Dr Sasikumar C – Bannari Amman Institute of Technology

Experience Type	Organization	Date of Joining	To	Total Experience
Engineering	BIT-Sathy	02.05.2001
Engineering	Park College of Engineering and Technology	05.01.2001	30.04.2001	0 Year(s) & 3 Month(s)
Engineering	Shrri Laxmi Computers Systems Erode	01.03.1997	14.05.1999	2 Year(s) & 2 Month(s)
Industry	Pallavan Transport Corporation Madras	01.07.1995	30.06.1996	1 Year & 0 Month(s)
Industry	CRR Engineering Works Madras	01.05.1994	30.06.1995	1 Year & 2 Month(s)

Degree	Specialization	Institute	University	Year of Passing
B.E	MECH	KONGU ENGINEERING COLLEGE	Bharathiar University,Coimbatore	1994
M.E	MECH	KONGU ENGINEERING COLLEGE	Bharathiar University,Coimbatore	2000
Ph.D	Biofuel	IRTT Erode	Anna University, Chennai	2018

Tamilvanan, A., Bharathiraja, M., Balamurugan, K., Sasikumar, C. Effect of aluminium oxide nanoadditive on diesel along with gasoline fumigation in single cylinder diesel engine (2022) Journal of Engineering Research (Kuwait), 10 (3), pp. 145-155.
A.Tamilvanan, M.Bharathiraja, K.Balamurugan, C.Sasikumar Effect of Aluminium Oxide Nano Additive on Diesel along with Gasoline Fumigation in Single Cylinder Diesel Engine Journal of Engineering Research DOI : 10.36909/jer.10479 – OCT 2021

C.Sasikumar, K.Balamurugan, S.Jegadheeswaran, RavishankarSathyamurthy Optimization of process parameter in the production of Jatropha Methyl Ester using response surface methodology Biocatalysis and Agricultural Biotechnology 27 In press 1 – 6 JUL 2020

Arjunraj, Jeyakumar P, Bharathiraja and Sasikumar Significance of Intake Manifold Material on Engine Performance Tierarztliche Praxis 40 1 – OCT 2020

C. Sasikumar, A. Muthu Manokar, M. Vimala, D. Prince Winston, A. E. Kabeel, Ravishankar Sathyamurthy, Ali J. Chamkha Experimental studies on passive inclined solar panel absorber solar still Journal of Thermal Analysis and Calorimetry – SEP 2019

Sasikumar . C, Sundaresan . R , Nagaraja . M, Sivahari Shankar.M.S , Karthikeyan . S Bio Oil from Coconut Shells International Journal of Recent Technology and Engineering (IJRTE) 8 4 657 – 659 NOV 2019

Sasikumar C Hydrogen Production and Power Generation from Ocean Waves International Journal of Recent Technology and Engineering (IJRTE) 4S – NOV 2018

Sasikumar C Design and Fabrication of a Solar Car International Journal of Recent Technology and Engineering (IJRET) 4S – NOV 2018

C. Sasikumar, K. Balamurugan, S. Rajendran and S. Naveenkumar Process Parameter Optimization in Jatropha Methyl Ester Yield Using Taguchi Technique Materials and Manufacturing Processes 31 6 701 – 706 DEC 2015

C. Sasikumar, K. Balamurugan, K. M. Nithish Kumar, A. Muthuraja. Nanoparticles added biodiesel to enhance the performance of diesel engine International Journal of Applied Engineering Research (IJAER) 10 62 173 – 180 APR 2015

C. Sasikumar, K. Balamurugan, A. Muthuraja, K. M. Nithish Kumar. Performance improvement of diesel engine using pongamia biodiesel with nanoparticles International Journal of Applied Engineering Research (IJAER) 10 51 719 – 723 APR 2015

Arun S, “EXPERIMENTAL INVESTIGATION OF EDM FOR SURFACE ROUGHNESS AND MRR IN MACHINING OF ALUMINIUM 2024 “, ICRDSET, College of Engineering, Panruti, March 2021

G Sanjay Ganth, “Applied Science, Technology Management and Language Studies “, ASTMLS 2020, Sona College of Technology, Chennai, December 2020

, “Materials, Manufacturing and Machining for Industry 4.0 (ICMMM 2.0) “, ICMMM 2.0, BIT, Sathy, DEpartment of Mechanical Engineering, October 2020

, “Materials, Manufacturing and Machining for Industry 4.0”, ICMMM , BIT, Sathy, Department of Mechanical Engineering, October 2020

C. Sasikumar, “Design and Fabrication of CNC Laser Engraving Machine”, International Conference on Research Advancements , Velammal Institute of Technology, Chennai, Velammal Institute of Technology, Chennai, March 2020

Dr. C. Sasikumar, “Review on Thermal Energy Storage with Phase change materials and its Apploications”, International Conferences on Advances in Materials Research (ICAMR) 2019, Department of Mechanical Engineering, Bannari Amman Institute of Technology, Sathyamangalam, December 2019

Dr. C. Sasikumar, “Study on Effect of Deposition Thickness on temperature distribution of various shaped 3D prinited components “, International Conferences on Advances in Materials Research (ICAMR) 2019, Department of Mechanical Engineering, Bannari Amman Institute of Technology, Sathyamangalam, December 2019

Dr. C. Sasikumar, “Surface Texturing in Piston ring cylinder linear pair for friction reduction – A Review”, International Conferences on Advances in Materials Research (ICAMR) 2019, Department of Mechanical Engineering, Bannari Amman Institute of Technology, Sathyamangalam, December 2019

Dr. C. Sasikumar, “Harvesting of Electricity from Handloom Weaving coupled with Dynamo”, International Conferences on Advances in Materials Research (ICAMR) 2019, Department of Mechanical Engineering, Bannari Amman Institute of Technology, Sathyamangalam, December 2019

C. Sasikumar, “Onion Root and Stem Cutting Machine”, Advancement in Mechanical, Manufacturing , M. Kumarasamy College of Engineering, Karur., M. Kumarasamy College of Engineering, Karur., March 2018

C. Sasikumar, “Prediction system for investigating Process Parameters on Dry sliding wear of Self-lubricating Metal Matrix Composites”, Advances in Industrial Engineering Applications (ICAIEA 2018), Anna University, Chennai., Anna University, Chennai., January 2018

C. Sasikumar, “Feasibility study of an Automobile Leaf Spring using Composite Materials by Finite Element Method”, Recent Advances in Engineering and Technologies â?? ICRAET 2017, Sri Krishna College of Engineering and Technology, Coimbatore., Sri Krishna College of Engineering and Technology, Coimbatore., December 2017

C. Sasikumar, “Investigation on Mechanical Properties of ZA-27/Graphite Reinforced composites routed through squeeze casting process”, Recent Advances in Engineering and Technologies (ICRAET 2017), Sri Krishna College of Engineering and Technology, Coimbatore., Sri Krishna College of Engineering and Technology, Coimbatore., December 2017

C. Sasikumar, “Improving the performance of Centrifugal pump by applying self-lubricating composite material as a material for plain bearing”, Futuristic Innovations in Mechanical Engineering and Manufacturing Management (ICFIMEMM-17), Department of Mechanical Engineering, M. Kumarasamy College of Engineering, Karur, M. Kumarasamy College of Engineering, Karur, March 2017

C. Sasikumar, “Experimental Investigations on Diesel Engine with Jatropha Methyl Ester containing CeO2 Nano fuel Additives”, Optimization Techniques in Engineering Sciences and Technologies (OPTEST 2017), Department of Mechanical Engineering, Bannari Amman Institute of Technology, Sathyamangalam – 638401., Bannari Amman Institute of Technology, Sathyamangalam – 638401., March 2017

C. Sasikumar, “Nanoparticles added biodiesel to enhance the performance of diesel engine”, Advancements in Mechanical, Environmental, Safety and Health Engineering (AMESHE 2015), Knowledge Institute of Technology, Salem., Knowledge Institute of Technology, Salem., May 2015

C. Sasikumar, “Performance improvement of diesel engine using Pongamia biodiesel with nanoparticles”, Advances in Materials and Mechanical Engineering , EGS Pillay Engineering College, Nagapattinam., EGS Pillay Engineering College, Nagapattinam., May 2015

C. Sasikumar, “Performance Improvement of Diesel Engine using Pongamia Biodiesel with Nanoparticles”, Trends in Automotive Parts Systems and Applications (TAPSA 2015), Sri Krishna College of Engineering and Technology, Coimbatore., Sri Krishna College of Engineering and Technology, Coimbatore., March 2015

C. Sasikumar, “Nanoparticles added Biodiesel to enhance the Performance of a Diesel Engine”, Trends in Automotive Parts Systems and Applications (TAPSA 2015), Sri Krishna College of Engineering and Technology, Coimbatore., Sri Krishna College of Engineering and Technology, Coimbatore., March 2015

C. Sasikumar, “Performance and Emission characteristics of Jatropha Methyl Ester Blends with addition of Nanoparticles in Diesel Engine”, Trends in Automotive Parts Systems and Applications (TAPSA 2015), Sri Krishna College of Engineering and Technology, Coimbatore., Sri Krishna College of Engineering and Technology, Coimbatore., March 2015

C. Sasikumar, “Investigation on Tribological studies of Jatropha Methyl Ester with Nano CuO Additives Blend with Two Stroke Engine Oil”, Recent Innovations in Engineering, Sri Subramanya College of Engineering and Technology, Palani., Sri Subramanya College of Engineering and Technology, Palani., April 2014

C. Sasikumar, “Optimization of Jatropha Methyl Ester and its field study in Engine”, Optimization Techniques in Engineering Sciences and Technologies (OPTEST 2014), Department of Mechanical Engineering, Bannari Amman Institute of Technology, Sathyamangalam – 638401., Bannari Amman Institute of Technology, Sathyamangalam – 638401., April 2014

C. Sasikumar, “Experimental Emissions and Tribological studies of Jatropha Methyl Ester with Nano CuO Additives blend with Two engine oil”, Optimization Techniques in Engineering Sciences and Technologies (OPTEST 2013), Department of Mechanical Engineering, Bannari Amman Institute of Technology, Sathyamangalam – 638401., Bannari Amman Institute of Technology, Sathyamangalam – 638401., April 2013

C. Sasikumar, “Introducing Automation concept Design for Idlear Pin Pressing Process”, Optimization Techniques in Engineering Sciences and Technologies (OPTEST 2013), Department of Mechanical Engineering, Bannari Amman Institute of Technology, Sathyamangalam – 638401., Bannari Amman Institute of Technology, Sathyamangalam – 638401., April 2013

C. Sasikumar, “Production of Jatropha Methyl Ester Optimized Alkali-Catalyzed Methonolysis”, Optimization Techniques in Engineering Sciences and Technologies (OPTEST 2013), Department of Mechanical Engineering, Bannari Amman Institute of Technology, Sathyamangalam – 638401., Bannari Amman Institute of Technology, Sathyamangalam – 638401., April 2013

C. Sasikumar, “Experimental Investigations on Interaction Effect of Lubrication and Vibration in Bearings”, Optimization Techniques in Engineering Sciences and Technologies (OPTEST 2012), Department of Mechanical Engineering, Bannari Amman Institute of Technology, Sathyamangalam – 638401., Bannari Amman Institute of Technology, Sathyamangalam – 638401., April 2012

C. Sasikumar, “Production of Jatropha Methyl Ester optimized Alkali – Catalyzed Methanolysis”, Advances in Engineering Design (AED), Department of Mechanical Engineering, Bannari Amman Institute of Technology, Sathyamangalam – 638401., Bannari Amman Institute of Technology, Sathyamangalam – 638401., April 2005

C. Sasikumar, “Co-ordinated Supply Chain Design”, World Class Manufacturing, Amrita Institute of Technology, Coimbatore., Amrita Institute of Technology, Coimbatore., May 2003

C. Sasikumar, “A Survey on Advanced Optimization Techniques and its Industrial Applications”, Advanced Manufacturing Technology, NSS College of Engineering, Palakkad., NSS College of Engineering, Palakkad., February 2003

C. Sasikumar, “Analysis of Flow induced Vibration using CFD”, Digital Aided Modeling and Simulation, Coimbatore Institute of Technology, Coimbatore., Coimbatore Institute of Technology, Coimbatore., January 2003

C. Sasikumar, “Fuzzy Java Expert System Shell (FJESS) for CNC Wire EDM Process”, Recent Trends in Production and Industrial Engineering, G. Pulla Reddy Engineering College, Hyderabad., G. Pulla Reddy Engineering College, Hyderabad., December 2002

S.No.	Subject Area
1	Biofuels with Nanoadditives
2	Theory of Machines
3	Engineering Graphics

S.No.	Title	Date	Reg. No.	Status	Level	Funding Agency
1	REGENERATIVE BRAKING WITH POWER MONITORING SYSTEM	01.04.2021	202141015562	In Progress	National Level	Self
2	DESIGN AND FABRICATION OF STAIRCASE CLIMBER 1	19.04.2021	202141017985	In Progress	National Level	self