Dr Senthilkumar G - Bannari Amman Institute of Technology

Admission Enquiry 2026-2027 Information Brochure 2026-2027 For Admission Contact - 04295 226000 | +91 89401 26000 Smart India Hackathon 2025, 08th to 12th December 2025

Experience Type	Organization	From	To	Total Experience
Engineering	Bannari Amman Institute of Technology, Sathyamangalam	28.02.2001

Degree	Specialization	Institute	University	Year of Passing
B.E	Mechanical Engineering	Kongu Engineering College	Bharathiar University, Coimbatore	1999
M.E	Production Engineering	Government College of Technology	Bharathiar University, Coimbatore	2000
Ph.D	BIO Lubricants	Anna University, Chennai	Anna University, Chennai	2015

S.No.	Subject Area
1	MANUFACTURING
2	BIO-FUELS

Thirumalaikumaran A, Senthilkumar G , Sowmya Dhanalakshmi C, “Experimental Investigation on Thermophysical and Tribological Characteristics of Conventional and Biolubricating Oil Blended With Nanoparticles”, “Indian Journal of Chemical Technology”, Volume No. 32, Pages.441-453, July 2025, DOI: 10.56042/ijct.v32i4.17546 .

N Jayakumar, Senthilkumar G, M Kumar, “Investigation on Geometric, Dimensional Accuracy and Surface Roughness for 3D Printed PLA Via Fused Deposition Modelling (FDM) Process”, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, https://doi.org/10.1177/09544089241312637.

Uma, K, Senthilkumar, G, Balamurugan, K, “Nano Metal Oxide (CuO/Co3O4) Based Feed Stock Filament for FDM”, Journal of Mechanical Science and Technology, Vol. No.37, Issue No.9, Pages. 4817-4823, 2023

Ramachandra Raju, K, Senthilkumar, G, Santhoshkumar, E, Saravanakumar, B, Manikandan, B, Gokul, M, Nalli, N, “Development of a Versatile Ground Nut Shelling Machine with Built-In Roaster”, AIP Conference Proceedings, Vol. No.2492, 2023

Sakthivelmurugan, E, Senthilkumar, G, Kumar, S.M.V, Singh, H, “Cellulosic Fiber Extracted from Alstonia Macrophylla Seed Pods as a Potential Reinforcement for Polymer Composites”, Cellulose Chemistry and Technology, Vol. No.57, Issue No.45019, Pages. 399-408, 2023

Sakthivelmurugan, E, Senthilkumar, G, Karthick, K.N, “Analysis of the Impact of Circular Economy Over Linear Economy in the Paper Processing Industry”, Materials Today: Proceedings, Vol. No.66, Pages. 1446-1452, 2022

Vadivelu, P, Senthilkumar, G, Sivaraj, G, Lakshmanan, D, Uday Ranjan Goud, N, “Performance Analysis of CD Nozzle”, Materials Today: Proceedings, Vol. No.64, Pages. 620-631, 2022

Jayakumar, N, Senthilkumar, G, Vignesh Kumar, S, “Investigation on Surface Defect Machining of AISI 4340 Steel”, Materials Today: Proceedings, Vol. No.66, Pages. 1189-1195, 2022

Ramachandra Raju, K, Senthilkumar, G, Deepakraja, D, Vignesh, M, Surya, S.K, Vivek, G, “Experimental Investigation and Optimization of Machining Parameters of Aluminum Composite Material”, Springer Proceedings in Materials, Vol. No.5, Pages. 1035-1045, 2021

Jayakumar, N, Senthilkumar, G, Vignesh, M, Gokul, V, “Investigation on Normal Hard Turning of AISI 4340 Steel”, Springer Proceedings in Materials, Vol. No.5, Pages. 883-896, 2021

Ramachandra Raju, K, Senthilkumar, G, Arivu, Y, Vignesh, M, Thangeswaran, D, Vivek, G, “Experimental Studies on Milling Parameters for Al6061 Hybrid Metal Matrix Composite”, Springer Proceedings in Materials, Vol. No.5, Pages. 575-588, 2021

Ramachandra Raju, K, Senthilkumar, G, Arivu, Y, Santhosh, T, Prasanth, T, Pradeep, R, “Experimental Investigation on Corrosion Behaviour of Aluminium Alloy Nanoparticles Composite Material”, Springer Proceedings in Materials, Vol. No.5, Pages. 1183-1190, 2021

Ramachandra Raju, K, Senthilkumar, G, Arivu, Y, Sathya, D, Sathya, A, Sandeep, S, “Experimental Investigation on Tribological Behaviour of Alumina Nano Particles Reinforced with Aluminium Alloy Composite Material”, Springer Proceedings in Materials, Vol. No.5, Pages. 521-530, 2021

Jayakumar, N, Senthilkumar, G, Pradeep, A.D, “Effect of Printing Parameters of 3D Printed PLA Parts on Mechanical Properties”, Journal of Engineering Research (Kuwait), Vol. No.9, 2021

Jayakumar, N, Senthilkumar, G, Vigneshwaran, S, Ajay Kumar, K.G, “Comparison of Stress Distribution on Dental Implant with Different Abutment Types”, Materials Today: Proceedings, Vol. No.45, Pages. 7970-7979, 2021

Jayakumar, N, Senthilkumar, G, Aravinda Samy, S, Karthick, V, Renganathan, T, “Comparison of Stress Analysis for Dental Crown (FPD) for Various Materials”, Materials Today: Proceedings, Vol. No.45, Pages. 7939-7950, 2021

Ramachandra Raju, K, Senthilkumar, G, “Investigation on Properties of LM26 Hybrid Composite Material with Ceramic Reinforcements”, Materials Today: Proceedings, Vol. No.45, Pages. 8086-8093, 2021

Sakthivelmurugan, E, Senthilkumar, G, Tajdeen, A, Manojkumar, S, “Application of Lean Six Sigma in Reducing the Material Consumption at Wards in a Selected Healthcare Unit”, Materials Today: Proceedings, Vol. No.45, Pages. 8011-8016, 2021

Sakthivelmurugan, E, Senthilkumar, G, Tajdeen, A, “Foraging Behaviour Analysis of Swarm Robotics System Using Design of Experiments”, Materials Today: Proceedings, Vol. No.45, Pages. 1170-1174, 2021

Sakthivelmurugan, E, Senthilkumar, G, Ramakrishnan, A, Selvamuthukumaran, D, “Analysis of Searching Task Using Chain Method in Swarm Robotics”, International Journal of Recent Technology and Engineering, Vol. No.7, Issue No.4, Pages. 66-70, 2019

Sakthivelmurugan, E, Senthilkumar, G, Prithiviraj, K.G, Tinu Devraj, K.R, “Foraging Behavior Analysis of Swarm Robotics System”, MATEC Web of Conferences, Vol. No.144, 2018

Senthilkumar, G, Balamurugan, K, Mohanraj, J, “Emission Characteristics of Sunflower Oil Based Bio-Compatible Blends of 2T Oil”, Journal of Scientific and Industrial Research, Vol. No.74, Issue No.1, Pages. 48-51, 2015

Senthilkumar, G, Balamurugan, K, “Rheological, Wear and Thermal Stability Studies on Sunflower Oil with Natural and Nano Metal Additives”, International Journal of Applied Engineering Research, Vol. No.9, Issue No.23, Pages. 21739-21746, 2014

Senthilkumar, G, Balamurugan, K, “Process Parameters Optimization for Synthesis of Methyl Ester from Sunflower Oil Using Taguchi Technique”, Carbon – Science and Technology, Vol. No.6, Issue No.3, Pages. 22-29, 2014

K Ramachandra Raju and G Senthilkumar, “Development of a Versatile Ground Nut Shelling Machine with Built-In Roaster”, Advancements in Aeromechanical Materials for Manufacturing , MLR Institute of Technology, Hyderabad, August 2021.

Santhosh Kumar E, Senthilkumar G, “Tribological Investigation of the Nano Graphene Added Commercial Engine Lubricant “, International Conference on Research and Advances in Mechanical Engineering (ICRAME2020), Department of Mechanical Engineering, Vignan Institute of Technology and Science, Hyderabad, December 2020.

Sakthivelmurugan Erusagounder, Senthilkumar G, Tajdeen A, “Foraging Behavior Analysis of Swarm Robotics System using Design of Experiments”, International Conference on Advances in Materials Research (ICAMR 2019), Department of Mechanical Engineering, Bannari Amman Institute of Technology, Sathyamangalam, December 2019.

K Uma, G Senthilkumar , “Production and Characterization of Copper Reinforced ABS Filament for FDM”, Recent Innovations in Welding and Surface Engineering (RIWASE 2019), Department of Mechanical Engineering, Government College of Engineering, Bargur, July 2019.

A Anandamoorthy, E Prakash, S Madheswaran, G Senthilkumar and C Sasikumar, “Prediction System for Investigating Process Parameters on Dry Sliding Wear of Self – Lubricating Metal Matrix Composites”, Advances in Industrial Engineering Applications (ICAIEA 2018), Anna University, Chennai, January 2018.

E. Sakthivelmurugan , G. Senthilkumar and K. G. Prithiviraaj, “Foraging behavior analysis of swarm robotics system”, Research in Mechanical Engineering Sciences (RIMES 2017), Manipal University, Mangalore, December 2017.

E Sakthivelmurugan, G Senthilkumar, K G Prithiviraj and K R Tinuraj, “Foraging Behavior Analysis of Swarm Robotics System”, MATEC Web of conferences, Manipal University, Mangalore, December 2017.

E. Soundarapandian, G. Senthilkumar and P. Vivekkumar, “Experimental Investigation on Properties of Web Gland prepared by Selective Laser sintering Process”, International Conference on New Frontiers of Engineering, Science, Management and Humanities (ICNFESMH -2017), Institution of Electronics and Telecommunication Engineers (IETE), New Delhi, September 2017.

A Anandha Moorthy, T Ramesh Kumar, G Senthilkumar, and S Madheswaran, “Vibration Based Condition Monitoring of Plain Bearings Subjected to Radial Load”, Bilateral Second International Conference of Advanced Materials , Department of Mechanical Engineering, Kalasalingam University-KLU, India and Departmento de Engenharia Automotiva, Faculdade Gama Universidade de Brasilia-UnB, Brasilia, Madurai, March 2017.

V. Veerapandi Prabhu, G. Senthilkumar, K. Balamurugan, and M. Bharath, “Investigation of sunflower lubricants with nano additives in petrol engines.”, Optimization Techniques in Engineering Sciences and Technology (OPTEST – 2017), Department of Mechanical Engineering, Bannari Amman Institute of Technology, Sathyamangalam, March 2017.

V. Veerapandi Prabhu and G. Senthilkumar, “Review on Sunflower based Lubricants with Nanoparticle Additives in Engines”, International Conference on Automobile Engineering (ICAE2017), PSG College of Technology, Coimbatore, January 2017.

M Maheswaran, G Senthilkumar and U Periyar Selvam, “Implementing the risk assessment and reasons causation model for machinery operation “, Optimization Techniques in Engineering Sciences and Technology (OPTEST – 2016), Department of Mechanical Engineering, Bannari Amman Institute of Technology, Sathyamangalam, April 2016.

U Periyar Selvam, G Senthilkumar and M Maheswaran, “Health and safety management system guidelines for elevator installation site”, Optimization Techniques in Engineering Sciences and Technology (OPTEST – 2016), Department of Mechanical Engineering, Bannari Amman Institute of Technology, Sathyamangalam, March 2016.

J. Praveen Rex and G. Senthilkumar, “Sunflower based biodiesel with maximum yield production using Response Surface Methodology”, Emerging Technologies in Mechanical Engineering to meet Industrial Needs, Department of Mechanical Engineering, NSN college of Engineering and Technology, Karur, March 2016.

G. Dinesh, K. Karthik and G. Senthilkumar, “Environmetal impact by using biodiesel blends”, Green Automobile Conceptualizations Towards Sustainable Development 2014 (ATIME 14), Nandha College of Technology, Erode, October 2014.

G. Senthilkumar, K. Balamurugan and R. Karthi, “Preparation of Sunflower based Lubricants and its Optimization”, International Conference on Advance Trends in Engineering and Technology (ICATET -2014), Arya College of Engineering , Rajastan, April 2014

G Senthilkumar, K Balamurugan and R Karthi, “Optimization of sunflower based biodiesel and its wear studies with nano additives in lubricant applications”, Optimization Techniques in Engineering Sciences and Technology (OPTEST – 2014), Department of Mechanical Engineering, Bannari Amman Institute of Technology, Sathyamangalam, April 2014.

G. Senthilkumar, K. Balamurugan, S. Karthi and V. Veerapandi Prabhu, “Production of sunflower oil methyl esters by optimized alkali-catalyzed methanolysis”, Optimization Techniques in Engineering Sciences and Technology (OPTEST – 2013), Department of Mechanical Engineering, Bannari Amman Institute of Technology, Sathyamangalam, April 2013.

G SenthilKumar, K Balamurugan, V Veerapandi Prabhu and S Karthi, “Experimental investigation of sunflower based lubricants with nano particle additives in petrol engines.”, Optimization Techniques in Engineering Sciences and Technology (OPTEST – 2013), Department of Mechanical Engineering, Bannari Amman Institute of Technology, Sathyamangalam, April 2013.

G Senthil Kumar, K Balamurugan, S Karthi and V Veerapandi Prabhu, “Studies on sunflower based lubricants and its maximum yield production – A review”, Green Automobile Conceptualizations Towards Sustainable Development – 2012 (GACSD – 2012), Department of Automobile Engineering, Kavery College of Engineering, Mecheri, October 2012.

G Senthil Kumar, K Balamurugan, V Veerapandi Prabhu and S Karthi, “Studies on sunflower based lubricants with nano particles additives in engine – A review”, Green Automobile Conceptualizations Towards Sustainable Development – 2012 (GACSD – 2012), Department of Automobile Engineering, Kavery College of Engineering, Mecheri, October 2012.

G Senthil Kumar, K Balamurugan, P Karthi, R Karthi and S Karuppusamy, “Experimental studies on pungam oil based lubricant for engine applications”, Green Automobile Conceptualizations Towards Sustainable Development – 2012 (GACSD – 2012), Department of Automobile Engineering, Kavery College of Engineering, Mecheri, October 2012.

G Senthilkumar, K Balamurugan and J Mohanraj, “Experimental studies on sunflower based lubricant for two stroke engines”, Innovations in Engineering and Technology for Sustainable Development (IETSD – 2012), Bannari Amman Institute of Technology, Sathyamangalam, September 2012.

M Nidheesh and G Senthilkumar, “Design Management Using PDM Techniques”, Advances in Engineering Design (AED- 2005), Department of Mechanical Engineering, Bannari Amman Institute of Technology, Sathyamangalam, April 2011.

G Senthil Kumar, K Balamurugan, S Vinu, M Radhakrishnan and G Senthil Prabhu, “Tribological Test and Emission Analysis of 2 stroke Lubrication oil blend with Sunflower Methyl Ester in Petrol Engines”, Optimization Techniques in Engineering Sciences and Technology (OPTEST – 2011), Department of Mechanical Engineering, Bannari Amman Institute of Technology, Sathyamangalam, April 2011.

G Senthil Kumar, K Balamurugan, A G Sasikumar and P Subhash Chandran, “Productivity Improvement in ASRS – A Case study”, Optimization Techniques in Engineering Sciences and Technology (OPTEST – 2009), Department of Mechanical Engineering, Bannari Amman Institute of Technology, Sathyamangalam, March 2009.

M Vykunta Rao , “Mathematical Analysis of Cold Foil Rolling and Neural Network Modelling”, Optimization Techniques in Engineering Sciences and Technology (OPTEST – 2006), Department of Mechanical Engineering, Bannari Amman Institute of Technology, Sathyamangalam, April 2006.

G Sasikumar and G. Senthil Kumar, “Development of 3-Dimensional Inventory Control Model For Computerised Spare Parts Management â?? A Case Study”, International Conference on Operation Research for Development (ICORD-2002), Anna University, Chennai, December 2002.

K L Senthil Kumar, G Sasikumar and G. Senthil Kumar, “Automatic Codification and Computer Aided Inventory Management System (ACCAIMS) – A Case Study”, International Conference on Operation Research for Development (ICORD-2002), Anna University, Chennai , December 2002.

S.No.	Scholar Name	Register Number	Date of Reg.	Title of the Ph.D Thesis / Tentative title of the Research	Status
1	Veera Pandi Prabhu V	16142697201	Jul-2016	Studies of Bio Fuels with Nano Particles	Registration Confirmed
2	Jayakumar N	18122691193	Jan-2018	New Material Development in 3D Printing	Registration Confirmed
3	Vivek Kumar P	18122691330	Jan-2018	Experimental Study of Cellular Structure using Rapid Prototyping Process	Registration Confirmed
4	Sakthivelmurugan E	18132691169	Jan-2018	Effective Utilization of Resources using Industrial Engineering Concepts	Thesis Submitted
5	Ramachandra Raju K	18132697102	Jul-2018	Investigation of Properties on Heat Treated Aluminum ZRB2 Metal Matrix Composite Material by Halde Salts Synthesising in In-Situ Process	Registration Confirmed
6	Uma K	18222697150	Jul-18	Wear and Thermal Analysis of Nano Cuo Filled Composite Parts Printed By FDM	Registration Confirmed
7	Soundrapandian E	18132691332	Jan-2018	Development of New Material and Optimization of 3D Printing	Registration Confirmed
8	Vadivelu P	21142691262	Jan-2021	Investigation of Creep and Tribology Characteristics of Aerospace Material	Registration Confirmed
9	Thirumalaikumaran A	21142691148	Jan-2021	The Tribological Behaviour of Nanoparticles Mixed Lubricating Oil	Registration Confirmed

S.No.	Title	Date	Reg. No.	Status	Level	Funding Agency
1	AN IMPROVED PEDESTAL FAN SYSTEM	27.11.2019	201941048596	Licensed	National Level
2	A DEVICE TO COLLECT WASTE FROM ROAD SURFACE	27.12.2019	201941054202	Licensed	National Level

S.No.	Topic	Program	Venue	Date
1	Bio Fuels - The Fuel of the Future	Guest Lecture	Erode Institute of Technology, Kavindapadi	17.08.2017
2	Plastics and its manufacturing Process	Guest Lecture	SNS College of Technology, Coimbatore	05.10.2016
3	Forming and Shaping of Plastics	Guest Lecture	SNS College of Technology, Coimbatore	20.10.2015