Dr Siddharthan B - Bannari Amman Institute of Technology

Experience Type	Organization	From	To	Total Experience
Engineering	Bannari Amman Institute of Technology, Sathyamangalam	10.05.2019
Engineering	K.S.Rangasamy College of Technology	01.06.2015	30.04.2019	3 Year(s) & 11 Month(s)

Degree	Specialization	Institute	University	Year of Passing
B.E.	Production Engineering	J.J. College of Engineering and Technology	Anna University, Chennai	2013
M.E.	Computer Aided Design	K.S.Rangasamy College of Technology	Anna University, Chennai	2015
Ph.D	Mechanical Engineering	K.S.Rangasamy College of Technology	Anna University, Chennai	2025

S.No.	Subject Area
1	Manufacturing Technology
2	Machine Design
3	Composite Materials

Gibi M, Prakash P, Siddharthan B”” “Enhancing Mechanical Properties of PETG-CNT Nanocomposites Fabricated via Fused Filament Fabrication”, “”Malaysian Journal of Chemistry””, Volume No. 27, Issue No. 3, Pages. 455-463, Jun 2025, DOI: https://doi.org/10.55373/mjchem.v27i3.455.

Siddharthan B, Kumaravel A,“Experimental Investigation and Comparative Analysis of LM13 Hybrid Composite Reinforced with Zirconium Carbide and Carbon Short Fibres”, “”Malaysian Journal of Chemistry””, Volume No. 27, Issue No.3, Pages.391-399, Jun 2025, DOI: https://doi.org/10.55373/mjchem.v27i3.391.

Siddharthan B, Kumaravel Arumugam, “Wear Behaviour of Titanium Diboride and Zirconium Carbide Reinforced LM13 Hybrid Composite for Automotive Applications”, Materials Testing, Vol. 66, No. 11, 2024, Pages. 1829-1842. Https://Doi.Org/10.1515/Mt-2024-0143.

Siddharthan B, Dhinesh S K, Nagarajan P, Raghunath M, Sundar S and Prasanna A,”Design and Fabrication of an Automated Paper-Cutting Machine for Re-Using Waste Papers”

Siddharthan B and Kumaravel A, “Identifying Stir Casting Process Parameters to Maximize Strength of Lm13 With Tib2 and Zrc Hybrid Metal Matrix Composite”, Materials Testing, Vol. No.66, Nov 2023

Sathish Kumar, R, Manoj Kumar, R, Saravanan, B, Pavithran, D, Siddharthan, B, Uday Ranjan Goud, N, “Development of an Efficient Process for Recycling of Lithium-Ion Batteries”, AIP Conference Proceedings, Vol. No.2492, 2023

Siddharthan, B, Kumaravel, A, Praveen J, J, “Mechanical and Electrical Characterization of Aluminium Alloy Metal Matrix Composites Reinforced With Graphite”, Materials Today: Proceedings, Vol. No.66, Pages.1413-1418, 2022

Siddharthan, B, Kumaravel, A, “Experimental Study on Machinability of Metal Matrix Composite By Abrasive Water Jets”, Springer Proceedings in Materials, Vol. No.5, Pages.1001-1013, 2021

Praveen, S.M, Saravanan, B, Siddharthan, B, Kumaragurubaran, S.B, “Thermal Management in Conventional Diesel Engines”, Materials Today: Proceedings, Vol. No.45, Pages.1161-1165, 2021

Siddharthan, B, Rajiev, R, Saravanan, S, Naveen, T.K, “Effect of Silicon Carbide in Mechanical Properties of Aluminium Alloy Based Metal Matrix Composites”, IOP Conference Series: Materials Science and Engineering, Vol. No.764, Issue No.1, 2020

Tamilarasu, P, Jones Praveen, J, Siddharthan, B, Vivek, U, Giridharan, M, “Enhancing the Material Properties of En24 Pinion Material By Heat Treatment Process”, IOP Conference Series: Materials Science and Engineering, Vol. No.764, Issue No.1, 2020

Thiyagu, S, Naveen, T.K, Siddharthan, B, Manirathnam, A.S, “Numerical Investigation and Performance Enhancement of 210 Mw Boiler By Utilization of Waste Heat in Flue Gas”, Materials Today: Proceedings, Vol. No.33, Pages.756-762, 2020

Siddharthan B, M Prasath, P S Sampath, S Karthick, “Optimization of Process Parameters in Fused Deposition Modelling and their Impact on the Mechanical Properties of Polyamide 12 Material”, MAHSA International Technology and Engineering Conference (MI-TECH)”, BIT, 2024.

Siddharthan B, Dr Kumaravel A, Jones Praveen J, “A Review on Dry Sliding Wear Characteristics of AA8011 Based Composites”, International Conference on “Recent Innovations in Robotics, Construction and Mechanical Sciences (ICRIRCMS 2022)”, KSR Engineering College of Tecnology, 2022.

Siddharthan B, Dr Kumaravel A Jones Praveen J, “Synthesis and Characterization of Aluminium Hybrid Metal Matrix Composites – A Review”, International Conference on “Recent Innovations in Robotics, Construction and Mechanical Sciences (ICRIRCMS 2022)”, BIT, 2022.

Siddharthan B, Dr Kumaravel A, “Effect of Hybrid Reinforcements in Aluminium Based MMC By Powder Metallurgy Process”, 2nd International Conference on “Mechatronics in Energy and Environment Protection (ICMEEP 2021)”, BIT, 2021.

Jones Praveen J., Siddharthan B. and Divyakumar P., “Additive Manufacturing of Graded B4C – Al Cermets with Complex shapes”, International Conference on Mechatronics in Energy and Environment Protection, October 2020.

Siddharthan B., Mohamed Riyaz A., Mohamed Riyan N., Naven Kumar S and Shiva G., “Mechanical Characterization of Powder Metallurgy based Aluminium Metal Matrix Hybrid Composite”, First International Conference of Sustainable Infrastructure with Smart Technology for Energy and Environmental Management, September 2020.

Siddharthan B. and Dr. A. Kumaravel, “Experimental study on Machinability of Metal Matrix Composites by Abrasive Water Jets”, International Conferences on Advances in Material Research, ICAMR 2019, December 2019.

Siddharthan B., Rajiev R. and Saravanan B., “Fabrication and Charecterization of Alumina and Boron Carbide Reinforced Hybrid Metal Matrix Composites”, International Conferences on Advances in Material Research, ICAMR 2019, December 2019.

Siddharthan B., Rajiev R., Saravanan S., Naveen T K, “Effect on Silicon Carbide in Mechanical Properties of Aluminum Alloy based Metal Matrix Composites “, International Conference on Advances in Materials Processing and Characterization (ICAMPC-2019), Bannari Amman Institute of Technology, September 2019.

P. Tamilarasu, J. Jones Praveen, B. Siddharthan, U. Vivek, M. Giridharan, “Enhancing the material properties on En24 pinion materials by heat treatment process”, International Conference on Advances in Materials Processing and Characterization (ICAMPC-2019), September 2019.

Siddharthan B., BalaYogesh V, Mani Bharathi M, Chandresh A., “Experimental Investigation of Tribological Behavior of Aluminium Alloy Based Metal Matrix Composites “, AICTE and SERB Sponsored International Conference on Smart Applications for Environmental Quality Assessment and Promoting Health Care Systems using Internet of Things (ICSAIOT – 2019), K.S. Rangasamy College of Technology, August 2019.

Siddharthan B., Divyakumar P., Kalaiselvan M.C., Hendry Thomas X., “Machinability studies on metal matrix composites using abrasive water jet machining”, AICTE and SERB Sponsored International Conference on Smart Applications for Environmental Quality Assessment and Promoting Health Care Systems using Internet of Things (ICSAIOT – 2019), K.S. Rangasamy College of Technology, Tiruchengode, August 2019.

Siddharthan B., Ramesh C., Prakash P., Naveen T.K, “Mechanical and Tribological behavior of Stir cast Aluminium Matrix composites”, National Conference on Innovation in Engineering and Technology, Salem, March 2017.

Ramesh C., Prakash P., Naveen T.K., Siddharthan B., “Theoretical and Experimental Investigations of Mechanical Properties of Hardfaced Aluminium by TIG Welding”, International Conference on Recent Advancements In Design, Automation and Intelligent Systems (ICRADAIS 2K16), Dr. N.G.P. Institute of Technology, Coimbatore, March 2016.

Dr.A.Kumaravel, Siddharthan B., Dr.M.Kanthababu, “Machining of Metal Matrix Composites by Abrasive water jet machining”, National Conference on Advancements in Mechanical, Environmental, Safety and Health Engineering, Knowledge Institute of Technology, Salem, May 2015.

B. Siddharthan and Dr. A. Kumaravel, “Deformation control on Work piece fixture system by using finite element analysis”, National Conference on Recent Advancements in Mechanical Engineering , Department of Mechanical Engineering, K.S. Rangasamy College of Technology, Tiruchengode, April 2015.

B. Siddharthan and Dr. A. Kumaravel, “Design optimization by FEM”, National Conference on Contemporary Approaches in Design and Manufacturing, Department of Mechanical Engineering, Alagappa Chettiar College of Engineering and Technology, Karaikudi, March 2014.

Siddharthan B., S. Soban, P. Arulpandian and Dr. A. Kumaravel, “Deformation Control of Work piece Fixture System by Using Finite Element Analysis”, National Conference on Recent Trends in Mechanical Engineering (NCRTME 2014), Department of Mechanical Engineering, SNS College of Engineering, Coimbatore, Coimbatore, March 2014.

S.No.	Title	Date	Reg. No.	Status	Level	Funding Agency
1	DELIVERY DRONES	10.06.2023	396785-001	Filed	National	Self
2	DIAGNOSING CHRONIC KIDNEY DISEASE USING MACHINE LEARNING	18.05.2023	202341034793	Filed	National	Self
3	ENVIRONMENT FRIENDLY AUTOMATIC DRAINAGE BLOCK REMOVAL SYSTEM	27.05.2022	202041051670	Published	National	Self
4	PLANETARY GEAR TRAIN FOR A TRANSMISSION ASSEMBLY OF BICYCLE	26.09.2022	202141007721	Published	National	Self
5	DESIGN AND FABRICATION OF CONFINED SPACE WORKING BOT	29.07.2022	202241043499	Filed	National	Self
6	TOWER BOLT	30.09.2021	202141044364	Filed	National	Self

S.No.	Topic	Program	Venue	Date
1	Personality Development		K.S. Rangasamy College of Technology	20.11.2020

S.No.	Membership Number	Membership Body	Year	Duration
1	392462	International Association of Engineers	2024	Life Time