Prof. Raghunath M - Bannari Amman Institute of Technology

Experience Type	Organization	From	To	Total Experience
Engineering	Bannari Amman Institute of Technology, Sathyamangalam	05.05.2017
Engineering	K.S.RANGASAMY COLLEGE OF TECHNOLOGY	12.06.2015	02.05.2017	1 Year & 10 Month(s)

Degree	Specialization	Institute	University	Year of Passing
B.E	Electrical and Electronics Engineering	Surya Engineering College	Anna University, Chennai	2012
M.E	Mechatronics	Kongu Engineering College Perundurai	Anna University, Chennai	2015

S.No.	Subject Area
1	Industrial Automation
2	Micro Electro Mechanical systems
3	Sensors and Instrumentation

Ashokkumar N, Haritha Pothala, Eswar Parimi, Kumar P, Prakash S, Raghunath M. (2024). “IOT-Enabled VLC Industry Automation System: Harnessing Node MCU Microcontroller for Streamlined Control and Communication”. 1-6. 10.1109/ISCS61804.2024.10581065.

Raghunath M, Nagarajan P, Senthil Kumar K L, Dhinesh S K, Tharakeshvar P A Prasanna A and Kavinkanth A,”Automated Storage and Retrieval System for Agricultural Warehouse Management”

Siddharthan B, Dhinesh S K, Nagarajan P, Raghunath M, Sundar S and Prasanna A,”Design and Fabrication of an Automated Paper-Cutting Machine for Re-Using Waste Papers”

S. K. Dhinesh, P. Nagarajan, M. Raghunath, S. Sundar, N. Dhanushree and S. Pugazharasu, “Ai Based Weed Locating and Deweeding Using Agri-Bot,” 2023 Third International Conference on Smart Technologies, Communication and Robotics (STCR), Sathyamangalam, India, 2023, Pages. 1-6, Doi: 10.1109/STCR59085.2023.10397025.

S.K. Dhinesh, J. Joshua Robert, S. Tushar Nair, D.H. Sharne Moni, S. Sona Fowzeya, K.L. Senthil Kumar, M. Raghunath and P. Nagarajan, “Recent Trends in Additive Manufacturing of Electronics Devices”, Volume 66, Part 3, 2022, Pages 928-941, Https://Doi.Org/10.1016/J.Matpr.2022.04.654.

Nijandhan, K, Raghunath, M, Kanna, B.M, Nithish, P, Vishnu Prakash, G, Logesh, E, “Optimization of Mechanical Behaviors of Boiled Egg Shell Particulate-Banana Fiber Reinforced Polyester Composites”, Springer Proceedings in Materials, Vol. No.5, Pages.107-114, 2021

Raghunah, M, Nijandhan, K, Dhanasekar, R, Sukesh, P, Nishanth, A, Megantha, P, “Particle Swarm Optimization of Tensile Strength on Treated Bermuda Grass Fiber as Reinforcement in Polyester Composites”, IOP Conference Series: Materials Science and Engineering, Vol. No.995, Issue No.1, 2020

Dhanasekar R, Kalaiyarasi M, Arunjayakar S, Raghunath M and Raghavendra Prabhu S, “Control and Stabilization of Pitch Axis Angle in 3 Dof Titltrotor”, Published Under Licence By IOP Publishing Ltd, IOP Conference Series: Materials Science and Engineering, Volume 995, International Conference on Mechatronics in Energy and Environment Protection (Icmeep 2020), 16-17 October 2020, Erode, India, Citation R. Dhanasekar Et Al 2020 IOP Conf. Ser.: Mater. Sci. Eng. 995 012023, Doi 10.1088/1757-899x/995/1/012023.

Arulmurugan, L, Raghavendra Prabhu, S, Ilangkumaran, M, Suresh, V, Saravanakumar, R, Raghunath, M, “Kinematics and Plane Decomposition Algorithm for Non Linear Path Planning Navigation and Tracking of Unmanned Aerial Vehicles”, IOP Conference Series: Materials Science and Engineering, Vol. No.995, Issue No.1, 2020

Karrthik, R.S, Baskaran, S, Raghunath, M, “Development of Intelligent Model to Predict the Characteristics of Biodiesel Operated Ci Engine With Hydrogen Injection”, Advances in Computational Design, Vol. No.4, Issue No.4, Pages.367-379, 2019

Raghunath M, Nagarajan P, Dhinesh S K, “AI Based Weed Locating and Deweeding Agri-Bot”, Third International Conference on “Smart Technologies, Communication and Robotics (STCR)”, BIT, 2023.

Raghunath M, Senthil Kumar K L, Dhinesh S K, Nagarajan P, Madheswaran S, “A Review on Development of 3D Printed FDM Based Electro Mechanical Sensor”, Second International Conference on Mechatronics in Energy and Environment Protection- ICMEEP 2021”, BIT, 2021.

Dhinesh S K, Senthil Kumar K L, Prasad K S, Gokulraj A P, Raghunath M, Madheswaran S, Saravanan M., “Design and Fabrication of Arduino Controlled CNC Foam Cutting Machine”, Second International Conference on New Age Systems and Automation Technologies – ICNAAT-2021, ECE Department – ICNAAT-2021, Erode, July 2021.

Raghunath M,Nijandhan, “Design and Fabrication of Automatic Fuse Insertion Machine”, ICSAIOT, KSRCT, August 2019.

Jaiprathap G V, Mukundhan K, Srisaran Venkatachalam, Raghunath M, Raghavendra Prabhu S, “Design and Simulation of microaccelerometer”, INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS (ICAM), Centre for Nanoscience and Nanotechnology, Jamia Millia Islamia (A Central University), New Delhi, March 2019.

Karrthik R S, Raghunath M, Hariharan A, Jaiprathap G V, “Design and Development of Intelligent Model to Predict the Characteristics of Biodiesel Operated CI Engine with Hydrogen Injection”, International conference on Advances in Mechanical Engineering, SRM University,Chennai, March 2018.

Karrthik R S, Raghunath M, “Design and fabrication of two wheeler mudguard using sisal natural fiber composite”, International Conference on Advances in Materials Science and Technology, VIT University, Vellore, October 2017.

Raghunath M,Karrthik R S,Jaiprathap, “Prospective of titanium alloy in 3d printing for Bio-Medical Application”, Additive manufacturing (3D printing) in Bio-Medical Apllication, K S Rangasamy College of Technology,Tiruchengode., August 2017.

K.Gomathi, A.SenthilKumar,M.Raghunath, “Design And Analysis Of Micro accelerometer For Tool Condition Monitoring”, International Conference on Applied Machanics and materials, SSN, Chennai, April 2015.

T. Mohanraj , S. Arunkumar , M. Raghunath , M. Anand, “Mobile Robot Path planning Using Ant Colony Optimization”, National Conference in Mechanical,Environment,Safety and Health Engineering, KIOT, May 2014.

S.No.	Title	Investigator(s)	Funding Agency	Amount	Project Status
1	Applications of 3D printing in Tissue Engineering	Dr.K.L.Senthikumar	Indian council for medical Research	1,15,000	Under Review
2	Advancements of Additive layer manufacturing in Defence	Dr.K.L.Senthikumar	Defence Research and Development Organisation	83,000	under review
3	4D Printing : concept, implementation and challenges	Dr.K.L.Senthilkumar	council of science and industrial research	1,27,000	Under Review
4	Mechatronics in Medical and Health Care Applications	Dr.K.L Senthil Kumar	Department of Health Research - Indian Council for Medical Research	5,12,000	Under Review
5	Smart city : concept, implementation and challenges	Dr.K.L. Senthilkumar	council of science and industrial research	1,25,000	Sent
6	Potential of Smart Additive Manufacturing (4D Printing) in health Care system	Dr.K.L.Senthilkumar	DST- SERB	1,36,000	Under Consideration

S.No.	Title	Date	Reg. No.	Status	Level	Funding Agency
1	PAROTTA SMASHING MACHINE 1	25.03.2024	202441023324	Filed	National	Self
2	EXTENDABLE PAPAYA FRUIT PICKER WITH CONTAINER	30.03.2023	202341023774	Filed	National	Self
3	TRIMMER HAIR COLLECTOR	07.10.2022	202141015569	Published	National	Self
4	EXTENDABLE SAPODILLA FRUIT PICKER WITH STORAGE BAG	07.10.2022	202141014249	Published	National	Self
5	DUSTER WITH INTEGRATED WATER CARTRIDGE	07.10.2022	202141014251	Published	National	Self
6	3D PRINTING REUSABLE SPOOL WHEEL WITH Self LOCKING MECHANISM	07.10.2022	202141015565	Published	National	Self
7	SPLIT COMB	07.10.2022	202141014250	Published	National	Self
8	INTEGRATED COMBINATIONAL LOCK FOR TROLLEY BAGS	23.09.2022	202141011274	Published	National	Self
9	MULTI-BULB CHANGER KIT	16.09.2022	202141010220	Published	National	Self
10	DESIGN AND FABRICATION OF RICE SERVING SPOON CLEANER	26.08.2022	202141007318	Published	National	Self
11	RICE STAINER	29.08.2022	202241049161	Filed	National	Self
12	PAD TO PREVENT THE PLANTAIN TREES FROM BREAKING	29.08.2022	202241049159	Filed	National	Self
13	ACTION HELMET CAMERA MOUNT	05.05.2022	202241026128	Filed	National	Self
14	PORTABLE MACHINE FOR GAS BURNER CLEANING	24.01.2022	202241003785	Filed	National	Self
15	NAIL CUTTER WITH NAIL COLLECTOR	17.03.2021	202141011275	Published	National	Self
16	A DEVICE TO ARREST TAP WATER LEAKAGE	09.08.2021	202141035801	Filed	National	Self
17	SMALL ONION PEELER	20.09.2021	202141042458	Filed	National	Self
18	DESIGN OF MICROBOLOMETER WITH CAPACITIVE TRANSDUCER	16.10.2019	201941041843	Filed	National
18	DESIGN AND FABRICATION OF RICE SERVING SPOON CLEANER	22.02.2021	202141007318	Filed	National	Self
19	MULTI-BULB CHANGER KIT	11.03.2021	202141010220	Filed	National	Self
20	NAIL CUTTER WITH NAIL COLLECTOR	17.03.2021	202141011275	Filed	National	Self
21	INTEGRATED COMBINATIONAL LOCK FOR TROLLEY BAGS	17.03.2021	202141011274	Filed	National	Self
22	DUSTER WITH INTEGRATED WATER CARTRIDGE	30.03.2021	202141014251	Filed	National	Self
23	EXTENDABLE SAPODILLA FRUIT PICKER WITH STORAGE BAG	30.03.2021	202141014249	Filed	National	Self
24	HELMET WITH INBUILT AUTOMATIC LOCKING SYSTEM	30.03.2021	202141014252	Filed	National	Self
25	SPLIT COMB	30.03.2021	202141014250	Filed	National	Self
26	TRIMMER-HAIR COLLECTOR	01.04.2021	202141015569	Filed	National	Self
27	3D PRINTING REUSABLE SPOOL WHEEL WITH Self-LOCKING MECHANISM	01.04.2021	202141015565	Filed	National	Self
28	HUMAN EFFORT REDUCTION ATTACHMENT FOR CUTTING PLIER	22.04.2021	202141018552	Filed	National	Self
29	MULTI-FUNCTIONAL TOOL FOR THE EXTRUDER UNIT OF A 3D PRINTER	07.06.2021	202141025200	Filed	National	Self