Dr Sureshkumar M - Bannari Amman Institute of Technology

Degree	Specialization	Institute	University	Year of Passing
B.E	Mechanical Engineering	Thanthai Periyar Govt Institute of Technology	Anna University, Chennai	2009
M.E	Engineering Design	Bannari Amman Institute of Technology	Anna University, Chennai	2012
Ph.D	Mechanical Engineering	Bannari Amman Institute of Technology	Anna University, Chennai	2022

Rajamurugu Natarajan, Yaknesh Sambath, Subramaniyan Chinnasamy, Prakash K B, Asit Mohanty, Suresh Kumar M and Arul M, “Advancements in solar updraft towers: A comprehensive review”, E3S Web of Conf, Volume 488, 2024, 1st International Conference on Advanced Materials & Sustainable Energy Technologies (AMSET2023), Article Number 02019, Number of page(s). 23, https://doi.org/10.1051/e3sconf/202448802019.

Boopathi, S., Sureshkumar, M., Sathiskumar, S., “Parametric Optimization of LPG Refrigeration System Using Artificial Bee Colony Algorithm”, Lecture Notes in Mechanical Engineering, Vol. No., Issue No., pp.97-105, 2023

Saravanan, M., Vasanth, M., Boopathi, S., Sureshkumar, M., Haribalaji, V., “Optimization of Quench Polish Quench (QPQ) Coating Process Using Taguchi Method”, Key Engineering Materials, Vol. No.935, Issue No., pp.83-91, 2022

Jeyakymar, M., Munusami, V., Shanmugam, P., Boopalan, N., Boopathi, S., Sureshkumar, M., “An investigation on wear loss and hardness of nitro-carburizing coated stainless-steel grade-316”, Materials Today: Proceedings, Vol. No.66, Issue No., pp.1398-1404, 2022

Gunasekaran, K., Boopathi, S., Sureshkumar, M., “ANALYSIS OF A CRYOGENICALLY COOLED NEAR-DRY WEDM PROCESS USING DIFFERENT DIELECTRICS [ANALIZA KRIOGENSKO OHLAJENEGA SKORAJ POPOLNO SUHEGA PROCESA EROZIJE Z UPORABO RAZLIČNIH DIELEKTRIKOV]”, Materiali in Tehnologije, Vol. No.56, Issue No.2, pp.179-186, 2022

Sathiskumar, S., Sureshkumar, M., Kumar, R.V.R., Aswathaman, R., Dhavaneeswaran, N., “Effects of gasoline fumigation on the performance and emission characteristics of CI engine fuelled with mahua biodiesel”, AIP Conference Proceedings, Vol. No.2317, Issue No., pp.-, 2021

Sureshkumar, M., Madan Mohan, S., “Review on Manufacturing and Development of Ni-Ti Shape Memory Alloys”, Springer Proceedings in Materials, Vol. No.5, Issue No., pp.859-865, 2021

Deepankumar, S., Saravanan, B., Yuvaraj, D., Ramesh Kumar, T., Sureshkumar, M., Simmon, K.V., “Simulation and Analysis with Material Optimization of Automobile Suspension Using Multi-body Dynamic”, Springer Proceedings in Materials, Vol. No.5, Issue No., pp.309-320, 2021

Sampath, B., Sureshkumar, M., Yuvaraj, T., Velmurugan, D., “Experimental investigations on eco-friendly helium-mist near-dry wire-cut edm of m2-hss material”, Materials Research Proceedings, Vol. No.19, Issue No., pp.175-180, 2021

Sureshkumar, M., Chinnasamy, S.G.V., “Investigation of a tool and workpiece machined using a nickel-nanocoated insert”, Materiali in Tehnologije, Vol. No.52, Issue No.2, pp.171-175, 2018

Mohanakrishnan, D., Sureshkumar, M., “A comparative analysis of orientation on the shape memory effect of fabric reinforced shape memory polymer composites”, Materials Science Forum, Vol. No.830-831, Issue No., pp.529-532, 2015

Sureshkumar, M., Tamilselvam, P., Kumaravelan, R., Dharmalingam, R., “Design, fabrication, and analysis of a hybrid FIBER composite monoleaf spring using carbon and E-glass fibers for automotive suspension applications”, Mechanics of Composite Materials, Vol. No.50, Issue No.1, pp.115-122, 2014

Sureshkumar M, “Implementation of Value Stream Mapping Technique in Plant Layout”, International Conference on “ICATRE 2022”, Nehru Institute Of Technology, 2022.

Sureshkumar M, “Remote Controlled Industrial Trolley”, International Conference on “IRPEE – 2022”, Arasu Engineering College, 2022.

Sureshkumar M, “Implementing the Combination of Emergency Intelligence and Anti-Lock Braking System”, International Conference on IRPEE – 2022”, Arasu Engineering College, 2022.

Sureshkumar M, “Working on Damping Properties of Grey Cast Iron”, International Conference on “ICAMAT 2022”, BIT, 2022.

Sureshkumar M, “Development of Mechanical Properties of Metal Matrix Composite by Cryogenic Treatment”, International Conference On “Technologies For Green Mobility” – 2021”, BIT, 2021.

Sureshkumar M, “Microstructure and Homogeneity of Equal Channel Angular Extrusion of Aluminium Alloy”, International Conference on “Technologies For Green Mobility- 2021”, BIT, 2021.

Sureshkumar M, “Finite Element Analysis of Equal Channel Angular Extrusion Process”, 3nd International Conference on “Current Research in Engineering & Technology”, International Institute Of Research In Multidisciplinary Skill Development Trust, 2021.

S Deepankumar, B Saravanan, D Yuvaraj, T Ramesh Kumar, M Sureshkumar, K Vinoth Simmon, “Simulation and Analysis with Material Optimization of Automobile Suspension using Multi-Body Dynamics”, ICAMR-2019, Department of Mechanical Engineering, BIT, Sathyamangalam, December 2019.

SURESHKUMAR M, BOOPATHI S, SABAREESH M, PALANIAPPAN V R, “Improving Wear Resistance Properties of Molybdenum Rod Under Cryogenic Treatment”, Advances in Materials(AMPCO-17), IIT, Roorkee, November 2017.

SURESHKUMAR M, BOOPATHI S, “Mathematical Modelling of Dry sliding wear Behaviour of Cryogenic Trated Molybdenum material “, BIT MIST 17, Bannari Amman Institute of Techology, Sathyamangalam, November 2017.

SURESHKUMAR M, YUVARAJ D, “Emission and Tribological Studies of Nano Copper Oxides Additives on Jatropha Methyl Ester Blend With Synthetic Mineral Oil in Petrol Engine”, International Conference on Renewable Energy and Sustainable Environment, Dr Mahalingam College of Engineering and Technology, Pollachi, July 2017.

SURESHKUMAR M, “Design and Fabrication of Automatic Cloth Cutting Machine “, OPTEST 2017, Bannari Amman Institute of Techology, Sathyamangalam, March 2017.

SURESHKUMAR M, “Optimization of Powder Mixed Near-Dry Wire Cut Electrical Discharge Machining of Inconel 718”, ICSMET 2015 , Vellore Institute of Technology, Vellore, November 2015.

SURESHKUMAR M, VEDAMOORTHY A, “Optimization of Powder Mixed Near-Dry Machining “, CADAM-15 , CADAM, September 2015.

SURESHKUMAR M, MOHANAKRISHNAN D, “Comparative Analysis Orientation on Shape Memory Effect of Fibre Reinforced Shape Memory Composite”, ICAMPS 2015, Indian Institute of Metals, Thiruvananthapuram, May 2015.

SURESHKUMAR M, MOHANAKRISHNAN D, “Effect Orientation on Shape Memory Performance of Epoxy Based Shape Memory Polymer Composites”, AMMA 2015, National Institute of Technology, Trichy, April 2015.

SURESHKUMAR M, “Optimization of Near Dry Wire Cut Electrical Discharge Machining Process using Grey-Fuzzy Logic”, OPTEST 2014, Bannari Amman Institute of Techology, Sathyamangalam, April 2014.

MOHANAKRISHNAN D, SURESHKUMAR M, “Synthesis and Characterization of Epoxy based Shape Memory Polymer Composite”, OPTEST 2014 , Bannari Amman Institute of Techology, Sathyamangalam, April 2014.

MOHANAKRISHNAN D, SURESHKUMAR M, “Fiber reinforced shape memory polymer composites-review “, ICRAMID – 2014 , Ponjesly College of Engineering, Nagercoil, March 2014.

Degree	Title	Investigator(s)	Funding Agency	Amount	Project Status	Sanction Date
1	Cryogenic dielectric near-dry reciprocating Wire-cut Electrical Discharge machining Process	Dr S Boopathi	TNSCST	4.36 Lakhs	Submitted

S.No.	Title	Date	Reg. No.	Status	Level	Funding Agency
1	DESIGN AND FABRICATION OF SMART BLIND STICK FOR VISUALLY IMPAIRED PERSONS	20.02.2023	202341011360	Filed	National	Self
2	UNDERWATER VEHICLE FOR INSPECTION PURPOSES	02.01.2023	376539-002	Filed	National	Self
3	EDIBLE BIOFILM INDICATOR FOR MEAT PACKAGING AND THEREOF	11.11.2022	202241064506	Filed	National	Self
4	PROCESS METHODOLOGY FOR THE PREPARATION OF WAFFLES USING RAGI HUSK AND WHIPPED CREAM USING RAGI MILK	27.05.2022	202241029089	Published	National	Self
5	PROCESS METHODOLOGY FOR THE PREPARATION OF WAFFLES USING RAGI HUSK AND WHIPPED CREAM USING RAGI MILK	20.05.2022	202241029089	Filed	National	Self
6	DEVICE FOR UNDERWATER INSPECTION AND RESCUE	27.12.2021	353960-001	Filed	National	Self
7	CRYOGENIC-DIELECTRIC SETUP FOR NEAR-DRY RECIPROCATING WEDM	19.02.2019	201941006293	Filed	National	Self
8	FOOT OPERATED DOOR STOP RELEASING ATTACHMENT FOR THE EXISTING SLIDING DOOR STOPPER	04.01.2021	202141000039	Filed	National	Self

S No.	Topic	Program	Venue	Date
1	Testing of Composite Materials as per the ASTM Standard	Practical Approach on Mechanical,Tribological,and Machining Behaviour of Metal Matrix Composites	Bannari Amman Institute of technolgy	17.02.2018