Dr Tajdeen A - Bannari Amman Institute of Technology

Smart India Hackathon 2025, 08th to 12th December 2025

Admission Enquiry 2026-2027 Information Brochure 2026-2027 For Admission Contact - 04295 226000 | +91 89401 26000

Experience Type	Organization	From	To	Total Experience
Engineering	Bannari Amman Institute of Technology, Sathyamangalam	01.07.2013

Degree	Specialization	Institute	University	Year of Passing
B E	Mechanical Engineering	Thiagarajar College of Engineering Madurai	Anna University, Chennai	2011
M E	Manufacturing Engineering	GCT Coimbatore	Anna University, Chennai	2013
Ph.D	Surface Composites	Bannari Amman Institute of Technology	Anna University, Chennai	2022

S.No.	Subject Area
1	Manufacturing
2	CNC Programming

A. Tajdeen, M. Wasim Khan, K. Kamal Basha, E. Sakthivelmurugan,NeerajaKoppula C, “Experimental Investigation and Optimization of EDM Process Parameters on EN31 Steel Using Genetic Algorithm”, Volume 64, Part 1, Pages 821-827, https://doi.org/10.1016/j.matpr.2022.05.326.2022

Tajdeen, A, Megalingam, A, Sivanesh Prabhu, M, Wasim Khan, M, “Role of Tungsten Disulfide Particles on the Microstructure, Mechanical, and Tribological Behaviors of Friction Stir-Processed Magnesium-Based Composite”, Journal of Tribology, Vol. No.145, Issue No.1, 2023

Wasim Khan, M, Elayaperumal, A, Sivanesh Prabhu, M, Tajdeen, A, “Bioshells and Calcium-Based Composite Coating for Tribology Applications”, Composite and Composite Coatings: Mechanical and Tribology Aspects, Pages.243-250, 2022

Tajdeen, A, Kamal Basha, K, Roshan Shandres, C, Sandeeprajkumar, S, Saddam Hussain, S, Sanjay, R, “Wear and Mechanical Behaviour of Magnesium AZ31 Alloy Reinforced with MoS2through Friction Stir Processing for Aerospace Applications”, IOP Conference Series: Materials Science and Engineering, Vol. No.1059, Issue No.1, 2021

Tajdeen, A, Soundrapandian, E, Sakthivelmurugan, E, Nachimuthu, S, Dinesh, P, Praveenkumar, S, “Design and Automation of Shell Facing Machine”, Springer Proceedings in Materials, Vol. No.5, Pages.291-300, 2021

Vivekkumar, P, Soundrapandian, E, Tajdeen, A, Prashanth, T, “Experimental Study of Electrochemical Micromachining on Titanium (Ti–6Al–4V) Alloy”, Springer Proceedings in Materials, Vol. No.5, Pages.301-308, 2021

Tajdeen, A, Megalingam, A, “Optimization of Output Responses During EDM of AZ91 Magnesium Alloy Using Grey Relational Analysis and Topsis”, Archives of Metallurgy and Materials, Vol. No.66, Issue No.4, Pages.1105-1113, 2021

Soundrapandian, E, Tajdeen, A, Basha, K.K, Vivekkumar, P, “Machining of Metal Matrix Composite Using Abrasive Water Jet Machine”, Springer Proceedings in Materials, Vol. No.5, Pages.277-290, 2021

Sakthivelmurugan, E, Senthilkumar, G, Tajdeen, A, Manojkumar, S, “Application of Lean Six Sigma in Reducing the Material Consumption at Wards in a Selected Healthcare Unit”, Materials Today: Proceedings, Vol. No.45, Pages.8011-8016, 2021

Sakthivelmurugan, E, Senthilkumar, G, Tajdeen, A, “Foraging Behaviour Analysis of Swarm Robotics System Using Design of Experiments”, Materials Today: Proceedings, Vol. No.45, Pages.1170-1174, 2021

Tajdeen, A, Sakthivelmurugan, E, Wasim Khan, M, Praveen Kumar, S, Praveenkumar, M, Vidhyaa Prakash, S, “Optimization of Machining Parameters in Electric Discharge Machining of Magnesium and Aluminium by Taguchi Technique”, IOP Conference Series: Materials Science and Engineering, Vol. No.764, Issue No.1, 2020

Dinesh, D, Megalingam, A, Rajamurugan, G, Arundeep, M, Tajdeen, A, “Evaluation of Microstructure and Tribological Characterization of Friction Stir Processed Al 6063 / B4C+SiO2 Composites”, AIP Conference Proceedings, Vol. No.2128, 2019

Tajdeen A, Dr. Nachi Muthu “Experimental Analysis of Az91 Alloy Material With Reinforcement of Mos2”, National Conference on “Emerging Trends In Engineering and Technology – ETET 2024”, NIT Puducherry, 2024.

Tajdeen A, “Experimental Analysis of AZ91 Alloy Material With Reinforcement of Mos2”, International Conference on “ICAMT 4.0”, BIT, 2023

Tajdeen A, “Drilling Characteristics of FSPED AZ91 Magnesium Based Metal Matrix Composites”, International Conference on “ICMEEP”, BIT, 2021.

A.Tajdeen, “Machinability study of Friction Stir Processed Mg AZ31 alloy for Aerospace Application “, International Conference On Reserach Advancements $ Challenges in Engineering Science (ICRACE’20), Velammal Institute of Technology, Chennai, March 2020.

A.Tajdeen, “Effect of Friction Stir Processing on Microstruture and Tensile strength of AZ31 Mg Alloy with MoS2 Reinforcement”, International Conference On Reserach Advancements $ Challenges in Engineering Science (ICRACE’20), Velammal Institute of Technology, Chennai, March 2020.

A.Tajdeen, “Mechanical and Wear behaviour of Friction stir Processed AZ31 MoS2 Composite for Aerospace Application “, International Conference On Reserach Advancements $ Challenges in Engineering Science (ICRACE’20), Velammal Institute of Technology, Chennai, March 2020.

Tajdeen.A, “Design and Automation od Sheel Facing Machine “, ICAMR-2019, Dept Of Mech Engg, BIT, Sathyamangalm, BIT, December 2019.

Tajdeen A, “Machining of Metal Matrix Composites using Abrasive Water Jet Machining “, ICAMR – 2019, Dept Of Mech Engg, BIT, Sathyamangalm, December 2019.

Tajdeen.A, “Experimental Study of Electrochemical Micro Machining of Titanium Alloy “, ICAMR-2019, Dept Of Mech Engg, BIT, Sathyamangalm, December 2019.

A.Tajdeen, E.Sakthivel Murugan, “optimization of Machining in EDM of Mg and Al by Taguchi Technique “, nternational Conference on Advances in Materials Processing and Characterization, ICAMPC 2019, BIT, September 2019.

A.Tajdeen , “Experimental Investigation of Machining parameters On Copper, Magnesium alloys, Aluminium alloys using CNC machining Operation “, 3rd national conference on Technologies for green mobility, BIT, Department of Automobile Engineering , March 2019.

Selvakumar.B, Tajdeen.A, “Optimizing the Process Parameters of EDM on Magnesium Alloys Using Taguchi Technique”, 3rd National Conference on Technologies for Green Mobility, BIT, Department of Automobile Engineering, March 2019.

Tajdeen A, “Experimental investigation of machining parametrs of Cu,Al, Mg alloys using milling operation “, Electronika – 2K19, Aiswarya college of Engg And Technology, Erode, March 2019.

D.Dinesh, Megalingam, G.Rajamurugan, M.Arundeep, A.Tajdeen, “Evaluation of Microstructure and Tribological Characterization of Friction Stir Processed Al6063 / B4C SiO2 Composites,”, ICMMM 2019, Department of Mechanical Engineering, BIT, March 2019.

D.Dinesh,A.Megalingam, A.Tajdeen, “Evaluation of Microstructure and Tribological Characterization of friction stir processed AL6063 /B4c SIO2 Composites”, ICMMM -2019, Bannari Amman Institute of Technology, Sathyamangalam, March 2019.

Tajdeen A, Wasim Khan, “Energy Study of AZ31 Alloys During turning operation “, National Conference on Energy, Ecology and Environment (NCEEE-2018), BIT, Sathyamangalam, August 2018.

E.Soundrapandian, G.Senthilkumar, A.Tajdeen, P.Vivekkumar, “Experimental Investigation on Properties of Component Prepared by Selective Laser Sintering (SLS) Process”, International Conference on Recent Trends in Engineering and Science, Confer Professional Group of Conference, Andhra Pradesh , February 2018.

K.B.Prakash, A.Tajdeen , E.Soundrapandian and P.Vivekkumar, “Effects of Performance and Emission Characteristics of Four Stroke Diesel Engine by Blending Biodiesel Produced From Coconut Oil with Diesel”, Recent Advances in Engineering and Technologies , Department of Mechanical Engineering, Sri Krishna College of Engineering and Technology , December 2017.

A.Tajdeen, A.Megalingam,D.Dinesh and Ajay Chari , “Effect of Different Tools on Drilling of AZ31 Alloy using Taguchi Technique”, 10th International Conference on Precision, Meso, Micro and Nano Engineering., Manufacturing Engineering Section, Department of Mechanical Engineering, IIT, Madras , December 2017.

E.Soundrapandian,A.Tajdeen, K.Kamal basha and Ajay chari, “Experimental Study of Electrochemical Micro Machining on Titanium (Ti-6Al-4V) Alloy”, 10th International Conference on Precision, Meso, Micro and Nano Engineering., Manufacturing Engineering Section, Department of Mechanical Engineering, IIT, Madras , December 2017.

A.Megalingam, A.Tajdeen, K.Arulvignesh and G.Dinesh , “Parameters Optimization and Effect of Tool Impact on Magnesium Alloy (AZ31) in CNC Turning “, 17th ISME Conference on Advances in Mechanical Engineering , Department of Mechanical Engineering, IIT Delhi , October 2015.

A.Tajdeen, A.Megalingam and Deepasuthan, “Optimization of Machining Parameters in Drilling Operation of Magnesium Alloys using Taguchi Method “, Advances in Technologies and Science , Department of Mechanical Engineering, INFO Institute of Engineering, April 2015.

A.Tajdeen and V.sritharan , “Optimization of Surface Roughness of EN24 Steel in Turning Operation using Genetic Algoritham “, Recent Trends in Mechanical Engineering , Department of Mechanical Engineering, SSM Engineering College Komarapalayam, April 2013.

S.No.	Title	Date	Reg. No.	Status	Level	Funding Agency
1	INTEGRATED TEA MAKER AND BREAD TOSTER DEVICE	06.09.2024	429908001	Filed	International	Self
2	MULTI WORKOUT EQUIPMENT	07.06.2023	379802-001	Filed	National	Self
3	FIBER REINFORCED SELF CURING CONCRETE PIPES	13.05.2022	202241027619	Filed	National	Self

S.No.	Topic	Program	Venue	Date
1	Perspective Projection, Parallel Projection and Drawing Standards	One Day Workshop on Practice on Engineering Graphics- Hands on Training	Mechanical Seminar Hall	28.09.2016