Dr Ramesh Kumar T - Bannari Amman Institute of Technology

Experience Type	Organization	From	To	Total Experience
Engineering	Bannari Amman Institute of Technology, Sathyamangalam	11.08.2006
Engineering	ADHIYAMAAN ENGINEERING COLLEGE	06.10.2003	09.08.2006	2 Year(s) & 10 Month(s)
Engineering	MAHARAJA ENGINEERING COLLEGE	05.06.2002	24.09.2003	1 Year & 3 Month(s)

Degree	Specialization	Institute	University	Year of Passing
B.E	Mechanical	Maharaja Engineering College	Bharathiar University, Coimbatore	2000
M.E	Engineering Design	Kongu Engineering College	Bharathiar University, Coimbatore	2001
Ph.D	Mechanical	Dr.Mahalingam College of Engineering and Technology	Anna University, Chennai	2014

Ramesh Kumar T, “Innovative Design Of Earth Auguring Field Mobile Robot For Productive Farming”, Journal Of Current Research Engineering And Science, Jan 2024

Pradeep, A.D., Vivekanandhan, R., Rameshkumar, T., Sangaravadivel, P., “Design of Hvac System for Beverage Industry”, IOP Conference Series: Materials Science and Engineering, Vol. No.1059, Issue No.1, pp.-, 2021

Tamilarasan, V.D., Rameshkumar, T., Saravanan, S., Ramakrishnan, A., “Experimental Analysis of Forced Turbulent Convective Heat Transfer in a Circular Cross-Sectional Tube With Al2O3-Water Nanofluid”, Springer Proceedings in Materials, Vol. No.5, Issue No., pp.1245-1257, 2021

Ramakrishnan, A., Rameshkumar, T., Rajamurugan, G., Sundarraju, G., Selvamuthukumaran, D., “Experimental investigation on mechanical properties of TIG welded dissimilar AISI 304 and AISI 316 stainless steel using 308 filler rod”, Materials Today: Proceedings, Vol. No.45, Issue No., pp.8207-8211, 2021

Pradeep, A.D., Rameshkumar, T., Kumar, M., “Parameter optimization of SLS Sinterstation 2500plususing GRA for better surface finish and dimensional accuracy”, Materials Today: Proceedings, Vol. No.45, Issue No., pp.8105-8109, 2021

Tamilarasan, V.D., Rameshkumar, T., Rajiev, R., Saravanan, S., Chandrasekaran, M., “A review on existing single cylinder 4 stroke petrol engine design analysis”, Materials Today: Proceedings, Vol. No.45, Issue No., pp.8064-8069, 2021

Pradeep, A.D., Rameshkumar, T., “Review on centrifugal casting of functionally graded materials”, Materials Today: Proceedings, Vol. No.45, Issue No., pp.729-734, 2021

Baskaran, S., Venkatasamy, R., Venkatesa Prabu, D., Ramesh Kumar, T., Meenakshi Priya, B., “An Extensive Review on Befitting Batteries and Drives for Electric Vehicles”, Lecture Notes in Mechanical Engineering, Vol. No., Issue No., pp.851-865, 2021

Ramesh Kumar, T., Guruprakash, T., Nandha Kumar, P., Gokul, R., Ramakrishnan, A., “Study on Fibre Behaviour for Chemical Treatment and Fabrication of ABS-Based Fibre Composite”, Lecture Notes in Mechanical Engineering, Vol. No., Issue No., pp.103-120, 2021

Tamilarasan, V.D., Ramesh Kumar, T., “Fuel Injection Pressure and Combustion Chamber Geometry Effects on the Performance and Emission Characteristics of Diesel Fueled CI Engine with EGR”, Lecture Notes in Mechanical Engineering, Vol. No., Issue No., pp.457-477, 2021

Yuvaraj, D., Rameshkumar, T., “CFD analysis of flow and thermal behaviour of ci engine”, International Journal of Mechanical and Production Engineering Research and Development, Vol. No.9, Issue No., pp.299-308, 2019

Senthil Kumar, K.L., Ramesh Kumar, T., “An Integrated Approach to Optimize Parameters in Electrochemical Machining Process”, International Journal of Applied Engineering Research, Vol. No.10, Issue No.3, pp.8297-8306, 2015

Rameshkumar, T., Rajendran, I., “Mechanical and tribological properties on Al-Sn-Si alloy-based plain bearing material”, Tribology Transactions, Vol. No.56, Issue No.2, pp.268-274, 2013

Rameshkumar, T., Rajendran, I., Latha, A.D., “Investigation on the mechanical and tribological properties of aluminium-tin based plain bearing material”, Tribology in Industry, Vol. No.32, Issue No.2, pp.3-10, 2010

Ramesh Kumar T, “Innovative Design of Earth Auguring Field Mobile Robot for Productive Farming”, 11th international conference on “Contemporary Engineering and Technology 2023”, Prince Shree Venkateswara Padmavathi Engeieering College, 2023.

Ramesh Kumar T, “Investigationg the Mechanical Properties of National Fiber Based Hybrid Composites for Automotive Implemetations: An Overview”, National Conference on “Futuristic Materials in Science and Technology (NCFMST-2023)”, BIT, 2023.

Ramesh Kumar T, “Design and Analysis of Connecting Rod in Automobile Application”, Second International Conference on “Emerging Trends in Materials, Computing and Communication Technologies (ICETMCCT 2021)”, Annai Vailankanni College of Engineering, 2021.

Ramesh Kumar T, “Power Generation rom Tread Mill to Charge Mobile Phones”, Second International Conference on “Emerging Trends in Materials, Computing and Communication Technologies (ICETMCCT 2021)”, Annai Vailankanni College of Engineering, 2021.

T Ramesh Kumar, D Yuvaraj and T Guruprakash, “Comprehensive Review on Tribological and Mechanical Behaviour of Al MMCs”, ICMDMSE 2019, Department of Mechanical Engineering, Coimbatore, March 2020.

T Ramesh Kumar, T Guruprakash, P Nandhakumar and R Gokul, “Study on Fibre Behaviour of Chemical Treatment and Fabrication of ABS Based Fibre Composite”, ICMDMSE 2020, Department of Mechanical Engineering, Coimbatore, March 2020.

Pradeep A D and Rameshkumar T, “Review on Centrifugally Cast Functionally Graded Materials”, International Conference on Advances in Materials Research (ICAMR-2019), Department of Mechanical Engineering, BIT, Sathyamangalam, December 2019.

S Deepankumar, B Saravanan, D Yuvaraj, T Ramesh Kumar, M Sureshkumar, K Vinoth Simmon, “Simulation and Analysis with Material Optimization of Automobile Suspension using Multi-Body Dynamics”, ICAMR-2019, Department of Mechanical Engineering, BIT, Sathyamangalam, December 2019.

A Ramakrishnan, T Ramesh Kumar, G Rajamurugan and V D Tamilarasan, “Experimental Investigations on Mechanical Properties of TIG Welded Dissimilar AISI 304L and AISI 316L Stainless Steel”, International Conference on Advanced Materials and Research 2019 (ICAMR-2019), Department of Mechanical Engineering, BIT, Sathyamangalam, December 2019.

V D Tamilarasan, T Ramesh Kumar, S Saravanan and A Ramakrishnan, “Experimental Analysis of Forced Turbulent Connective Heat Transfer in a Circular Tube with Al2O3 Water Nanofluid”, International Conference on Advanced Materials and Research (ICAMR-2019), Department of Mechanical Engineering, BIT, Sathyamangalam, December 2019.

V D Tamilarasan and T Ramesh Kumar, “Fuel Injection Pressure and Combustion Chamber Geometry Effects on the Performance and Emission Characteristics of Diesel Fuelled CI Engine with EGR”, DST and DBT Sponsored, International Conference in Renewable Energy and Green Technology (ICARE-2019), NIT, Kurukshetra, November 2019.

V D Tamilarasan, T Ramesh Kumar, “Fuel Injection Pressure and Combustion Chamber Geometry Effects on the Performance and Emission Characteristics of Diesel Fueled CI Engine with EGR”, 26th National Conference on Internal Combustion Engine and Combustion – NCICEC 2019, Department of Mechanical Engineering, NIT KURUSHETRA and CIIS, NIT-KURUSHETRA, November 2019.

A Ramakrishnan and T Ramesh Kumar, “A Study on Mechanical Properties of TIG Welded Dissimilar Metals”, International Conference on Advances in Materials Processing and Characterization (ICAMPC-2019), BIT, Sathyamangalam, September 2019.

Mr.Baskaran S, Mr.Venkatasa Prabu, Dr.Meenakshi Priya, Dr.Ramesh Kumar T, Mr.N.Dhamodharan, “Agricultural Robots for a Sustainable Green Environment: A Review”, International Conference on Advances in Renewable Energy and Green Technology, ICARE 2019, CO2 Research and Green Technology Centre with NIWE, TERI and UNISA, Vellore Institute of Technology, Vellore, August 2019.

Raaj Kumar AR And T Ramesh Kumar, “Mechanical Behaviour of Al-8011 Metal Matrix Composite”, National Conference in Recent Trends in Engineering , Department of Mech, Rathinam College of Engineering, Coimbatore, March 2019.

Srisaran Venkatachalam, S. Baskaran, R. S. Karrthik, Deepak B. Thimiri Govinda Raj, and T. Ramesh Kumar, “Titanium diboride reinforced aluminum composite as a robust material for automobile applications”, International Conference on Materials, Manufacturing and Machining 2019 A, BIT, Department of Mechanical Engineering, Sathyamangalam, March 2019.

T Ramesh Kumar et al.,, “Analysis and Rectification of Shrinkage in Die”, Advancements in Mechanical, Manufacturing and Civil Engineering (NCAMMCE-18), Department of Mechanical Engineering, M Kumarasamy College of Engineering, Karur, 9th March 2018, March 2018.

T Ramesh Kumar et al.,, “Development and Characterization of Hybrid Composite Materials”, Advancements in Mechanical, Manufacturing and Civil Engineering (NCAMMCE-18), Department of Mechanical Engineering, M Kumarasamy College of Engineering, Karur, 9th March 2018, March 2018.

A Anandha Moorthy, T Ramesh Kumar and C Sasikumar, “Improving the Performance of Centrifugal Pump by applying Self-Lubricating Composite Material as a Material for Plain Bearing”, International Conference on Futuristic Innovations in Mechanical Engineering and Manufacturing Management (ICFIMEMM-17), M Kumarasamy College of Engineering, Karur, March 2017.

A Anandha Moorthy, T Ramesh Kumar, G Senthilkumar, and S Madheswaran, “Vibration Based Condition Monitoring of Plain Bearings Subjected to Radial Load”, Bilateral Second International Conference of Advanced Materials , Department of Mechanical Engineering, Kalasalingam University-KLU, India and Departmento de Engenharia Automotiva, Faculdade Gama Universidade de Brasilia-UnB, Brasilia, Madurai, March 2017.

T Ramesh Kumar, K L Senthil Kumar, A Anandha Moorthy and A D Latha, “Tribological and Mechanical Characteristics of Developed Heat Treated Al-Sn-Si Alloy under Lubricated Conditions”, Bilateral Second International Conference of Advanced Materials , Department of Mechanical Engineering, Kalasalingam University-KLU, India and Departmento de Engenharia Automotiva, Faculdade Gama Universidade de Brasilia-UnB, Brasilia, Madurai, March 2017.

T Ramesh Kumar, K L Senthil Kumar, A Anandha Moorthy and A D Latha, “A Study on Mechanical Behaviours of Newly Developed Aluminium-Based Alloys”, First International Conference of Recent Innovations in Engg., Technology and Management (ICRIETM 2017), Nandha Engineering College, Perundurai, March 2017

P Sangaravadivel, T Ramesh Kumar, N Natarajan and V Krishnaraj, “Prediction of Moss Loss on Copper based Alloy Composite Reinforced with WS2 Particles using Artificial Neural Network”, Eighth National conference on Optimization Techniques in Engg. Sciences and Technologies (OPTEST-2016), Department of Mechanical Engineering, BIT, Sathyamangalam, March 2016.

T Ramesh Kumar and T Naveen Kumar, “Study of Fatigue Behaviour of Bimetal Bearing Materials”, National Level Conference on Recent Trends and Advancements in Mechanical Engineering RTAME16, Department of Mechanical Engineering, Angel College of Engineering and Technology, Tirupur, March 2016.

K Karthikeyan and T Ramesh Kumar, “A Studies on Mechanical Behaviour of Newly Developing Al-Based Bearing Alloy”, Eighth National conference on Optimization Techniques in Engineering Sciences and Technologies (OPTEST-2013), Department of Mechanical Engineering, BIT, Sathyamangalam, April 2013.

T Ramesh Kumar, K Arun, V Jegadeesh and M N Mohamed Fazal, “Design and Optimization of Fixture for Stepped Shaft Used in Submergible Pump”, Eighth National conference on Optimization Techniques in Engineering Sciences and Technologies (OPTEST-2013), Department of Mechanical Engineering, BIT, Sathyamangalam, April 2013.

T Ramesh Kumar, I Rajendran and K L Senthil Kumar, “Mass Loss Prediction of Aluminium-Tin based Plain Bearing Alloy using Artificial Neural Network (ANN)”, Second International Conference of Advances in Materials Processing and Characterization (AMPC 2013), Department of Mechanical Engineering, College of Engineering Guindy, Anna university, Chennai, February 2013.

K Kathirvel, R S Ragavendiran, T Ramesh Kumar and K L Senthil Kumar, “Wear Prediction of Newly Developed Aluminium-Based Alloys Using Optimization Techniques”, Seventh National conference on Optimization Techniques in Engineering Sciences and Technologies (OPTEST-2012), Department of Mechanical Engineering, BIT, Sathyamangalam, April 2012.

R S Ragavendiran, K Kathirvel, K Sathish Kumar, K L Senthil Kumar and T Ramesh Kumar, “Optimization of Dielectric Fluid Parameters in Machining of MMC using EDM”, Seventh National conference on Optimization Techniques in Engineering Sciences and Technologies (OPTEST-2012), Department of Mechanical Engineering, BIT, Sathyamangalam, April 2012.

T Ramesh Kumar and K Chinnarasu, “Comparative Studies on Tribological Properties of Heat Treatable Aluminium-Based Alloys”, Sixth National conference on Optimization Techniques in Engineering Sciences and Technologies (OPTEST-2011), 15-16 April 2011, Department of Mechanical Engineering, BIT, Sathyamangalam, April 2011.

T Ramesh Kumar and K Kannakumar, “Investigation on Tribological Properties of Aluminium-Tin Based Alloy”, Sixth National conference on Optimization Techniques in Engineering Sciences and Technologies (OPTEST-2011), 15-16 April 2011, Department of Mechanical Engineering, BIT, Sathyamangalam, April 2011

T Ramesh Kumar and K L Senthil Kumar, “A Study on Tribological Properties of Aluminium Composite Materials”, Sixth National conference on Optimization Techniques in Engineering Sciences and Technologies (OPTEST-2011), 15-16 April 2011, Department of Mechanical Engineering, BIT, Sathyamangalam, April 2011

S Boopathi, “Optimization of Machining Parameters using Taguchi Technique”, Sixth National conference on Optimization Techniques in Engineering Sciences and Technologies (OPTEST-2011), 15-16 April 2011, Department of Mechanical Engineering, BIT, Sathyamangalam, April 2011.

T Ramesh Kumar, I Rajendran and A D Latha, “Tribological Studies on Aluminium-Tin-Silicon Based Plain Bearing Material”, 7th International Conference on Industrial Tribology (ICIT 2010), Tribology Society of India (TSI), Ranchi, December 2010.

T Ramesh Kumar, Dr I Rajendran, P Karthik, P J Sridhar and K Nandakumar, “A study on Tribological Behavior of Aluminium-Based Bearing Material in Oil Lubricated Conditions”, Third National conference on Optimization Techniques in Engineering Sciences and Technologies (OPTEST-2009), Department of Mechanical Engineering, BIT, Sathyamangalam, March 2009.

T Ramesh Kumar, I Rajendran and K L Senthil Kumar, “Failure Analysis of Carbon Chromium Steel (15cr65) Bearing”, International Conference on Recent Trends in Materials and Mechanical Engineering (ICMME 2008), Department of Mechanical Engineering, Dr Mahalingam College of Engineering and Technology, Pollachi, December 2008.

K L Senthil Kumar, R Sivasubramanian, T Ramesh Kumar and K Kalaiselvan, “Optimization of parameters in machining of composite material using Taguchi technique”, International Conference on Recent Trends in Materials and Mechanical Engineering (ICMME 2008), Department of Mechanical Engineering, Dr Mahalingam College of Engineering and Technology, Pollachi, December 2008.

Vasa Ramu and T Ramesh Kumar, “Design and Analysis of Heat Exchanger”, Third National conference on Optimization Techniques in Engineering Sciences and Technologies (OPTEST-2008), Department of Mechanical Engineering, BIT, Sathyamangalam, March 2008.

T Ramesh Kumar, Dr I Rajendran, K L Senthil Kumar, V C Sathish Gandhi and S Dinakaran, “Failure Analysis of Angular Contact Ball Bearing in Bar Peeling Machine”, National conference on Applications of Finite Element Method (FEM-08), Department of mechanical Engineering, Oxford Engineering College, Bangalore, March 2008.

T V Arjunan, Dr P Venkatachalam and T Ramesh Kumar, “Performance Analysis of Conventional Solar Still”, First National Conference on Emerging Trends in Mechanical Engineering and Sciences (ETIMES-2007), Department of Mechanical Engineering, BIT, Sathyamangalam, December 2007.

V C Sathish Gandhi and T Ramesh Kumar, “Rapid Prototyping Technologies and Benefits”, National Conference on Applications of Advanced Quality Methods in Engineering, Erode Sengunthar Engineering College, Dhudupathi, February 2006.

S.No.	Scholar Name	Register Number	Date of Reg.
1	A KARTHY	21122697205	09/18/2021
2	S BASKARAN	19142691102	12/24/2018
3	RAMAKRISHNAN A	18142691192	07/19/2018
4	PRADEEP A D	18142691138	01/05/2018
5	TAMILARASAN V D	18142691188	12/09/2017
6	M VADIVEL	17132691108	12/22/2016

S.No.	Title	Date	Reg. No.	Status	Level	Funding Agency
1	DESIGN AND FABRICATION OF BROOM STICK MAKING MACHINE	25.12.2022	202241016833	Filed	National	Self
2	DESIGN AND FABRICATION OF CONTACTLESS THERMOMETER	23.12.2021	202141060470	Filed	National	Self
3	DESIGN AND FABRICATION OF CASSAVA HARVESTER	23.12.2021	202141060158	Filed	National	Self
4	OBSTACLE DETECTION USING SENSOR FUSION AND DEEP NEURAL NETWORK FOR MOTION CONTROL OF SMART ELECTRIC	23.12.2021	202141060155	Filed	National	Self
5	Fabrication of Chairless Chair	22.03.2019		Filed	National Level	Self
6	DESIGN OF BULB CHANGING MECHANISM FOR DOMESTIC APPLICATION	18.12.2019	E-2/4037/2019-CHE/201941052570	Filed	Natioal	Self
7	SURFACE CHARACTERIZATION TESTER FOR POLYMER COMPOSITE MATERIALS FUNCTIONING IN ABOVE ROOM TEMPERATURE	02.03.2020	E-2/718/2020-CHE/202041008863	Filed	Natioal	Self

table-responsive table-bordered table-hover"> S.No. Title Date Reg. No. Status Level Funding Agency 1 DESIGN AND FABRICATION OF BROOM STICK MAKING MACHINE 2022-03-25 202241016833 Filed National Self 2 DESIGN AND FABRICATION OF CONTACTLESS THERMOMETER 2021-12-23 202141060470 Filed National Self 3 DESIGN AND FABRICATION OF CASSAVA HARVESTER 2021-12-23 202141060158 Filed National Self 4 OBSTACLE DETECTION USING SENSOR FUSION AND DEEP NEURAL NETWORK FOR MOTION CONTROL OF SMART ELECTRIC 2021-12-23 202141060155 Filed National Self 5 Fabrication of Chairless Chair 22.03.2019 Filed National Level Self 6 DESIGN OF BULB CHANGING MECHANISM FOR DOMESTIC APPLICATION 18.12.2019 E-2/4037/2019-CHE/201941052570 Filed Natioal Self 7 SURFACE CHARACTERIZATION TESTER FOR POLYMER COMPOSITE MATERIALS FUNCTIONING IN ABOVE ROOM TEMPERATURE 02.03.2020 E-2/718/2020-CHE/202041008863 Filed Natioal Self

S.No.	Topic	Program	Venue	Date
1	Trends in Hybrid Natural Fibre Compisites	Webinar	Paavai Engineering College, Namakkal	15.11.2021
2	OBE - In Pursuit of Academic Excellence - VII	Webinar	Karpagam Academy of Higher Education, Coimbatore	28.07.2021
3	National Board of Accreditation (NBA) Awareness Programme	Awareness Programme	M.Kumarasamy College of Engineering, KArur	12.02.2020
4	Economic Development and Tomorrows Mobility with Non-Ferrous Material of Light Weight Construction	National Level Seminar on "Current Trends and Future Scope of Non-Ferrous Weight Materials"	Shree Venkateshwara Hi-Tech Engineering College, Erode	13.07.2019
5	Flow Behavior and Texture Evolution of Lamellar Copper Silver Composite	TNSCST Sponsored one day National level seminar	Vellalar College of Engineering and Technology, Thidal	29.12.2018
6	Gear Trains and its Applications	B.E. (Mechatronics)	SNS College of Technology, Coimbatore	22.03.2018
7	Overview of Dynamics in Automotive System	B.E. (Mechanical)	SRM Valliammai Engineering College, Chennai	26.10.2017
8	Strength of Materials	B.E. (Mechanical)	Angel College of Engineering, Tirupur	27.09.2016
9	Advanced Futures in Pro-E Wildfire 5.0	M.E (Engineering Design)	Nandha Engineering College, Perundurai	29.11.2014

S.No.	Subject Area
1	Tribology
2	Mechanical Properties Testing
3	Optimization