMW) using Nano – TiO2 particles for Thermal Energy Storage Applications”, ICMMM2019, Bannari Amman Institute of Technology, Sathyamanagalm, Erode, March 2019.

Prakash K B, “Experimental Investigations on Thermal Management and Performance Improvement of Solar PV Panel using a Phase Change Material”, ICMMM2019, Bannari Amman Institute of Technology, Sathyamanagalm, March 2019.

Manojkumar P, Mylsamy K, Prakash K B, “Performance Analysis of Evacuated Tube Solar Water Heater Using Diffuse Reflectors”, NCEEE-2018, Bannari Amman Institute of Technology, Sathyamangalam, August 2018.

Prakash K B, “Effects blending biodiesel produced from coconut oil on Performance and Emission characteristics of Diesel engine “, ICAAA-2018, Dhanalakshmi Srinivasan College of Engineering and Technology, Chennai, March 2018.

Prakash K B, “Preparation and characterization of nano enhanced phase change material for solar thermal heating application”, National Conference on recent trends in engineering and technology,, Rathinam Institute of Technology, Coimbatore, March 2018.

Prakash K B, “”Effects of Performance and Emission Characteristics of Four Stroke Diesel Engine by Blending Biodiesel Produced from Cocunut oil””, IEEE Sponsored International Conference on Recent Advances in Engineering and Technology, Srikrishna College of Engineering and Technology, Coimbatore, December 2017.

Prakash K B, “Investigation on Underwater Friction Stir Welding of Aluminium 6061 and AZ31”, International Conference on Science, Technology and Engineering, IET Engineers, Bangalore, November 2017.

Saravanakumar S, Prakash K B, , “Production of copper matrix composite reinforced with Aluminium Nitrate using Friction Stir Processing Techniques”, ICAREM 2016, Professional Group of Institutions, Tirupur, March 2016.

Prakash K B, “Investigation and improvement of mechanical properties in Aluminium hybrid composites”, ICAREM 2016, Professional Group of Institutions, Tirupur, March 2016.

Prakash K B, “Optimization of blower performance in combustion process using Taguchi based Grey Relational Analysis”, ICAMM â?? 2015, CAPE Institute of Technology, Tirunelveli, March 2015.

Prakash K B, , “Optimization of IAQ in conditioned space using response surface methodology”, LTIME-12, Info institute of Engineering, Coimbatore, March 2012.

S.No.	Title	Investigator(s)	Funding Agency	Amount	Project Status	Sanction Date
1	"Design and development of solar cogeneration plant for steam dryer, electricity generation, cooling system and effluent heat treatment for textile industry."	Dr.M.Ravikumar	Technology Missions Division	8792000

S.No.	Title	Date	Reg. No.	Status	Level	Funding Agency
1	MULTILAYER GREYWATER FILTER	27.11..2023	202341080577	Filed	National	Self
2	DESIGN OF SMALL SCALE WIND TURBINE	28.11..2023	202341080593	Filed	National	Self
3	SOLAR PORTABLE CHARGER	08.03.2023	202341015448	Filed	National	Self
4	DOMESTIC WATER TANK WITH NOVEL CLEANING SYSTEM	17.02.2023	202341010804	Filed	National	Self
5	AUTOMATIC WORSHIP MACHINE	17.02.2023	202341010799	Filed	National	Self
6	SOLAR AIR PURIFIER	16.02.2023	202341010403	Filed	National	Self
7	REFRIGERANT LEAK DETECTOR	14.11.2022	202241065018	Filed	National	Self
8	NUT ROASTER WITH PARABOLIC CURVED PAN HEATING SYSTEM	11.11.2022	202241064441	Filed	National	Self
9	ELECTRIFIED CHIMNEY	27.10.2022	202241061163	Filed	National	Self
10	LASER PEN	29.09.2022	202241055851	Filed	National	Self
11	SOLAR PANEL CLEANING BOT	03.10.2022	202241056698	Filed	National	Self
12	AN EFFICIENT HYBRID HEAT PUMP SOLAR DRYER WITH THERMAL ENERGY STORAGE	29.09.2022	202241055850	Filed	National	Self
13	MULTIPURPOSE WATER BOTTLE	13.04.2022	202241022071	Filed	National	Self
14	EVACUATED SOLAR COOKING VESSEL WITH HEXAGRAM FINS	01.04.2022	202241019889	Filed	National	Self
15	COMPACT PORTABLE ROOM HEATER	20.12.2021	202141059402	Filed	National	Self
16	FOOD INGREDIENTS PRESERVATION PROCESS USING ANTIOXIDANTS	06.09.2021	202141040685	Filed	National	Self
17	SPRING LOADED THIN POWER GENERATION RIBBON FROM NATURAL MOVEMENTS	30.08.2021	202141039196	Filed	National	Self
18	COMPACT PERSONALIZED AIR CONDITIONER FOR DOUBLE COT WITH LOW POWER CONSUMPTION	24.11.2021	202141054160	Filed	National	Self
19	MILK CAN COOLER	29.11.2021	202141055161	Filed	National	Self
20	DESIGN OF EVACUATED BUCKET WITH SIDE CUTTING PROFILE TOOTH FOR EASY INITIATION OF CRACK OF SOIL	16.11.2021	202141052454	Filed	National	Self
21	IOT BASED MOBILITY VEHICLE GROCERY STORE	15.11.2021	202141052278	Filed	National	Self

S.No.	Subject Area
1	Refrigeration and Air-conditioning
2	IC engine
3	Heat exchanger
4	Thermal system