Prof. Ramakrishnan A - Bannari Amman Institute of Technology

Smart India Hackathon 2025, 08th to 12th December 2025

Admission Enquiry 2026-2027 Information Brochure 2026-2027 For Admission Contact - 04295 226000 | +91 89401 26000

Experience Type	Organization	From	To	Total Experience
Engineering	Bannari Amman Institute of Technology, Sathyamangalam	13.06.2013

Degree	Specialization	Institute	University	Year of Passing
B.Tech	Mechanical	Kalasalingam University	Kalasalingam University Krishnankoil	2011
M.E	ENGG DESIGN	Bannari Amman Institue Of Technology	Anna University, Chennai	2013

S.No.	Subject Area
1	Welding Technology

Ramakrishnan A, Rameshkumar Thirupathi, ” Effect of welding parameters on mechanical and microstructural properties of cold metal transfer-welded thin sheet AISI 301LN stainless steel”, “Materials and Technology”, Volume No.59, Issue No.2, Pages . 243-251, https://doi.org/10.17222/mit.2024.1332, 2025.

Radha Krishnan, B, Theerkka Tharisanan, R, Arumuga Prabu, V, Immanuel, P, Ramakrishnan, A, “Experimental Investigation of Mechanical Properties of Al7075-Al2O3-B4C Composite Via Stir Route”, Materials Today: Proceedings, Vol. No.64, Pages.1721-1724, 2022

Sundar Raju, G, Sivakumar, K, Ramakrishnan, A, Selvamuthukumaran, D, Sakthivel Murugan, E, “Design and Fabrication of Sanitizer Sprinkler Robot for Covid-19 Hospitals”, IOP Conference Series: Materials Science and Engineering, Vol. No.1059, Issue No.1, 2021

Tamilarasan, V.D, Rameshkumar, T, Saravanan, S, Ramakrishnan, A, “Experimental Analysis of Forced Turbulent Convective Heat Transfer in a Circular Cross-Sectional Tube With Al2O3-Water Nanofluid”, Springer Proceedings in Materials, Vol. No.5, Pages.1245-1257, 2021

Ramakrishnan, A, Ramesh Kumar, T, Rajamurugan, G, Tamilarasan, V.D, Vijayakumar, M, “Experimental Investigation on Mechanical Properties of TIG Welded Dissimilar AISI 304L and AISI 316L Stainless Steel”, Springer Proceedings in Materials, Vol. No.5, Pages.801-807, 2021

Ramakrishnan, A, Radha Krishnan, B, “Prediction of Surface Roughness in CNC Turning Process Using Adaptive Neural Fuzzy Inference System”, Journal of Engineering Research (Kuwait), Vol. No.9, 2021

Ramakrishnan, A, Rameshkumar, T, Rajamurugan, G, Sundarraju, G, Selvamuthukumaran, D, “Experimental Investigation on Mechanical Properties of TIG Welded Dissimilar AISI 304 and AISI 316 Stainless Steel Using 308 Filler Rod”, Materials Today: Proceedings, Vol. No.45, Pages.8207-8211, 2021

Sasikumar, C, Sundaresan, R, Medona, C.M, Ramakrishnan, A, “Corrosion Study on AA-TIG Welding of Duplex Stainless Steel”, Materials Today: Proceedings, Vol. No.45, Pages.3383-3385, 2021

Sasikumar, C, Kanna, P.G, Sundaresan, R, Ramakrishnan, A, “Experimental Analysis of Al-AlN-B4C Hybrid Composite Material for Automobile Disk Brake”, Materials Today: Proceedings, Vol. No.45, Pages.3674-3677, 2021

Ramesh Kumar, T, Guruprakash, T, Nandha Kumar, P, Gokul, R, Ramakrishnan, A, “Study on Fibre Behaviour for Chemical Treatment and Fabrication of ABS-Based Fibre Composite”, Lecture Notes in Mechanical Engineering, Pages.103-120, 2021

Ravichandran, S, Vengatesan, E, Ramakrishnan, A, “Synthesis and Dynamic Mechanical Analysis of Fiber Reinforced Low-Density Polyethylene Hybrid Polymer Composites”, Materials Today: Proceedings, Vol. No.27, Pages.177-180, 2020

Ramakrishnan, A, Rajamurugan, G, Krishnasamy, P, “Emission and Tribological Studies on Nano CuO/Jatropha Methyl Ester/Synthetic Mineral Oil in a Two-Stroke Engine”, SAE Technical Papers, Vol. No.2019, 2019

Rajamurugan, G, Deepankumar, S, Ramakrishnan, A, Krishnasamy, P, Dhanabalan, D, “Corrosion Characteristics on Friction Stir Welding of Dissimilar AA2014/AA6061 Alloy for Automobile Application”, SAE Technical Papers, Vol. No.2019, 2019

Sakthivelmurugan, E, Senthilkumar, G, Ramakrishnan, A, Selvamuthukumaran, D, “Analysis of Searching Task Using Chain Method in Swarm Robotics”, International Journal of Recent Technology and Engineering, Vol. No.7, Issue No.4, Pages.66-70, 2019

Rajamurugan, G, Dinesh, D, Ramakrishnan, A, “A Comparative Study on Grain Size and HAZ Width of GMA and PGMA Welds of Dissimilar Ass and HSLA Steel Plates”, International Journal of Mechanical and Production Engineering Research and Development, Vol. No.8, Issue No.Special Issue 7, Pages.1641-1649, 2018

Rajesh Kanna, P, Anbumalar, V, Krishnakumar, M, Ramakrishnan, A, Allwyn Pushparaj, S, Santhosh Kumar, A.V, “Numerical Investigation of Mixed Convection Heat Transfer from Block Mounted on a Cavity”, Arabian Journal for Science and Engineering, Vol. No.39, Issue No.12, Pages.9187-9204, 2014

A Ramakrishnan, T Ramesh Kumar, G Rajamurugan and V D Tamilarasan, “Experimental Investigations on Mechanical Properties of TIG Welded Dissimilar AISI 304L and AISI 316L Stainless Steel”, International Conference on Advanced Materials and Research 2019 (ICAMR-2019), Department of Mechanical Engineering, BIT, Sathyamangalam, December 2019.

V D Tamilarasan, T Ramesh Kumar, S Saravanan and A Ramakrishnan, “Experimental Analysis of Forced Turbulent Connective Heat Transfer in a Circular Tube with Al2O3 Water Nanofluid”, International Conference on Advanced Materials and Research (ICAMR-2019), Department of Mechanical Engineering, BIT, Sathyamangalam, December 2019.

A Ramakrishnan and T Ramesh Kumar, “A Study on Mechanical Properties of TIG Welded Dissimilar Metals”, International Conference on Advances in Materials Processing and Characterization (ICAMPC-2019), Departments of MTRS, MECH, Auto, BIT, Sathyamangalam, September 2019.

A.Ramakrishnan , “EFFECT OF PULSED TIG PARAMETERS IN SURFACE MODIFICATION OF AISI 1018”, National Conference on Advances in Technology and Science 15, Bannari Amman Institute of Technology, April 2015.

A.Ramakrishnan , “Application of taguchi design method to study wear behavior of sintered and hardened AISI 4140 powder metallurgy steel”, OPTEST 2014, Bannari Amman Institute of Technology , April 2014.

A.Ramakrishnan, “Investigation of tribological studies of jatropha methyl ester with nano cuo additives blended with two stroke engine oil”, International conference on recent Innovation in Engineering, Sri Subramanya Collage , Palani, March 2014.

A.Ramakrishnan , “Experimental emission and tribological studies of jatropha methyl ester with nano cuo additives blended with two stroke engine oil”, OPTEST 2013, Bannari Amman Institute of Technology, April 2013.

A.Ramakrishnan, “Wear studies on metal matrix composite using taguchi technique”, OPTEST 2012, Bannari Amman Institute of Technology, April 2012.

A.Ramakrishnan, “Numerical investigation of cavity fitted channel flow”, 37 National and Fourth International Conference on FMFP, 2012

S.No.	Title	Date	Reg. No.	Status	Level	Funding Agency
1	Three Jaw Gripper	21.05.2024	417577-001	Filed	National	Self
2	DESIGN AND FABRICATION OF PORTABLE SUGARCANE BUD CHIPPER	26.12.2022	202241075474	Filed	National	Self
3	DEVICE FOR UNDERWATER INSPECTION AND RESCUE	27.12.2021	353960-001	Filed	National	Self

S.No.	Topic	Program	Venue	Date
1	static and dynamic analysis	guest lecture	sns collage of technology , coimbatore	03.04.2019
2	Computational fluid Dynamics	workshop	Sree Narayanaguru collage of Engineering, Erunakulum,kerela	06.07.2015