Mechatronics Publications - Bannari Amman Institute of Technology

S.No	Publication Details
1	M NANDAGOPAL, K SIVAKUMAR, M SENGOTTUVELAN , "Process parameter optimization to reduce cold metal defect in ferrous casting using Taguchi technique and regression analysis " , Materials Today: Proceedings , Vol. 45 , Materials Today: Proceedings , No. 9 , pages 7917 - 7921 , JUN 2021
2	S. K. Dhinesh, K. L. Senthil Kumar, K.S. Prasad, M. Raghunath,S. Madheshwaran, A. P. Gokulraj, Saravanan M , "Design And Fabrication Of Arduino Controlled CNC Foam Cutting Machine" , International Journal of Aquatic Science , Vol. 12 , International Journal of Aquatic Science , No. 3 , pages 1545 - 1557 , AUG 2021
3	A.B. Jai Krishnamoorthi, K. L. Senthil Kumar, S. K. Dhinesh, A. Megalingam , "Development Of Portable Multipurpose Computer Numerical Controlled Machine" , International Journal of Aquatic Science , Vol. 12 , International Journal of Aquatic Science , No. 3 , pages 1536 - 1544 , AUG 2021
4	Dhinesh S K, Senthil Kumar K L, Megalingam A, Gokulraj A P , " Design and fabrication of low-cost micromachining system for prototyping printed circuit boards " , Journal of Engineering Research , Vol. , Journal of Engineering Research , No. Special Issue , pages 1 - 15 , NOV 2021
5	Kalavathi G K, Vasundhara M G, Pradeesh E L, Prakash H R , "NUMERICAL SIMULATION OF ELECTROMECHANICAL SHAPE MEMORY ALLOY BASED TUNABLE VIBRATION PZT ENERGY HARVESTER WITHOUT TIP MASS " , Journal of Huazhong University of Science and Technolog , Vol. 50 , Journal of Huazhong University of Science and Technolog , No. 6 , pages - , SEP 2021
6	E. L. Pradeesh, S. Udhayakumar, M. G. Vasundhara , "Design and development of frequency tuneable vibration based piezoelectric energy harvester" , Ferroelectrics , Vol. 584 , Ferroelectrics , No. 1 , pages - , DEC 2021
7	B Siddharthan , R Rajiev , S Saravanan , "Effect of Silicon Carbide in Mechanical Properties of Aluminium Alloy Based Metal Matrix Composites" , IOP Conference Series: Materials Science and Engineering , Vol. 01 , IOP Conference Series: Materials Science and Engineering , No. 764 , pages 1 - 8 , MAR 2020
8	D Rajith Karna , R Rajiev , S Saravanan , "Product design and development of googles and hand stick for blind people" , IOP Conf. Series: Materials Science and Engineering , Vol. 01 , IOP Conf. Series: Materials Science and Engineering , No. 764 , pages 1 - 8 , MAR 2020
9	S. Deepankumar, K. L. Senthil Kumar, L. S. Gokul , B. Saravanan , "The Result of Nano-Additives in Diesel Engine using Diesel-E Waste Plastics Pyrolysis Oil Fuel Blends: A Review" , Materials Science and Engineering , Vol. 764 , Materials Science and Engineering , No. 1 , pages 1 - 10 , MAR 2020
10	S K Dhinesh and K L Senthil Kumar , "A Review on 3D Printed Sensors" , IOP Conference Series: Materials Science and Engineering , Vol. 764 , IOP Conference Series: Materials Science and Engineering , No. 012055 , pages 1 - 7 , MAR 2020
11	B Siddharthan, R Rajiev, S Saravanan and T K Naveen , "Effect of Silicon Carbide in Mechanical Properties of Aluminium Alloy Based Metal Matrix Composites" , IOP Conference Series: Materials Science and Engineering , Vol. 764 , IOP Conference Series: Materials Science and Engineering , No. In press , pages - , MAR 2020
12	P Tamilarasu, J Jones Praveen , B Siddharthan , U Vivek and M Giridharan , "Enhancing the material properties of EN24 pinion material by heat treatment process" , IOP Conference Series: Materials Science and Engineering , Vol. 764 , IOP Conference Series: Materials Science and Engineering , No. In Press , pages - , MAR 2020
13	R.S. Karrthik, S.Raghavendra Prabhu, K.K.Megavarthini, K.Nandakumar, B.Mathesh , "Modelization of elevator control system " , IOP Conference Series: Materials Science and Engineering , Vol. 764 , IOP Conference Series: Materials Science and Engineering , No. , pages - , MAR 2020
14	K.Poomani and S.Sathiyavathi , "Performance of current cycle ILC for Magnetic Levitation System" , International Journal of Scientific and Technology Research , Vol. 9 , International Journal of Scientific and Technology Research , No. 3 , pages 3058 - 3060 , MAR 2020
15	R. Yasodharan, A.P. Senthilkumar, P. Mohan kumar, J. Ajayan, R. Sivabalakrishnan , "Investigation and Influence of layer composition of tandem perovskite solar cells for applications in future renewable and Sustainable energy" , Optik , Vol. , Optik , No. 2020 , pages - , APR 2020
16	Dhinesh S.K., Arun Prakash S., Senthil Kumar K.L., Megalingam A. , "Study on flexural and tensile behavior of PLA, ABS and PLA-ABS materials" , Elsevier Materials Today Proceedings , Vol. 1 , Elsevier Materials Today Proceedings , No. 1 , pages 1 - 6 , APR 2020
17	K.Yuvaraj , S.Vigneshwaran , "Investigation of Spot Welding and Roller Hemming by Robots" , Materials Today Proceedings , Vol. NA , Materials Today Proceedings , No. NA , pages - , APR 2020
18	V.Vadivel Vivek, N.Natarajan, S.Raghavendra Prabhu, K.L.Senthil Kumar, R.S.Karrthik , "Prediction of mechanical characteristics of Wrightia tinctoria fiber reinforced iso-polyester resin composites" , Materials Today Proceedings , Vol. 03 , Materials Today Proceedings , No. 27 , pages - , APR 2020
19	S. Vigneshwaran , K Yuvaraj , "Fabrication and performance evaluation of Semi-Autonomous Oil Spills Removing Robot" , Materials Today: Proceedings , Vol. , Materials Today: Proceedings , No. 2 , pages - , JUN 2020
20	Boopathiraja K.P., Ramamoorthi R., Vadivel Vivek V., Vickram K., Vinodh Kumar S., Yuvaraj K.P. , "Characterization and surface modification on composites by friction stir processing - A review" , Materials Today Proceedings , Vol. 03 , Materials Today Proceedings , No. 27 , pages - , APR 2020
21	Sivabalakrishnan R, Kalaiarasan A, Ajithvishva M, Hemsri M, G.M.Oorappan, Yasodharan R , "IoT visualization of Smart Factory for Additive Manufacturing System (ISFAMS) with visual inspection and material handling processes" , IOP Conference Series: Materials Science and Engineering , Vol. 995 , IOP Conference Series: Materials Science and Engineering , No. 2020 , pages 1 - 12 , DEC 2020
22	K Nandakumar, S R Surya, K Karthick, N Raviraj, B Cheran,V Poovizhi, S Gokul, C Nimisha , "Autonomous Vehicle for Drug Delivery" , IOP Conference Series: Materials Science and Engineering , Vol. , IOP Conference Series: Materials Science and Engineering , No. 2020 , pages - , DEC 2020
23	K Yuvaraj, G M Oorappan, K K Megavarthini, M C Pravin, R Adharsh and M Ashwath Kumaran , "Design And Development Of An Application For Database Maintenance In Inventory Management System Using Tkinter And Sqlite Platform " , IOP Conference Series: Materials Science and Engineering , Vol. 995 , IOP Conference Series: Materials Science and Engineering , No. 1 , pages 1 - 16 , DEC 2020
24	E.L.Pradeesh, S.Udhayakumar, M.G.Vasundhara, V.Vadivel Vivek , "Vibration Based Piezoelectric Energy Harvesting - A Review" , IOP Conference Series: Materials Science and Engineering , Vol. 995 , IOP Conference Series: Materials Science and Engineering , No. 012007 , pages 1 - 11 , DEC 2020
25	V Vadivel Vivek, E L Pradeesh, N Natarajan, M C Pravin, S Raghavendra Prabhu , "Development of a system to assist in library to automate the book handling process" , IOP Conference Series: Materials Science and Engineering , Vol. 995 , IOP Conference Series: Materials Science and Engineering , No. 012018 , pages 1 - 7 , DEC 2020
26	G M Oorappan A Jeevanandham R Sivabalakrishnan S. Sudhahar , "Design and Fabrication of Step Feeder automation Machine for the Automobile Steering Ball joints" , IOP Conference Series: Materials Science and Engineering , Vol. 995 , IOP Conference Series: Materials Science and Engineering , No. 1 , pages 1 - 10 , DEC 2020
27	Pravin M C, Mukilan M, Vishnu Prakash G, Nithish P, Monish Kanna B, Logesh E , "Predicting the Emissive Characteristics of an IC Engine Using DNN" , IOP Conference Series: Materials Science and Engineering , Vol. , IOP Conference Series: Materials Science and Engineering , No. 1 , pages - , DEC 2020
28	Hanumanth Ramji K S, Vinoth Kumar J and Amarkarthick A , "Experimental Investigation of Automobile radiator using tungsten trioxide nano fluid" , conference series : material science and engineering , Vol. , conference series : material science and engineering , No. 995 , pages - , DEC 2020
29	Thiyagu S., Naveen T.K., Siddharthan B. and Manirathnam A.S. , "Numerical Investigation and Performance enhancement of 210 MW boiler by utilization of waste heat in flue gas" , Materials Today : Proceedings , Vol. 33 , Materials Today : Proceedings , No. 1 , pages 756 - 762 , JUL 2020
30	A megalingam, K.S.Hanumanth Ramji , "A complete single asperity-based satistical gaussian rough surface contact model" , Journal of Bio and tribo corrosion , Vol. , Journal of Bio and tribo corrosion , No. 6 , pages - , OCT 2020
31	S P Sriram , M Veera Sivakumar , P V Rithika Shree , K Nagavarshini and K Poomani , "Implementation of Cardamom Sorting Machine " , IOP Conference Series: Materials Science and Engineering , Vol. 995 , IOP Conference Series: Materials Science and Engineering , No. , pages - , DEC 2020
32	Sivabalakrishnan R., Dineshkumar M., Sharon B.P., Naveenkumar P., Vignesh S. , "Design and Fabrication of 3D-Printed Acrylonitrile Butadiene Styrene (ABS) Dam Automation Structure with Integrated Flood Monitoring System Using Data Analysis and Computation Techniques" , Advances in Materials Research. Springer Proceedings in Materials , Vol. 5 , Advances in Materials Research. Springer Proceedings in Materials , No. 2021 , pages 137 - 145 , FEB 2020
33	M NANDAGOPAL, K SIVAKUMAR, M SENGOTTUVELAN, S VELMURUGAN , "Optimization of Process Parameters to ReduceÂ Sand Casting Defects" , Advances in Materials Research , Vol. 5 , Advances in Materials Research , No. Springer proceeding , pages 655 - 661 , FEB 2020
34	S.M. Praveen, B. Saravanan, B. Siddharthan, S.B. Kumaragurubaran , "Thermal management in conventional diesel engines " , Materials Today: Proceedings , Vol. , Materials Today: Proceedings , No. https://doi.org/10.1016/j.matpr.2020.03.531 , pages - , APR 2020
35	S. VIGNESH, D. SARAVANAN, P. DINESH BABU, S. PAUL JOSHUA , "AN EVALUATION OF OPTIMAL PROCESS PARAMETERS OF LASER SURFACE MELTING OF AA-2024 ALLOY USING ELITIST NON-DOMINATED SORTING GENETIC ALGORITHM (NSGA-II)" , International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) , Vol. 08 , International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) , No. Special Issue 7 , pages 1536 - 1542 , JAN 2019
36	Sundararaj Raghavendra Prabhu , Mani Ilangkumaran , "Selection of 3D printer based on FAHP integrated with GRA-TOPSIS " , International Journal for Materials and Product Technology , Vol. 58 , International Journal for Materials and Product Technology , No. 2 , pages 155 - 177 , JAN 2019
37	Sivabalakrishnan R. , "Design and development of wireless controlled Electro-Pneumatic operated mobile crane system for material handling process " , International Journal of Mechanical and Production Engineering Research and Development , Vol. 9 , International Journal of Mechanical and Production Engineering Research and Development , No. 1 , pages 184 - 193 , JAN 2019
38	Sivabalakrishnan R. , "Analysis and simulation of automatic change over system in vehicle headlights for prevention of road accidents" , International Journal of Mechanical and Production Engineering Research and Development , Vol. 9 , International Journal of Mechanical and Production Engineering Research and Development , No. 1 , pages 136 - 140 , JAN 2019
39	S. VIGNESH, R. SIVABALAKRISHNAN, K. P. ARULSHRI, A. P. SENTHIL KUMAR , "ANALYSIS AND SIMULATION OF AUTOMATIC CHANGE OVER SYSTEM IN VEHICLE HEADLIGHTS FOR PREVENTION OF ROAD ACCIDENTS" , International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) , Vol. 09 , International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) , No. 01 , pages 136 - 140 , JAN 2019
40	S. VIGNESH, N. KARTHICK , "DEVELOPMENT OF SAFE AND ECONOMICAL FIRE DETECTION SYSTEM FOR PREVENTING ACCIDENTS AND ENSURING SECURITY WITH THE HELP OF AUTOMATED ALERT APPROACH" , International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) , Vol. 09 , International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) , No. 01 , pages 117 - 122 , JAN 2019
41	K.Yuvaraj, M.Balasubramaniam, K.Boopathi Raja, P.Dinesh Kumar , "Design and Developement of prototype for inbuilt weighing machine" , International Journal of Mechanical and Production Engineering Research and Development , Vol. 9 , International Journal of Mechanical and Production Engineering Research and Development , No. 1 , pages 130 - 135 , JAN 2019
42	D Yuvaraj and T Ramesh Kumar , "CFD ANALYSIS OF FLOW AND THERMAL BEHAVIOUR OF CI ENGINE" , International Journal of Mechanical and Production Engineering Research and Development , Vol. 9 , International Journal of Mechanical and Production Engineering Research and Development , No. 1 , pages 299 - 308 , JAN 2019
43	R. Sivabalakrishnan, S. Vignesh, A. P. Senthil Kumar , "Modelling of automatic vehicle headlight changeover (orientation and leveling) system for road safety applications" , International Journal of Mechanical and Production Engineering Research and Development , Vol. 8 , International Journal of Mechanical and Production Engineering Research and Development , No. 7 , pages 1468 - 1471 , JAN 2019
44	B A Saravanan, K L Senthil Kumar and N Sellappan , "Optimization of CR of diesel engine to reduce its effect on environment" , Indian Journal of Environmental Protection , Vol. 39 , Indian Journal of Environmental Protection , No. 2 , pages 145 - 151 , FEB 2019
45	A. Thirumoorthy, T.V. Arjunan and K.L. Senthil Kumar , "Experimental investigation on mechanical properties of reinforced Al6061 composites and its prediction using KNN-ALO algorithms " , International Journal of Rapid Manufacturing , Vol. 8 , International Journal of Rapid Manufacturing , No. 3 , pages 161 - 177 , MAR 2019
46	S.K.Dhinesh, R.Parameshwaran, S.Praveen Kumar , "Influence of High Voltage on Heat Transfer Performance in Automobile Radiators" , International Journal of Innovative Technology and Exploring Engineering , Vol. Volume - 8 , International Journal of Innovative Technology and Exploring Engineering , No. Issue-2S2 , pages 111 - 114 , APR 2019
47	Srisaran Venkatachalam, Djamila Hourlier , "Heat treatment of commercial Polydimethylsiloxane PDMS precursors: Part I. Towards conversion of patternable soft gels into hard ceramics" , Ceramics International , Vol. 45 , Ceramics International , No. 5 , pages - , APR 2019
48	Deepak B. Thimiri Govinda Raj, Niamat Ali Khan, Srisaran Venkatachalam, Sivakumar Arumugam , "BacMam System for Rapid Recombinant Protein Expression in Mammalian Cells" , Methods in molecular biology (Clifton, N.J.) , Vol. , Methods in molecular biology (Clifton, N.J.) , No. 10.1007/7651_2019_249 , pages - , JUN 2019
49	Deepak B. Thimiri Govinda Raj,Niamat Ali Khan, Srisaran Venkatachalam, Dinh Toi Chu , "Step-by-Step Protocol for Superparamagnetic Nanoparticle-Based Plasma Membrane Isolation from Eukaryotic Cell" , Methods in Molecular Biology , Vol. , Methods in Molecular Biology , No. 10.1007/7651_2019_211 , pages - , FEB 2019
50	Deepak B. Thimiri Govinda Raj, Niamat Ali Khan, Srisaran Venkatachalam, Dinh Toi Chu, Sivakumar Arumugam , "Step-by-Step Protocol for Superparamagnetic Nanoparticle-Based Endosome and Lysosome Isolation from Eukaryotic Cell " , Methods in Molecular Biology , Vol. , Methods in Molecular Biology , No. 10.1007/7651_2019_212 , pages - , FEB 2019
51	K K Megavarthini, S Vignesh, S Paul Joshua, A P Gokulraj, V Indirakumar , "Design and Implementation of Alert System for Monitoring the Ambient Temperature Using Cloud Computing In Hospital Regions " , International Journal of Recent Technology and Engineering (IJRTE) , Vol. 07 , International Journal of Recent Technology and Engineering (IJRTE) , No. 4S , pages 420 - 422 , JAN 2019
52	K. P. ARULSHRI, S. VIGNESH, H. R. DEVANAND, R. ELANGOVAN , "Design and fabrication of automated trolley with an ultrasonic sensor in order to enhance the comfort of travelers" , International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) , Vol. 08 , International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) , No. 07 , pages 767 - 774 , JAN 2019
53	S. VIGNESH, K. K. MEGAVARTHINI, V. INDIRAKUMAR, J. SOWNDHARPRAKASH, S. DHINESH , "DEVELOPMENT OF SECURITY ENABLED THEFT DETECTION AND ALERT SYSTEM FOR BANKS AND SHOPPING MALLS" , International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) , Vol. 08 , International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) , No. 07 , pages 1472 - 1475 , JAN 2019
54	S. VIGNESH, AKASH C. NARAYAN, K. P. ARULSHRI , "Design, development and analysis of wall climbing robot based on permanent magnetic adsorption with higher flexibility for hull surfaces" , International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) , Vol. 08 , International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) , No. 07 , pages 1033 - 1038 , JAN 2019
55	R.S.Karrthik , "Cylinder pressure and heat release rate analysis for hydrogen induction with injected biodiesel operated CI engine" , AIP Conference Proceedings , Vol. 1 , AIP Conference Proceedings , No. 1 , pages 1 - 11 , JUL 2019
56	Srisaran Venkatachalam, S. Baskaran, R. S. Karrthik, Deepak B. Thimiri Govinda Raj, and T. Ramesh Kumar , "Titanium diboride reinforced aluminum composite as a robust material for automobile applications" , AIP Conference Proceedings , Vol. 2128 , AIP Conference Proceedings , No. 1 , pages - , JUL 2019
57	K.P Anoop Shankar, K Muthukumar, R.Rajiev , "CFD simulation analysis and experimental study on multilobe hydrodynamic journal bearing" , AIP Conference Proceedings , Vol. 2128 , AIP Conference Proceedings , No. 10.1063/1.5117979 , pages - , JUL 2019
58	K. Muthukumar, S. Janardhan, R.Rajiev , "A study on work place health and safety aspects in manufacturing industry" , AIP Journals , Vol. 2128 , AIP Journals , No. 1 , pages 1 - 13 , JUL 2019
59	K.P Anoop Shankar, K Muthukumar, R.Rajiev , "CFD simulation analysis and experimental study on multilobe hydrodynamic journal bearing" , International Journal AIP Conference proceedings , Vol. 2128 , International Journal AIP Conference proceedings , No. 050007 , pages - , JUL 2019
60	Karrthik R.S, Raghunath.M, Baskaran.S , "Development of intelligent model to predict the characteristics of biodiesel operated CI engine with hydrogen injection " , Advances in Computational Design , Vol. 4 , Advances in Computational Design , No. 4 , pages 367 - 379 , OCT 2019
61	A. Megalingam, M. Kumar*, B. Sriram, K. Jeevanantham, P. Ram Vishnu , "Borassus fruit fiber reinforced composite: A review " , Materials Today: Proceedings , Vol. 24 , Materials Today: Proceedings , No. 1 , pages 1 - 7 , DEC 2019
62	Kailainathan S , R Muralikannan, K Nijandhan and Srisaran Venkatachalam , "High-strength hybrid particulate-fibre polymer composites: The role of process temperature on the mechanical strength " , Materials Research Express , Vol. , Materials Research Express , No. 6 , pages 1 - 10 , NOV 2019
63	C. Boopathi, N. Natarajan, R. K. Sanjeev, V. Meganathan, and P. Kavin , "Influence of red mud particles on thermomechanical behaviour of areca fiber reinforced polymer composites" , AIP Conference Proceedings , Vol. , AIP Conference Proceedings , No. 20 , pages - , JUL 2019
64	C. Veera Ajay, C. Boopathi, and P. Kavin , "Incremental sheet metal forming (ISMF): A literature review" , AIP Conference Proceedings , Vol. , AIP Conference Proceedings , No. 20 , pages - , JUL 2019
65	C.T.Justus Panicker, C.Veera ajay, C.Boopathi, R.Vivekanandan , "Comparing the Geometrical Accuracy of a 3D Printed Pattern to a Metal Pattern" , Materials Science and Engineering , Vol. , Materials Science and Engineering , No. 561 , pages - , NOV 2019
66	T Ramesh Kumar, T Guruprakash, P Nandha Kumar, R Gokul , "Study on Surface Roughness and Material Removal Rate (MRR) of Aluminium 2024 in Electrical Discharge Machining" , International Journal of Engineering Applied Sciences and Technology , Vol. 4 , International Journal of Engineering Applied Sciences and Technology , No. 7 , pages 144 - 148 , NOV 2019
67	B. Siddharthan , V. Bala Yogesh, M. Mani Bharathi, A. Chandresh , "Experimental Investigation of Tribological Behaviour of Aluminium Alloy Based Metal Matrix Composites" , Bulletin of Scientific Research , Vol. 1 , Bulletin of Scientific Research , No. 1 , pages 10 - 16 , MAY 2019
68	S Vignesh, P Dinesh Babu, G Surya, S Dinesh, P Marimuthu , " Development of mathematical models and optimization of the process parameters of laser surface hardened EN25 steel using elitist non-dominated sorting genetic algorithm" , IOP Conference Series: Materials Science and Engineering (SCOPUS) , Vol. 310 , IOP Conference Series: Materials Science and Engineering (SCOPUS) , No. 01 , pages 1 - 9 , MAR 2018
69	S.Vigneshwaran, T.S.Gokul, M.Praveenkumar, M.Rahul , "Design and Development of Flexible Shrub Cutting Machine" , International Journal for Scientific research and Developement , Vol. 6 , International Journal for Scientific research and Developement , No. 1 , pages 216 - 218 , MAR 2018
70	S. Vigneshwaran, P. T. Kavin Kannan, S. Madhu Meena , "Development of Mobile Robotic Arm for Object Identification and Retrieval Interfaced with IoT" , International Journal for Scientific research and Developement , Vol. 6 , International Journal for Scientific research and Developement , No. 1 , pages 199 - 202 , MAR 2018
71	M.Kumar, A.Megalingam , "Tribological Characterization of Al6061/Alumina/ Graphite/ Redmud Hybrid Composite" , Particulate Science Technology (Science Citation Index Expanded) , Vol. 37 , Particulate Science Technology (Science Citation Index Expanded) , No. 3 , pages 261 - 274 , FEB 2018
72	Yuvaraj.K,M.Balasubramaniam, K.Boopathi Raja, P.Dinesh kumar , "Fabrication of prototype for inbuilt weighing machine in trucks" , International Journal for Scientific research and development , Vol. 6 , International Journal for Scientific research and development , No. 1 , pages 100 - 103 , MAR 2018
73	K.Yuvaraj, T.Arun Prathap, S.Iniyadinesh, M.Mohammed Azarudin , "Cocunut Husk removing Machine" , International Journal for Scientific research and development , Vol. 6 , International Journal for Scientific research and development , No. 1 , pages 104 - 106 , MAR 2018
74	M.Kannan, M.Madhan Kumar, R.Mohan Raj, A.Mohamed Ismail , "Fabrication of solar water Distillation System " , International Journal For Scientific Research , Vol. 6 , International Journal For Scientific Research , No. 1 , pages 539 - 540 , MAR 2018
75	G. M. Oorappan Mr. T. Rajesh N. Rahul P. Balaji M. Sridharan , "Automatic Public Water Alerting System and Theft Identification" , IJSRD - International Journal for Scientific Research , Vol. 6 , IJSRD - International Journal for Scientific Research , No. 1 , pages 110 - 112 , JAN 2018
76	S. Aravinth, V. Sugumaran , "Air Compressor Fault Diagnosis through statistical feature extraction and Random Committee Classifier" , Pakistan Journal of Bio-technology , Vol. 15 , Pakistan Journal of Bio-technology , No. , pages 111 - 114 , JAN 2018
77	Sivabalakrishnan R , "Design and Fabrication of Pedal Force Monitoring and Control In Bi-Cycle" , International Journal for Research in Applied Science , Vol. 6 , International Journal for Research in Applied Science , No. II , pages 2553 - 2556 , FEB 2018
78	P. Senthil Kumar, K. Sivakumar, R. Kanagarajan, S. Kuberan , "Adaptive Neuro Fuzzy Inference System control of active suspension system with actuator dynamics" , Journal of VibroEngineering , Vol. 1 , Journal of VibroEngineering , No. 20 , pages 541 - 549 , FEB 2018
79	Dinesh Babu P, Vignesh S, Vignesh M, Balamurugan C , "Enhancement of the wear resistance of Ti-6Al-4V alloy by picosecond laser surface micro texturing process" , Journal of Central South University (SCI-E and SCOPUS, Listed in AU Annexure) , Vol. 25 , Journal of Central South University (SCI-E and SCOPUS, Listed in AU Annexure) , No. 8 , pages 1836 - 1848 , AUG 2018
80	D.Aravinthan, A.Hariharan, S.K.Dhinesh , "Semi Automatic Ceiling Fan Cleaning System " , International Journal of Research in Engineering , Vol. 6 , International Journal of Research in Engineering , No. 2 , pages 65 - 71 , MAY 2018
81	Mr G Nareshbabu R. S. Nithinsaai S. Chandru M. Aravind , "Monitoring and Controlling of Water Discharge " , International Journal for Scientific Research , Vol. 6 , International Journal for Scientific Research , No. , pages - , JAN 2018
82	G. Nareshbabu R. Kalaiselvan S. Dhanabal V. Sivasubramanian , "Design and Implementation of Driver Alerting and Accident Recording System" , International Journal for Scientific Research , Vol. 6 , International Journal for Scientific Research , No. , pages - , JAN 2018
83	K. Mugunthan, P. Arunkumar, J. Nithya prabha, S. Aravinth , "Design and Manufacturing of Coconut Kernel Cutting Machine" , International Journal for Scientific Research and Development , Vol. 5 , International Journal for Scientific Research and Development , No. 12 , pages 844 - 846 , MAR 2018
84	Thirumoorthy A, Arjunan T V and Senthil Kumar K L , "Latest Research Development in Aluminum Matrix with Particulate Reinforcement Composites A Review" , Materials Today: Proceedings , Vol. 5 , Materials Today: Proceedings , No. 1 , pages 1657 - 1665 , 2018
85	Deenathayalan T, Megavarthini K K , "Design and Fabrication of Automated Natural Fertilizer and Dispensing in Hydrophonic Unit" , International Journal for Scientific Research and Developement (IJSRD). , Vol. 6 , International Journal for Scientific Research and Developement (IJSRD). , No. 1 , pages 67 - 69 , APR 2018
86	Senthil Kumar K L, Deepak N, Naveen Kumar V R and Nishanth A , "Design and fabrication of autonomous machine for removal of stones in agricultural field" , International Journal for Scientific Research and Development , Vol. 11 , International Journal for Scientific Research and Development , No. , pages 714 - 716 , JAN 2018
87	M. Gnansekaran K. Kaviprasanth U. K. Naveen Kumar K. M. Nithish Kumar , "Automatic Air Inflation System" , International Journal for Scientific Research and Development , Vol. 6 , International Journal for Scientific Research and Development , No. 1 , pages 2278 - 2283 , APR 2018
88	K Nijandhan, R Muralikannan and S Venkatachalam , "Ricinus communis fiber as potential reinforcement for lightweight polymer composites" , Materials Research Express , Vol. 5 , Materials Research Express , No. 9 , pages 95307 - , AUG 2018
89	Nijandhan.K, Muralikannan.R,S Venkatachalam , "Ricinus communis fiber as potential reinforcement for lightweight polymer composites" , Materials Research Express , Vol. 5 , Materials Research Express , No. 9 , pages 95307 - , AUG 2018
90	S. Vignesh, P. Dinesh Babu, M. Nalla Mohamed, S. Martin Vinoth, G. Surya, S. Dinesh , "Investigation on the Process Parameters of Double-Sided Friction Stir Welded AA6082-T6 Joints with Different Tool Pins Using Response Surface Methodology" , Lecture Notes in Mechanical Engineering (SCOPUS) , Vol. , Lecture Notes in Mechanical Engineering (SCOPUS) , No. Chapter : Advances in Manufacturing Processes , pages 309 - 319 , SEP 2018
91	Sivabalakrishnan R. , "Development of Mathematical Models and Evaluation of the Optimal Process Parameters for Laser Surface Hardening of Low Alloy Steel Using Elitist Non-dominated Sorting Genetic Algorithm" , Lecture Notes in Mechanical Engineering (SCOPUS) , Vol. , Lecture Notes in Mechanical Engineering (SCOPUS) , No. Chapter : Advances in Manufacturing Processes , pages 583 - 590 , SEP 2018
92	Deepak B. Thimiri Govinda Raj, Prasanna Subramaniam, SriSaran Venkatachalam, Ding Toi Chu , "Bioelectronic Medicine: Technology targeting future medicine" , European Biopharmaceutical review , Vol. , European Biopharmaceutical review , No. , pages - , SEP 2018
93	Sengottuvelan M, Sivakumar K, Nandagopal M , "Casting defects and their causes impactsthe quality of Cast Products - A Review" , International Journal of Mechanical and Production Engineering Research and Development , Vol. 8 , International Journal of Mechanical and Production Engineering Research and Development , No. 7 , pages 27 - 38 , OCT 2018
94	K Nijadhan, R Muralikannan, Srisaran Venkatachalam, M Amarnath , "Effect of Alkali treatment on impact properties of natural fiber reinforced polyester composites " , International Journal of Mechanical and Production Engineering Research and Developmen , Vol. 8 , International Journal of Mechanical and Production Engineering Research and Developmen , No. 7 , pages 448 - 452 , OCT 2018
95	K. NIJANDHAN , R. MURALIKANNAN , S. VENKATACHALAM, M.AMARNATH , "EFFECT OF ALKALI TREATMENT ON IMPACT PROPERTIES OF NATURAL FIBER REINFORCED POLYESTER COMPOSITES " , International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) , Vol. Vol. 8 , International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) , No. Special Issue 7, Oct 2018 , pages 448 - 452 , OCT 2018
96	S. Vignesh, Akash C. Narayan, K. P. Arulshri , " Design, Development and Analysis of Wall Climbing Robot based on Permanent Magnetic Adsorption with Higher Flexibility for Hull Surfaces" , International Journal of Mechanical and Production Engineering Research and Development , Vol. 08 , International Journal of Mechanical and Production Engineering Research and Development , No. 07 , pages 1033 - 1038 , OCT 2018
97	K. P. Arulshri, S. Vignesh, H. R. Devanand, R. Elangovan, T. Saravanakannan , "Design and Fabrication of Automated Trolley With an Ultrasonic Sensor in Order to Enhance the Comfort of Travellers" , International Journal of Mechanical and Production Engineering Research and Development , Vol. 08 , International Journal of Mechanical and Production Engineering Research and Development , No. 07 , pages 767 - 774 , OCT 2018
98	Nijandhan. Kulandaivel, R. Muralikannan , "Extraction and Characterization of Novel Natural Cellulosic Fibers from Pigeon Pea Plant" , journal of natural fiber , Vol. , journal of natural fiber , No. , pages - , OCT 2018
99	K. NIJANDHAN , R. MURALIKANNAN , S. VENKATACHALAM , "EFFECT OF ALKALI TREATMENT ON IMPACT PROPERTIES OF NATURAL FIBER REINFORCED POLYESTER COMPOSITES" , International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) , Vol. 8 , International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) , No. Special Issue 7, , pages 448 - 452 , OCT 2018
100	Karrthik R S , "Applications and Future Scope of Robotics " , International Journal of Robotics and Autonomous Systems , Vol. 3 , International Journal of Robotics and Autonomous Systems , No. 1 , pages 12 - 26 , FEB 2018
101	A D Pradeep, T Ramesh Kumar, R Rajiev , "The Design and Analysis of Gasifier Suspension System for Installation in Seismic Zones" , International Journal of Mechanical and Production Engineering Research and Development , Vol. 8 , International Journal of Mechanical and Production Engineering Research and Development , No. 7 , pages 837 - 846 , OCT 2018
102	M.Kumar, G. Balaji , "Experimental Investigations on Friction and Wear Behavior and Parameters Optimization of Al7075-T6 Alloy And Al7075/Alumina/ Graphite/ Redmud Hybrid Metal Matrix Composite using Grey Relational Analysis " , International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) (Scopus Indexed) , Vol. 8 , International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) (Scopus Indexed) , No. 7 , pages 1104 - 1118 , OCT 2018
103	A. Tajdeen, A. Megalingam, M. Kumar , "Multi Response Optimization of Drilling Process Parameters of AZ 31 Magnesium Alloys using Gray Relational Analysis Technique " , International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) (Scopus Indexed) , Vol. 8 , International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) (Scopus Indexed) , No. 7 , pages 39 - 46 , OCT 2018
104	Suresh Babu B, Chandramohan G, Boopathi C, Pridhar T, Srinivasan R , "Production and characterization of mechanical and microstructural behaviour of friction stir welded Al6063 composites reinforced with Gr/B4C/SiC particles" , JOURNAL OF CERAMIC PROCESSING RESEARCH , Vol. 19 , JOURNAL OF CERAMIC PROCESSING RESEARCH , No. 1 , pages 69 - 74 , JAN 2018
105	K Kaviyarasan, T Pridhar, C Boopathi B Sureshbabu, , "Fabrication of Al6061-Al2 O3 composite through liquid metallurgy technique" , Materials Science and Engineering , Vol. 402 , Materials Science and Engineering , No. 1 , pages 1 - 7 , JUL 2018
106	M Wasim Khan, T Ramesh Kumar, A Tajdeen and S Vengatesan , "Automatic Baby Cradle Swing Machine Using Four Bar Mechanism" , EPRA International Journal of Research and Development , Vol. 3 , EPRA International Journal of Research and Development , No. 11 , pages 127 - 130 , NOV 2018
107	S. Vignesh, K. P. Arulshri, S. SyedSajith, S. Kathiresan, S. Boopathi, P. Dinesh Babu , " Design and development of ornithopter and experimental analysis of flapping rate under various operating conditions " , Materials Today : Proceedings , Vol. 05 , Materials Today : Proceedings , No. 11 , pages 25185 - 25194 , NOV 2018
108	Sengottuvelan M, Sivakumar K, Nandagopal M , "Study of Cold Metal Defect in Pump Mounting Flange using Taguchi Approach" , Materials Today:Proceedings , Vol. , Materials Today:Proceedings , No. 5 , pages 25212 - 25218 , DEC 2018
109	M.NANDAGOPAL,K. SIVAKUMAR,M. SENGOTTUVELAN , "The yield improvement of green sand castings based on the gating system parameters modification" , International Journal of Mechanical and Production Engineering Research and Development , Vol. 8 , International Journal of Mechanical and Production Engineering Research and Development , No. 7 , pages 617 - 628 , OCT 2018
110	Senthilkumar. P, Sivakumar. K, Kanagarajan.R, Kuberan. S , "Fuzzy control of active suspension system using full car model" , MECHANIKA. , Vol. 24 , MECHANIKA. , No. 2 , pages 240 - 247 , JUN 2018
111	Velmurugan S, Sivakumar K, Senthilkumar P , "An Algebraic Position Analysis and Impact of Accuracy on the Parametric Tolerances of a Planar Four Bar Linkage" , International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) , Vol. 8 , International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) , No. 7 , pages 738 - 750 , OCT 2018
112	S Baskaran, T Ramesh Kumar, R S Karrthik , "Applications and Future scope of Robotics-A Review " , International Journal of Robotics and Autonomous Systems , Vol. 3 , International Journal of Robotics and Autonomous Systems , No. 1 , pages - , JUN 2018
113	S Baskaran, T Ramesh Kumar, R S Karrthik , "Applications and Future scope of Robotics-A Review " , International Journal of Robotics and Autonomous Systems , Vol. 3 , International Journal of Robotics and Autonomous Systems , No. 1 , pages - , JUN 2018
114	R. Rajiev Dr. P. sadagopan , "Simulation and Analysis of hot forging dies for Pan Head bolt and insert component." , Journal of Materials Today: Proceedings , Vol. , Journal of Materials Today: Proceedings , No. 5 , pages - , JUN 2018
115	Vitala H R, B P Dileep, A.Megalingam, K Karthick , "Mechanical and Tribological Characterization Nitrided Al-7075/Al Metal Matrix Composites 2 O" , Periodicals of Engineering and Natural Scinces , Vol. 6 , Periodicals of Engineering and Natural Scinces , No. 2 , pages - , OCT 2018
116	Karrthik R S , "Artificial Vision for the Visually Impaired People " , International Journal for Science and Advance Research in Technology , Vol. 4 , International Journal for Science and Advance Research in Technology , No. 2 , pages 1 - 4 , FEB 2018
117	D Yuvaraj, T Ramesh Kumar, K S Hanumanthramji , "An analysis of the Flow and Thermal Behaviour Inside the Closed Container using CFD Technique" , International Journal of Mechanical and Production Engineering Research and Development , Vol. 8 , International Journal of Mechanical and Production Engineering Research and Development , No. 7 , pages 255 - 262 , OCT 2018
118	A. Thirumoorthy, T. V. Arjunan and K. L. Senthil Kumar , "Analysis of Aluminium based Hybrid Composite and Prediction of its Wear Rate using GA-ANN Approach" , Journal of the Chinese Society of Mechanical Engineers , Vol. 39 , Journal of the Chinese Society of Mechanical Engineers , No. No.6 , pages - , JUN 2018
119	OORAPPAN G. M, JEEVANANDHAM A, SRISARAN VENKATACHALAM , "AN AUTOMATIC FIRE EXTINGUISHER IN VEHICLES USING THERMOCABLE AND SPRAY PUMP ACTUATOR" , International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) , Vol. 8 , International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) , No. 7 , pages 1623 - 1629 , DEC 2018
120	S. VIGNESHWARAN,S. SARAVANAPERUMAAL , "GESTURE BASED ROBOT CONTROL USING KINECT SKELETAL IMAGES" , International Journal of Mechanical and Production Engineering Research and Development , Vol. Vol. 8 , International Journal of Mechanical and Production Engineering Research and Development , No. Special Issue 7, Dec 2018, 1668-1676 , pages 1668 - 1676 , DEC 2018
121	D. Yuvaraj, T. Ramesh Kumar and K S Hanumanth Ramji , "An Analysis of the Flow and Thermal Behaviour Inside the Closed Container Using CFD Technique" , International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) , Vol. , International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) , No. SPECIAL ISSUE 7 , pages 255 - 262 , OCT 2018
122	K Rajalashmi, S Vignesh, K.Senthilnathan , "Development of an Automated Side Lock System for Ensuring Safety and Security In Two Wheelers " , International Journal of Innovative Technology and Exploring Engineering , Vol. 8 , International Journal of Innovative Technology and Exploring Engineering , No. 2S2 , pages 96 - 98 , DEC 2018
123	K.Poomani and S.Sathiyavathi , "Performance enhancement of PID controller for Ball and Beam system" , , Vol. 14 , , No. 3 , pages 217 - 224 , AUG 2018
124	S.Vignesh, K.K.Megavarthini, V.Indirakumar, J.Sowndhar prakash , "The development of security enabled theft detection and alert system for banks and shopping malls" , International Journal of Production and Mechanical Engineering Research and Development (IJMPERD)) , Vol. 8 , International Journal of Production and Mechanical Engineering Research and Development (IJMPERD)) , No. Special Issue 7 , pages - , DEC 2018
125	K K Megavarthini, S Vignesh, S Paul Joshua, A P Gokulraj, V Indirakumar , "Design and Implementation of Alert System for Monitoring the Ambient Temperature Using Cloud Computing In Hospital Regions " , International Journal of Recent Technology and Engineering (IJRTE) , Vol. 7 , International Journal of Recent Technology and Engineering (IJRTE) , No. 4S , pages 420 - 422 , NOV 2018
126	K. M. Nithish Kumar , "Nanoparticles Added Biodiesel to Enhance the Performance of Diesel Engine" , International Journal for Research in Applied Science , Vol. 5 , International Journal for Research in Applied Science , No. XI , pages 740 - 746 , NOV 2017
127	Karrthick R S, Baskaran S , "Performance and Emission Characteristics of Biodiesel Fueled Hydrogen Addition Engine Using EGR Technique" , Journal of Energy and Environmental Sustainability , Vol. 4 , Journal of Energy and Environmental Sustainability , No. , pages 10 - 14 , NOV 2017
128	Baskaran S, Justin Dhiraviyam, Sathish.K , "Design and fabrication of two wheeler mudguard using sisal natural fiber" , International Journal of Mechanical Engineering , Vol. 4 , International Journal of Mechanical Engineering , No. 1 , pages 1 - 4 , JAN 2017
129	R. Mohamed Ayub, A. Mohanraj, S. Anand and K.Poomani , "PSO tuned PID Controller for Magnetic Ball Levitation System" , International Journal of Trend in Research and Development (IJTRD) , Vol. 1 , International Journal of Trend in Research and Development (IJTRD) , No. 1 , pages 19 - 21 , MAR 2017
130	R.Mukesh Kannan, P.Kishore, S.Rahul and K.Poomani , "Automatic Paint Spraying Machine using IR sensor " , International Journal of Trend in Research and Development (IJTRD) , Vol. 1 , International Journal of Trend in Research and Development (IJTRD) , No. 1 , pages 3 - 5 , MAR 2017
131	Karrthik R S , "POV Propeller Display based on Arduino with Bluetooth Control" , International Journal of Research and Development in Technology , Vol. 1 , International Journal of Research and Development in Technology , No. 1 , pages 217 - 224 , DEC 2017
132	Pavithran, Mahendran, Aravindan and K. L. Senthil Kumar , "Design and Fabrication of Automatic Matchstick Counting and Packing Machine" , CiiT International Journal of Automation and Autonomous System , Vol. 9 , CiiT International Journal of Automation and Autonomous System , No. 4 , pages 82 - 84 , APR 2017
133	S. Vignesh, P. Dinesh Babu, S. Martin Vinoth, V. Prasanna Venkatesh, P. Marimuthu , "Experimental investigation on the process parameters of Magnetically Impelled Arc Butt Welded T91 steel tubes" , Transactions of the Indian Institute of Metals (SCI-E and SCOPUS, Listed in AU Annexure) , Vol. 70 , Transactions of the Indian Institute of Metals (SCI-E and SCOPUS, Listed in AU Annexure) , No. 3 , pages 741 - 748 , MAR 2017
134	Karrthik R S, Baskaran S , "Performance and Emission Characteristics of Biodiesel Fueled Hydrogen Addition Engine Using EGR Technique" , Journal of Energy and Environmental Sustainability , Vol. 4 , Journal of Energy and Environmental Sustainability , No. , pages 1 - 9 , MAY 2017
135	, "Optimization of constrained layer damping parameters in beam using taguchi method" , , Vol. 3 , , No. 41 , pages 243 - 250 , SEP 2017
136	Nandagopal M, Sivakumar K, Senthilkumar G, Sengottuvelan M , "Study of Sand Casting Gating System" , International Journal of Recent Engineering Research and Development , Vol. 2 , International Journal of Recent Engineering Research and Development , No. 11 , pages 19 - 26 , NOV 2017
137	P.Prabhu and Dinesh C P.Karthikeyan, E.Mohanraj , "DESIGN AND ANALYSIS OF SOLAR POWER AUTOMATED GREEN HOUSE" , International Journal of Theoretical and Applied Mechanics , Vol. 12 , International Journal of Theoretical and Applied Mechanics , No. 4 , pages 821 - 827 , FEB 2017
138	T Ramesh kumar, K L Senthil Kumar, Mr.A Anandha Moorthy and A D Latha , "A Study on Mechanical Behaviours of Newly Developed Aluminium-Based Alloy" , International Journal of Intellectual Advancements and Research in Engineering Computations , Vol. 5 , International Journal of Intellectual Advancements and Research in Engineering Computations , No. 2 , pages 1991 - 1994 , MAY 2017
139	Venkatachalam, S., Ducournau, G., Lampin, J.-F., Hourlier, D. , "Net-shaped pyramidal carbon-based ceramic materials designed for terahertz absorbers" , Materials and Design , Vol. , Materials and Design , No. 120 , pages 1 - 9 , 2017
140	S.Venkatachalam, M.Depriester, A.Hadj Sahraoui, B.Capoen, M.R.Ammar, D.Hourlier , "Thermal conductivity of Kapton-derived carbon " , Carbon , Vol. , Carbon , No. 114 , pages 134 - 140 , 2017
141	D.Hourlier, S.Venkatachalam, M.R.Ammar, Y.Blum , "Pyrolytic conversion of organopolysiloxanes " , Journal of Analytical and Applied Pyrolysis , Vol. , Journal of Analytical and Applied Pyrolysis , No. 123 , pages 296 - 306 , 2017
142	R. Madhavan, S. Vigneshkumar, M. Dineshkumar , "Automatic corn seed sowing process by using mobile robot" , , Vol. 4 , , No. 7 , pages 9 - 12 , MAR 2017
143	V. Jayaprabhu, N. Kalaiselvan, R. Vignesh, M. Dineshkumar , "Detection and Suction of Toxic Gases in Mines using Autonomous Ground Vehicle" , International Journal of Advanced Research Trends in Engineering and Technology , Vol. 4 , International Journal of Advanced Research Trends in Engineering and Technology , No. 7 , pages 73 - 76 , MAR 2017
144	R.KANAGARAJAN,S.KUBERAN,P.SENTHILKUMAR , "Motion analysis of 4 axis robotic arm with inverse kinematics for industrial application" , International Journal of New Technologies in Science and Engineering , Vol. 4 , International Journal of New Technologies in Science and Engineering , No. 3 , pages 1 - 7 , MAR 2017
145	S. Aravinth, K. Rajesh Kanna, V. Sugumaran , " Air compressor fault diagnosis through vibration signals using statistical features and J48 algorithms" , Indian Journal of Science and Technology , Vol. 9(47) , Indian Journal of Science and Technology , No. , pages 1 - 6 , DEC 2016
146	K.Poomani and S.Sathiyavathi , "Enhanced Proportional Integral Derivative control strategy for Magnetic Ball Levitation System" , International Journal of Hybrid Information Technology , Vol. 9 , International Journal of Hybrid Information Technology , No. 6 , pages 295 - 302 , MAR 2016
147	N Santhosh , S Jegadheeswaran , A Amarkarthik, S Kaushik , "Performance of artificial neural network in prediction of heave displacement for non buoyant type wave energy converter " , IET Renewable Power Generation , Vol. 11 , IET Renewable Power Generation , No. 1 , pages 81 - 84 , 2016
148	abrasive water jet machining technology Sasikumar, K.S.K., Arulshri, K.P., Ponappa, K., Uthayakumar, M. , "A study on kerf characteristics of hybrid aluminium 7075 metal matrix composites machined using abrasive water jet machining technology" , Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture , Vol. 232 , Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture , No. 4 , pages 690 - 704 , MAR 2016
149	Kumar, M., Megalingam, A., and V.Baskaran , "Effect of sliding distance on dry sliding tribological behavior of Aluminium Hybrid Metal Matrix Composite (AlHMMC): an alternate for automobile brake rotor, A Grey relational approach" , Proc.IMechE Part J: J Engineering Tribology , Vol. 230 , Proc.IMechE Part J: J Engineering Tribology , No. 4 , pages 402 - 415 , APR 2016
150	Naveen Kumar, T., Megalingam, A., and M, Kalidass , "Experimental Analysis of Fracture Toughness of Sisal/Borassus Ployester fiber Reinforced Composite" , Advanced Science Letters , Vol. 22 , Advanced Science Letters , No. 1 , pages 60 - 63 , JUN 2016
151	Kumar, M., Balaji. G, Hanumanth Ramji, K.S and A, Megalingam Murugan , "Experimental Investigation on Tribological Behavior and Grey Relational Optimization of an Eco-friendly Automobile Brake Rotor Materials" , Asian Journal of Research in Social Sciences and Humanities , Vol. 6 , Asian Journal of Research in Social Sciences and Humanities , No. 8 , pages 2390 - 2401 , AUG 2016
152	, "Investigations on effect of process parameters of electrodeposited Ni-Al2O3 composite coating using orthogonal array approach and mathematical modeling" , Archives of Civil and Mechanical Engineering , Vol. 16 , Archives of Civil and Mechanical Engineering , No. 1 , pages 168 - 177 , JAN 2016
153	Jeyaraj, S., Arulshri, K.P., Sivasakthivel, P.S. , "Effects of process parameters on microhardness of electrodeposited Ni-Al composite coating using taguchi method" , Portugaliae Electrochimica Acta , Vol. 33 , Portugaliae Electrochimica Acta , No. 5 , pages 249 - 264 , DEC 2016
154	S. Aravinth, V. Sugumaran , "Fault diagnosis methods of air compressor: A Review " , International Journal of Control Theory and Applications , Vol. 9 , International Journal of Control Theory and Applications , No. , pages 211 - 223 , DEC 2016
155	S. Aravinth, R. Jegadeeshwaran and V. Sugumaran , "Vibration based Brake Fault Diagnosis using Voting Feature Interval and Decision Tree with Histogram Features " , Indian Journal of Science and Technology , Vol. 9(33) , Indian Journal of Science and Technology , No. , pages 1 - 5 , SEP 2016
156	S. Aravinth, V. Sugumaran , "Air Compressor Fault Diagnosis through Vibration Signals using Statistical Features and Logit Boost Algorithm" , International Journal of Control Theory and Applications , Vol. 9 , International Journal of Control Theory and Applications , No. , pages 383 - 392 , 2016
157	Sengottuvelan.M, Dr.Sivakumar.K, Nandagopal.M , "Identification and Analysis of Cold Metal Defect in Ferrous Casting Using TRIZ Integrated Six Sigma Approach" , Asian Journal of Research in Social Science and Humanities , Vol. 6 , Asian Journal of Research in Social Science and Humanities , No. 6 , pages 259 - 266 , JUN 2016
158	T Gangatharan, A Anandha Moorthy and T Ramesh Kumar , "Enhancing the Tribological Properties of Composite Materials for Centrifugal Pump Applications" , International Research Journal of Engineering and Technology (IRJET) , Vol. 3 , International Research Journal of Engineering and Technology (IRJET) , No. 3 , pages 195 - 199 , MAR 2016
159	S. Vignesh, P. Dineshbabu, G. Muthukumaran, S. Martin Vinoth and K. Sureshbabu , "Development of mathematical models and Optimization of the laser welding process parameters using Response Surface Methodology " , ARPN Journal of Engineering and Applied Sciences (SCOPUS) , Vol. 11 , ARPN Journal of Engineering and Applied Sciences (SCOPUS) , No. 12 , pages 7978 - 7983 , JUN 2016
160	S. Vignesh, P. Dineshbabu, C. Balamurugan, S. Martin Vinoth , "Comparison of the Optimized Process Parameters of Double-Sided Friction Stir Welded Aluminium Alloy Joints Using Statistical and Evolutionary Techniques" , Applied Mechanics and Materials (SCOPUS) , Vol. 852 , Applied Mechanics and Materials (SCOPUS) , No. , pages 317 - 323 , SEP 2016
161	Sivabalakrishnan R , "Optimized terrain Robot for Liberating the human in catastrophe" , International Journal for Research in applied science and Engineering Technology , Vol. 4 , International Journal for Research in applied science and Engineering Technology , No. III , pages 539 - 544 , MAR 2016
162	P. Senthilkumar, K.Sivakumar , "Fuzzy control of active suspension system " , Journal of VibroEngineering , Vol. 18 , Journal of VibroEngineering , No. 5 , pages 3197 - 3204 , AUG 2016
163	P. Senthilkumar, M.Rubi Sindhika, , "Fuzzy Logic Control of Hydraulic Actuated Active Suspension System" , International Journal of Mechanical , Vol. 16 , International Journal of Mechanical , No. 6 , pages 1 - 8 , 2016
164	Kumar M, Hanumanth Ramji A.Megalingam , "Experimental Investigation on Tribological Behavior and Grey relational Optimization of Ecofriendly brake Rotor materials " , Asian Journal of Research in Social Sciences and Humanities , Vol. 6 , Asian Journal of Research in Social Sciences and Humanities , No. 8 , pages 2390 - 2401 , AUG 2016
165	K.Poomani and R.Rameswari , "Enhanced Pid Control Strategy: Application To Spherical Tank System" , International Journal fo r Research in Applied Science , Vol. III , International Journal fo r Research in Applied Science , No. III , pages 138 - 141 , MAR 2015
166	Senthil Kumar, K. L. and Ramesh Kumar, T. , "An Integrated approach to optimize parameters in electrochemical machining process" , International Journal of Applied Engineering Research , Vol. 10 , International Journal of Applied Engineering Research , No. Special Issue , pages 8297 - 8306 , 2015
167	Ramesh Kumar, T., Senthil Kumar, K. L. and Senthilkumar G., , "Investigations on design and analysis of newly developed aluminium-based plain bearing materials for automotive applications " , International Journal of Applied Engineering Research , Vol. 10 , International Journal of Applied Engineering Research , No. 62 , pages 165 - 172 , 2015
168	Kumar, M., Megalingam, A., and V, Baskaran , "Dry Sliding Tribological Characterization and Parameters Optimization of Aluminium hybrid metal matrix composite for Automobile Brake Rotor Applications" , International Journal of Applied Engineering Research , Vol. 10 , International Journal of Applied Engineering Research , No. 24 , pages 21102 - 21109 , OCT 2015
169	C Dinesh, VV Manikanta, HS Rohini, KR Prabhu , "Real time level control of conical tank and comparison of fuzzy and classical PID controller" , Indian Journal of Science and Technology , Vol. 8 , Indian Journal of Science and Technology , No. S2 , pages 40 - 44 , JAN 2015
170	Jeyaraj, S., Arulshri, K.P., Sivasakthivel, P.S., (...), Saravanan, R., Muralidharan, G. , "Experimental investigations and effect studies on electrodeposited nickel-slag powder composite coatings" , Indian Journal of Science and Technology , Vol. 22 , Indian Journal of Science and Technology , No. 8 , pages 1 - 8 , DEC 2015
171	K L Senthil Kumar and T Ramesh Kumar , "An Integrated Approach To Optimize Parameters In Electrochemical Machining Process" , International Journal of Applied Engineering Research , Vol. 10 , International Journal of Applied Engineering Research , No. 3 , pages 8297 - 8306 , OCT 2015
172	J Praveen Rex, G Senthilkumar and T Ramesh Kumar , "Process Parameter Optimization of Sunflower Methyl Ester Yield Production using Response Surface Methodology" , Journal of Applied Engineering Research , Vol. 10 , Journal of Applied Engineering Research , No. 62 , pages 205 - 211 , OCT 2015
173	T Ramesh Kumar, K L Senthil Kumar and G Senthilkmar , "Investigations on Design and Analysis of Newly Developed Aluminium-Based Plain Bearing Materials for Automotive Applications " , Journal of Applied Engineering Research , Vol. 10 , Journal of Applied Engineering Research , No. 62 , pages 165 - 172 , OCT 2015
174	M.Kumar, A.Megalingam@murugan and K.S.Hanumanth Ramji , "Effect of Sliding Distance on dry sliding tribological behaviour of Aluminium Hybrid Metal Matrix Composite (ALHMMC): An alternative for automobile brake rotor - A Grey Relational approach " , Journal of Engineering Tribology , Vol. 230(4) , Journal of Engineering Tribology , No. , pages 402 - 415 , SEP 2015
175	Sivabalakrishnan R , "Trusted Routing with an Efficient Certificate Revocation for Mobile Ad Hoc Network" , International Journal of Innovative Science, Engineering , Vol. 2 , International Journal of Innovative Science, Engineering , No. 3 , pages 754 - 762 , MAR 2015
176	Santhosh Nagulan, Venkatesan Baskaran, Arunachalam Amarkarthik , "A Review on Front End Conversion in Ocean Wave Energy Converters" , Frontiers in Energy , Vol. 9 , Frontiers in Energy , No. 3 , pages - , OCT 2015
177	R Rajiev P Sadagopan , "Plastic deformation analysis of wear on insert component and die service life in hot forging process" , Indian Journal of Engineering , Vol. 22 , Indian Journal of Engineering , No. 12 , pages 686 - 692 , DEC 2015
178	Saravanakumar, M. and Senthil Kumar, K. L. , "An investigation of multi-walled carbon nano tubes based nano-cutting fluids in turning of martensitic stainless steel by using Taguchi and ANOVA analysis" , IOSR Journal of Mechanical and Civil Engineering , Vol. 7 , IOSR Journal of Mechanical and Civil Engineering , No. Special Issue , pages 8 - 15 , 2014
179	Megalingam, A., and M. M. Mayuram , "Effect of surface parameters on finite element method based deterministic Gaussian rough surface contact model" , Proc.IMechE Part J: J Engineering Tribology , Vol. 228 , Proc.IMechE Part J: J Engineering Tribology , No. 12 , pages 1358 - 1373 , MAY 2014
180	Venkatapathy, K., Arulshri, K.P., Saravanakumar, N. , "Investigation of cutting parameters for difficult-to-machine material" , International Journals of Engineering and Sciences Publisher , Vol. 22 , International Journals of Engineering and Sciences Publisher , No. 9 , pages 14365 - 14374 , AUG 2014
181	Boopathi, M.M, Arulshri, K.P, Iyandurai, N, Shanmughasundaram, P , "Dry sliding wear, co-efficient of friction and corrosion behaviour of aluminium alloy 2024 reinforced with silicon carbide and fly ash hybrid metal matrix composites" , International Journal of Mechanical and Mechatronics Engineering , Vol. 4 , International Journal of Mechanical and Mechatronics Engineering , No. 14 , pages 44 - 53 , DEC 2014
182	T Ramesh Kumar and I Rajendran , "Mass Loss Prediction of Newly Developed Aluminium-based Alloys using Artificial Neural Network" , Neural Network World , Vol. 24 , Neural Network World , No. 2 , pages 129 - 142 , FEB 2014
183	R. Rajiev and Dr.P.Sadagopan , "Analysis Of Wear On Pan Head Bolt Component And Die Service Life In Hot Forging Process" , International Journal of Applied Engineering Research , Vol. 9 , International Journal of Applied Engineering Research , No. 24 , pages 458 - 468 , NOV 2014
184	T Ramesh Kumar and I Rajendran , "Mechanical and Tribological Properties on Al-Sn-Si alloy Based Plain Bearing Material" , Tribology Transactions , Vol. 56 , Tribology Transactions , No. 2 , pages 268 - 274 , FEB 2013
185	P.Senthil kumar, R.Kalidas, K.Sivakumar , "Application of Taguchi Method for Optimizing Passenger-Friendly Vehicle Suspension System" , International Journal of Latest Trends in Engineering and Technology (IJLTET) , Vol. 2 , International Journal of Latest Trends in Engineering and Technology (IJLTET) , No. 1 , pages 1 - 8 , 2013
186	P.Senthil kumar, K.Sivakumar, R.Kalidas , "Simulation and Analysis of Vehicle Suspension System for Different Road Profile" , International Journal Of Innovative Research And Development , Vol. 2 , International Journal Of Innovative Research And Development , No. 2 , pages - , FEB 2013
187	R..Rajiev and Dr. P. Sadagopan , "WEAR ANALYSIS OF FORGING TOOLS, LIFE CYCLE - ARETROSPECTWE AND LITERATURE REVIEW" , National Technology Journal , Vol. 8 , National Technology Journal , No. 3 , pages 45 - 50 , SEP 2012
188	Senthil Kumar, K. L. and Sivasubramanian, R, , "Modeling of metal removal rate in machining of aluminium matrix composite using artificial neural network" , Journal of Composite Materials , Vol. 45 , Journal of Composite Materials , No. 22 , pages 2309 - 2316 , OCT 2011
189	T Ramesh Kumar, I Rajendran and A D Latha , "Investigation on the Mechanical and Tribological Properties of Aluminium-Tin Based Plain Bearing Material" , Tribology in Industry , Vol. 32 , Tribology in Industry , No. 2 , pages 3 - 10 , APR 2010
190	Senthil Kumar, K. L., Sivasubramanian, R and Kalaiselvan, K. , "Selection of optimum parameters in non conventional machining of metal matrix composite" , Portugaliae Electrochimica Acta , Vol. 27 , Portugaliae Electrochimica Acta , No. 4 , pages 477 - 486 , APR 2009
191	T Ramesh Kumar, I Rajendran and A D Latha , "Mechanical and Tribological properties of Aluminium-based Plain Bearing Material under Lubricated condition" , National Journal of Convergence in Engineering, Technology and Science , Vol. 1 , National Journal of Convergence in Engineering, Technology and Science , No. , pages 9 - 16 , DEC 2009