|
Santhosh N, Vinu Kumar S M, Sundar R, Vadivelvivek V & Dineshbabu C, ""Hybrid FEDformer-LSTM model for enhanced heave
displacement prediction in offshore buoys""Ocean Systems Engineering""
Volume 15, Number 3, September 2025 , PP. 271-295, DOI: https://doi.org/10.12989/ose.2025.15.3.271 |
|
Gomathy S, Boopathi Dhanasekaran, Sivabalakrishnan Ramasamy, Radha Jayaram, Sabarimuthu Muthusamy, Sankara Subramanian
A T,""Micro short circuit fault diagnosis in Li-ion cell"", ""International Journal of Power Electronics and Drive
Systems"", Volume No. 16, Issue No.3,Pages.2103-2111, http://doi.org/10.11591/ijpeds.v16.i3.pp2103-2111 |
|
Boopathi C, Natarajan N, Vadivel Vivek V, Ganapathy T, “Enhanced Energy Absorption in Heat Treated SS304 Infill/AL6061
Composites: Novel Structural Design for Offshore Applications”, "Materia-Rio de Janeiro", Volume. No. 30 (2025),
Pages.1-17, Jul 2025, DOI: https://doi.org/10.1590/1517-7076-RMAT-2025-0116 . |
|
Boopathi C, Natarajan N, Vadivel Vivek V,Ganapathy T, “Enhanced Energy Absorption in Heat Treated SS304 Infill/AL6061
Composites: Novel Structural Design for Offshore Applications”, "Materia-Rio de Janeiro", Volume No. 30 (2025),
Pages.1-17, Jul 2025, DOI: https://doi.org/10.1590/1517-7076-RMAT-2025-0116. |
|
Kavya P, Chellapriya K, Eswaramoorthi S, Krishna Prakash Arunachalam, Senthilkumar P,
“Forecasting of Heat and Mass Transfer in Casson Nanofluid Flow with Entropy Optimization: Machine Learning Approach”,
""SN Applied Sciences"", Jul 2025, DOI: https://doi.org/10.1007/s42452-025-07364-9. |
|
Oorappan G M, Lakshmanan S A, Jagabar Sathik M, “60 Flat PWM Technique for Single-Source Switched-Capacitor Multilevel
Inverter with Quadruple Voltage Boost and Enhanced Output”, "Electrical Engineering", Volume No. 15, Pages.23637, Jul
2025, DOI: 10.1038/s41598-025-09513-x. |
|
Dinesh Kumar Madheswaran, Vengatesan S, Jegadheeswaran S, Mohanraj Thangamuthu, Hussein Togun, Boopathi Duraisamy, Chun
Ouyang, Wasim Khan. “Ammonia as a Hydrogen Carrier: A Comprehensive Analysis of Electrolysis Efficiency and Its
Potential in Sustainable Energy Systems”, ""Renewable & Sustainable Energy Reviews"", Volume No. 221, Pages.
115915 (20 Pages), Jun 2025, DOI: 10.1016/j.rser.2025.115915. |
|
Vadivel Vivek V, Veera Ajay C, Thoufiq Mohammed K, “Analyzing the Synergistic Effects of Hard Ceramic SiC and Sn on the
Mechanical Properties and Wear Performance of Stir-cast Eutectic A356 Aluminium Alloy Composites”, "Engineering Research
Express", Volume No.10/1, Issue No.1, Pages.1-33, Jun 2025, DOI: 10.1088/2631-8695/ade1a6. |
|
Somasundaram B, Vigneshkumar M, Raghunath M, “A Novel Plasma Spray NiCr/Al2O3 and Cr2C/Al2O3 Coating Design for Hot
Corrosion Prevention and to Enhance the Efficiency in Boiler Tubes”, ""Malaysian Journal of Chemistry"", Volume No. 27,
Issue No. 3, Pages.602-612, Jun 2025, DOI: 10.55373/mjchem.v27i3.602. |
|
Kavitha T, Nagarajan P, Arulmary A,""“Automatic Anti Collision System For Intelligent Transportation System”,
""Atlantis"", Jun 2025, DOI: 10.2991/978-94-6463-754-0_31. |
|
Kavitha Thandapani P, Dhinesh S K, Ashok Kumar N, Arulmary A, “Next Generation Optical SDM Communication System using
Artificial Intelligence”, "ATLANTIS", Pages. 333-348, Jun 2025, DOI: 10.2991/978-94-6463-754-0_3. |
|
Gibi M, Prakash P, Siddharthan B"" “Enhancing Mechanical Properties of PETG-CNT Nanocomposites Fabricated via Fused
Filament Fabrication”, ""Malaysian Journal of Chemistry"", Volume No. 27, Issue No. 3, Pages. 455-463, Jun 2025, DOI:
https://doi.org/10.55373/mjchem.v27i3.455. |
|
Siddharthan B, Kumaravel A,“Experimental Investigation and Comparative Analysis of LM13 Hybrid Composite Reinforced
with Zirconium Carbide and Carbon Short Fibres”, ""Malaysian Journal of Chemistry"", Volume No. 27, Issue No.3, Pages.
391-399, Jun 2025, DOI: https://doi.org/10.55373/mjchem.v27i3.391. |
|
Nijandhan K,Muralikannan R, Deepak B. Thimiri Govinda Raj & Pradeeh E L, ""The effect of fiber parameters and surface
treatment in caster fiber- reinforced polyester composites"",""International Journal of Polymer Analysis and
Characterization"", Volume .No.1, Issue No.15, Pages.485-489, 2025, DOI. https://doi.org/10.1080/1023666X.2025.2477562. |
|
Madheswaran Subramaniyan ,Sivakumar Karuppan ,Anandhamoorthy Appusamy,Nagarajan Pitchandi , ""Sandwich Printing of PLA
and Carbon Fiber Reinforced-PLA for Enhancing Tensile and Impact Strength of Additive Manufactured parts"" ' ""Journal
of Manufacturing Processes"", Volume 137, 15 March 2025, Pages 425-436, https://doi.org/10.1016/j.jmapro.2025.02.001. |
|
Nijandhan K,Muralikannan R, Deepak B. Thimiri Govinda Raj & Pradeeh E L, ""The effect of fiber parameters and surface
treatment in caster fiber- reinforced polyester composites"",""International Journal of Polymer Analysis and
Characterization"", Volume .No.1, Issue No.15, Pages.485-489, 2025, DOI. https://doi.org/10.1080/1023666X.2025.2477562. |
|
Yuvaraj S, Chenni Kumaran J, Bharathiraja M and Krishna Kumar K, "A Deep Learning Approach to Stock Trend Forecasting
Using CNNs with Technical Indicators"," 2025 3rd International Conference on Intelligent Data Communication Technologies
and Internet of Things (IDCIoT),2025, Pages. 1247-1252, DOI: 10.1109/IDCIOT64235.2025.10914755. |
|
Vinoth L G S , Nagarajan Pitchandi and Karthikeyan A G, "Novel 6D Pose Estimation for Pick-and-Place Tasks using
Model-based Learning," 2025 3rd International Conference on Intelligent Data Communication Technologies and Internet of
Things (IDCIoT), 2025, Pages. 2269-2275, DOI: 10.1109/IDCIOT64235.2025.10915024. |
|
Vijayanand Pachanoor, Bharathiraja Moorthi, " Synthesis and Characterization of Poly (Aniline –Co-Chloroaniline)
Polymers and Applications in Automotive Industries as Paint Coatings", "SAE Technical Papers" Volume .No.37 , Issue
No.28 , Pages. 1 to 8, DOI.10.4271/2025-28-0037, 2025. |
|
Appusamy Anandha Moorthy , Subramaniyan Madheswaran, Ganesh Babu L, Murthi M K , Nanthakumar S, and Kallipatti Laxmanan
Senthilkumar, Andiappan Selvakumar,"Analyzing Experimentally the Dynamic Characteristics of Journal Bearings Under
Various Load Conditions", " International Conference on Materails Innovation in Engineering and Technology ( ICMIET
2024)", Volume No.2925 (2024) 012020, Issue No. 1, Pages 1-12, DOI. 10.1088/1742-6596/2925/1/012020, 2024. |
|
Jegadheeswaran S, Sathish D, Murugan Veeramanikandan and Raja Thirunavukkarasu, "Temperature And Salt Concentration
Behavior Of A Compact Rectangular Salinity Gradient Solar Pond", Journal Of Thermal Engineering, Mar 2024 |
|
Rajiev R, S M Vinu Kumar Harwinder Singh, "Multi-Response Optimization Of Wear Parameters Of Flax Reinforced Epoxy
Composites Using Taguchi-Gra-Pca Approach", Indian Journal Of Fibre & Textile Research, Vol. No.48, Issue No.45261, Jan
2024 |
|
Raghunath M, N Ashokkumar Pothala Venkata, Haritha Parimi Eswar, P Venkata Sai, Kiran Kumar and S S Bhanu Prakash,
"Iot-enabled vlc industry automation system: harnessing node mcu microcontroller for streamlined control and
communication", International conference on intelligent systems for cybersecurity, Vol. No.1, Issue. No.2 , Jul 2024 |
|
Vadivel Vivek V, Nijandhan K and Natarajan N, "Investigation Of Mechanical Performance Of Borassus Flabellifer Sprout
Fiber Reinforced Polymer Composites", Cellulose Chemistry And Technology, Vol. No.57, Issue No.45448, Aug 2023 |
|
Sivabalakrishnan R, Janaki Saminathan, Muthukumar Marappan, Senthil Kumar and Angappamudaliar Palanisamy, "Performance
Improvement Of Proton Exchange Membrane Fuel Cell By Modified Flow Field Design", Journal Of Energy Engineering, Vol.
No.149, Issue No.5, Jul 2023 |
|
Jegadheeswaran S, Dinesh Kumar Madheswaran, T. Praveenkumar and J. Arulmozhivarman, "Nanofluids As A Coolant For Polymer
Electrolyte Membrane Fuel Cells: Recent Trends, Challenges And Future Perspectives", Journal Of Cleaner Production, Vol.
No.424, Sep 2023 |
|
Siddharthan B and Kumaravel A, "Identifying Stir Casting Process Parameters To Maximize Strength Of Lm13 With Tib2 And
Zrc Hybrid Metal Matrix Composite", Materials Testing, Vol. No.66, Nov 2023 |
|
Rajiev R and Jeeva Jothi Kumaravel, "Hydrothermal Fabrication Of Two-Dimensional Indium Oxide Nanosheets For
High-Performance Supercapacitors", Materials Letters, Vol. No.358, Issue No.135835, Dec 2023 |
|
Chandramoorthy, Veera Ajay, Boopathi Chinnakannan, and Vinoth Viswanathan. 2024. "An Experimental Study on the Influence
of Micrographite on the Improvement of Mechanical Characteristics of A356 Microcomposites Processed via the Stir Casting
Route" Engineering Proceedings 61, no. 1: 3. https://doi.org/10.3390/engproc2024061003 |
|
Boopathi C, Lakshmi Priya, Anil Vasoya and Muthukumar Marappan, "Evaluating Dynamics, Security And Performance Metrics
For Smart Manufacturing", The Scientific Temper, Dec 2023 |
|
Pravin M C, Karthikeyan S, Sathyabama B and Balaji S, "Preparation And Characterization Of Stainless Steel Molybdenum
Composite Coatings And Its Evaluation Using Image Processing", Archives Of Metallurgy And Materials, Vol. No.24929,
Issue No.2023, Aug 2023 |
|
S. K. Dhinesh, P. Nagarajan, M. Raghunath, S. Sundar, N. Dhanushree and S. Pugazharasu, "AI Based Weed Locating and
Deweeding using Agri-Bot," 2023 Third International Conference on Smart Technologies, Communication and Robotics (STCR),
Sathyamangalam, India, 2023, pp. 1-6, doi: 10.1109/STCR59085.2023.10397025. |
|
Dhinesh S K and Senthil Kumar K L, "Sensitivity Enhancement Through Geometry Modification Of 3d Printed Conductive
Pla-Based Strain Sensors", Rapid Prototyping Journal, Aug 2023 |
|
Satyam, D. Damodaram, N. Pitchandi and N. A. Kumar, "AGRA: An Efficient Ant Colony Grid-based Routing Algorithm for
Mobile Ad hoc Networks," 2023 4th IEEE Global Conference for Advancement in Technology (GCAT), Bangalore, India, 2023,
pp. 1-6, doi: 10.1109/GCAT59970.2023.10353304. |
|
Sivasankar, G.A., Arun Karthick, P., Boopathi, C., Brindha, S., Nirmalraj, R.J.T.,
Benham, A., "Evaluation and comparison on mechanical properties of abaca and hemp
fiber reinforced hybrid epoxy resin composites", Materials Today: Proceedings, Vol.
No., Issue No., pp.-, 2023 |
|
Boopathi, C., Vadivel Vivek, V., Natarajan, N., Balaganesh, R.S., "Study of
Improvement in Mechanical Properties of Chemically Treated Hybrid Fibre-Reinforced
Polymer Composites", Lecture Notes in Mechanical Engineering, Vol. No., Issue No.,
pp.123-133, 2023 |
|
Oorappan, G.M., Pandarinathan, S., Arumugam, J., "A new nine-level
switched-capacitor-based multilevel inverter with low voltage stress and
self-balancing", Electrical Engineering, Vol. No.105, Issue No.2, pp.867-882, 2023
|
|
Murugan, O.G., Arumugam, J., "Single-Source Switched-Capacitor-Based Multilevel
Inverter (S3CMLI) and Its Horizontal/Vertical Extension with Reduced Components",
Iranian Journal of Science and Technology - Transactions of Electrical Engineering,
Vol. No.47, Issue No.1, pp.337-353, 2023 |
|
Vadivelvivek, V., Natarajan, N., Nijandhan, K., Boopathi, C., "Investigation Of
Mechanical Performance Of Borassus Flabellifer Sprout Fiber Reinforced Polymer
Composites", Cellulose Chemistry And Technology, Vol. No.57, Issue No.5, pp.637-644,
2023 |
|
Pradeesh, E.L., Udhayakumar, S., Vasundhara, M.G., Kalavathi, G.K., "Experimental
and numerical analysis on different beam geometries for vibration based
piezoelectric energy harvester", Ferroelectrics, Vol. No.606, Issue No.1,
pp.219-238, 2023 |
|
Sathish Kumar, R., Manoj Kumar, R., Saravanan, B., Pavithran, D., Siddharthan, B.,
Uday Ranjan Goud, N., "Development of an efficient process for recycling of
lithium-ion batteries", AIP Conference Proceedings, Vol. No.2492, Issue No., pp.-,
2023 |
|
Siddharthan, B., Kumaravel, A., Praveen J, J., "Mechanical and electrical
characterization of aluminium alloy metal matrix composites reinforced with
graphite", Materials Today: Proceedings, Vol. No.66, Issue No., pp.1413-1418, 2022
|
|
Deepankumar, S., Senthil Kumar, K.L., "Production of Oil from E-Waste Plastics and
their Effect in CI Engine Performance with Diesel and Nano Additive", Solid Fuel
Chemistry, Vol. No.56, Issue No.6, pp.478-487, 2022 |
|
Dhinesh, S.K., Joshua Robert, J., Tushar Nair, S., Sharne Moni, D.H., Sona Fowzeya,
S., Senthil Kumar, K.L., Raghunath, M., Nagarajan, P., "Recent trends in additive
manufacturing of electronics devices", Materials Today: Proceedings, Vol. No.66,
Issue No., pp.928-941, 2022 |
|
Vikneswaran, S.K., Nagarajan, P., Dinesh, S.K., Senthil Kumar, K.L., Megalingam, A.,
"Investigation of the tensile behaviour of PolyLactic Acid, Acrylonitrile Butadiene
Styrene, and Polyethylene Terephthalate Glycol materials", Materials Today:
Proceedings, Vol. No.66, Issue No., pp.1093-1098, 2022 |
|
Joshua Robert, J., Senthil Kumar, P., Tushar Nair, S., Sharne Moni, D.H.,
Swarneswar, B., "Fuzzy control of active suspension system based on quarter car
model", Materials Today: Proceedings, Vol. No.66, Issue No., pp.902-908, 2022 |
|
Dhinesh, S.K., Joshua Robert, J., Tushar Nair, S., Sharne Moni, D.H., Sona Fowzeya,
S., Senthil Kumar, K.L., Raghunath, M., Nagarajan, P., "Recent trends in additive
manufacturing of electronics devices", 66, Vol. No., Issue No.928, pp.941-2022, |
|
Vadivel Vivek, V., Boopathi, C., Natarajan, N., L.Pradeesh, E., Pravin, M.C.,
"Exploration of mechanical properties of jute fiber and copper wire reinforced
hybrid polymer composites", Materials Today: Proceedings, Vol. No.66, Issue No.,
pp.707-711, 2022 |
|
Pradeesh, E.L., Udhayakumar, S., Vasundhara, M.G., Kalavathi, G.K., "A review on
piezoelectric energy harvesting", Microsystem Technologies, Vol. No.28, Issue No.8,
pp.1797-1830, 2022 |
|
Pradeesh, E.L., Vivek, V.V., Bhuvaneshwari, M., Thilakavarshini, T., Guruprasad, V.,
Vaishnavi, A.S., "Investigation on IoT based smart E-Inhaler integrated with mobile
application", Materials Today: Proceedings, Vol. No.66, Issue No., pp.1082-1087,
2022 |
|
Manivannan, S., Sudhahar, S., Oorappan, G.M., Rajalashmi, K., Saravanakumar, N.,
"Design Implementation and Evaluation of Password Protected Circuit Breaker for
Reliable Power System Protection and Maintenance", Springer Proceedings in
Materials, Vol. No.5, Issue No., pp.933-942, 2021 |
|
Siddharthan, B., Kumaravel, A., "Experimental Study on Machinability of Metal Matrix
Composite by Abrasive Water Jets", Springer Proceedings in Materials, Vol. No.5,
Issue No., pp.1001-1013, 2021 |
|
Praveen, S.M., Saravanan, B., Siddharthan, B., Kumaragurubaran, S.B., "Thermal
management in conventional diesel engines", Materials Today: Proceedings, Vol.
No.45, Issue No., pp.1161-1165, 2021 |
|
Boopathi, C., Veera Ajay, C., Manoj Vignesh, S., Saravanakumar, S.M., "Studies on
Electric Discharge Machining of AA6063 Alloy Using Taguchi Approach", Springer
Proceedings in Materials, Vol. No.5, Issue No., pp.35-46, 2021 |
|
Vivek, V.V., Natarajan, N., Prabhu, S.R., Kumar, K.L.S., Karrthik, R.S., "Prediction
of mechanical characteristics of Wrightia tinctoria fiber reinforced iso-polyester
resin composites", Materials Today: Proceedings, Vol. No.45, Issue No.,
pp.1151-1155, 2021 |
|
Boopathiraja, K.P., Ramamoorthi, R., Vadivel Vivek, V., Vickram, K., Vinodh Kumar,
S., Yuvaraj, K.P., "Characterization and surface modification on composites by
friction stir processing - A review", Materials Today: Proceedings, Vol. No.45,
Issue No., pp.1156-1160, 2021 |
|
Gokul, V., Dhinesh, S., Kalaiyarasu, K., Kalidasan, B., Ravikumar, M., "A
comprehensive review on solar cooker tracking techniques for performance
enhancement", 1059, Vol. No.1, Issue No., pp.-2021, |
|
Dhinesh, S.K., Senthil Kumar, K.L., Megalingam, A., Gokulraj, A.P., "Design and
fabrication of low-cost micromachining system for prototyping printed circuit
boards", 9, Vol. No., Issue No., pp.-2021, |
|
Dhinesh, S.K., Arun Prakash, S., Senthil Kumar, K.L., Megalingam, A., "Study on
flexural and tensile behavior of PLA, ABS and PLA-ABS materials", 45, Vol. No.,
Issue No.1175, pp.1180-2021, |
|
Nijandhan, K., Raghunath, M., Kanna, B.M., Nithish, P., Vishnu Prakash, G., Logesh,
E., "Optimization of Mechanical Behaviors of Boiled Egg shell Particulate-banana
fiber Reinforced Polyester Composites", Springer Proceedings in Materials, Vol.
No.5, Issue No., pp.107-114, 2021 |
|
Pradeesh, E.L., Udhayakumar, S., Vasundhara, M.G., Nijandhan, K., "Design and
development of frequency tuneable vibration based piezoelectric energy harvester",
Ferroelectrics, Vol. No.584, Issue No.1, pp.85-99, 2021 |
|
Vinu Kumar, S.M., Senthil kumar, K.L., Suresha, B., "Effect of Ultraviolet (UV)
Radiation on Mechanical Behavior of Bi-directional Carbon Fabric Reinforced Epoxy
Composites Impregnated with Fly Ash Cenosphere Particles", Springer Proceedings in
Materials, Vol. No.5, Issue No., pp.1-9, 2021 |
|
Dhinesh, S.K., Senthil Kumar, K.L., Megalingam, A., Gokulraj, A.P., "Design and
fabrication of low-cost micromachining system for prototyping printed circuit
boards", Journal of Engineering Research (Kuwait), Vol. No.9, Issue No., pp.-, 2021
|
|
Dhinesh, S.K., Arun Prakash, S., Senthil Kumar, K.L., Megalingam, A., "Study on
flexural and tensile behavior of PLA, ABS and PLA-ABS materials", Materials Today:
Proceedings, Vol. No.45, Issue No., pp.1175-1180, 2021 |
|
Rajiev, R., Saravanan, S., Sasikumar, C., Sasikumar, G., "Optimization of
Multi-Criteria Decision Making Analysis for Selection of Suppliers in Supply Chains
Using Fuzzy Logic", IOP Conference Series: Materials Science and Engineering, Vol.
No.1059, Issue No.1, pp.-, 2021 |
|
Jishin Jayan, T., Muthukumar, K., Rajiev, R., "Dynamic Risk Assessment of an Ammonia
Storage Tank Based on Bow-Tie and Bayesian Approaches", Springer Proceedings in
Materials, Vol. No.5, Issue No., pp.427-436, 2021 |
|
Tamilarasan, V.D., Rameshkumar, T., Rajiev, R., Saravanan, S., Chandrasekaran, M.,
"A review on existing single cylinder 4 stroke petrol engine design analysis",
Materials Today: Proceedings, Vol. No.45, Issue No., pp.8064-8069, 2021 |
|
Saravanan, S., Rajiev, R., Tamilarasan, V.D., Kumar, K.M., "Frequency response
analysis of Zn-Ni-Co alloy anode for thin film micro batteries", Materials Today:
Proceedings, Vol. No.45, Issue No., pp.1247-1250, 2021 |
|
Lakshmipriya, S., Bhuvaneswari, S., Rajiev, R., "Survey on the anticipation of an
industrial hygienist", Materials Today: Proceedings, Vol. No.45, Issue No.,
pp.1446-1450, 2021 |
|
Saravanan, S., Rajiev, R., Kumar, K.M., "An investigation of Zn-Co-Ni alloy anode
for thin film micro batteries", Materials Today: Proceedings, Vol. No.45, Issue No.,
pp.1243-1246, 2021 |
|
Sivabalakrishnan, R., Dineshkumar, M., Sharon, B.P., Naveenkumar, P., Vignesh, S.,
"Design and Fabrication of 3D-Printed Acrylonitrile Butadiene Styrene (ABS) Dam
Automation Structure with Integrated Flood Monitoring System Using Data Analysis and
Computation Techniques", 5, Vol. No., Issue No.137, pp.145-2021, |
|
Yuvaraj, K., Ismail, A.M., Nagarajan, P., Vigneshwaran, S., "Design and fabrication
of gypsum prototypes based on binder jetting technology", Materials Today:
Proceedings, Vol. No.45, Issue No., pp.3085-3090, 2021 |
|
Sivabalakrishnan, R., Kalaiarasan, A., Ajithvishva, M.S., Hemsri, M., Oorappan,
G.M., Yasodharan, R., "IoT visualization of Smart Factory for Additive Manufacturing
System (ISFAMS) with visual inspection and material handling processes", IOP
Conference Series: Materials Science and Engineering, Vol. No.995, Issue No.1, pp.-,
2020 |
|
Yuvaraj, K., Oorappan, G.M., Megavarthini, K.K., Pravin, M.C., Adharsh, R., Ashwath
Kumaran, M., "Design and Development of An Application for Database Maintenance in
Inventory Management System Using Tkinter and Sqlite Platform", IOP Conference
Series: Materials Science and Engineering, Vol. No.995, Issue No.1, pp.-, 2020 |
|
Oorappan, G.M., Jeevanandham, A., Sivabalakrishnan, R., Sudhahar, S., "Design and
Fabrication of Step Feeder automation Machine for the Automobile Steering Ball
joints", IOP Conference Series: Materials Science and Engineering, Vol. No.995,
Issue No.1, pp.-, 2020 |
|
Mohamed Ismail, A., Yuvaraj, K., Vigneswaran, S., Nagarajan, P., "Development of Low
cost 6 Dot Unicode Braille printer for aiding visually impaired persons", IOP
Conference Series: Materials Science and Engineering, Vol. No.995, Issue No.1, pp.-,
2020 |
|
Megavarthini, K.K., Arun Kumar, K., Nagarajan, P., Mohammed Ismail, A., Karrthik,
R.S., Raghul Kumar, S., "Formulation of lagrangian equation and dynamic analysis of
2-DoF Industrial robot using Roboanalyzer", IOP Conference Series: Materials Science
and Engineering, Vol. No.995, Issue No.1, pp.-, 2020 |
|
Vigneshwaran, S., Nagarajan, P., Mohamed Ismail, A., Yuvaraj, K., "Automation and
performance analysis of tea filter bags packing process using delta configured
robot", IOP Conference Series: Materials Science and Engineering, Vol. No.995, Issue
No.1, pp.-, 2020 |
|
Pradeesh, E.L., Udhayakumar, S., Vasundhara, M.G., Vadivel Vivek, V., "Vibration
Based Piezoelectric Energy Harvesting-A Review", IOP Conference Series: Materials
Science and Engineering, Vol. No.995, Issue No.1, pp.-, 2020 |
|
Tamilarasu, P., Jones Praveen, J., Siddharthan, B., Vivek, U., Giridharan, M.,
"Enhancing the material properties of EN24 pinion material by heat treatment
process", IOP Conference Series: Materials Science and Engineering, Vol. No.764,
Issue No.1, pp.-, 2020 |
|
Thiyagu, S., Naveen, T.K., Siddharthan, B., Manirathnam, A.S., "Numerical
investigation and performance enhancement of 210 MW boiler by utilization of waste
heat in flue gas", Materials Today: Proceedings, Vol. No.33, Issue No., pp.756-762,
2020 |
|
Veera Ajay, C., Pradeep, B.A., Boopathi, C., Sanjeev, R.K., Meganathan, V.,
"Comparison of geometrical accuracy and surface finish of cam profile generated by
wire-EDM and CNC milling machine", IOP Conference Series: Materials Science and
Engineering, Vol. No.764, Issue No.1, pp.-, 2020 |
|
Senthil Kumar, K.L., Dhinesh, S.K., "Dielectric Fluid Parameter Optimization in
Machining of Composite Material using WEDM Process", 995, Vol. No.1, Issue No.,
pp.-2020, |
|
Dhinesh, S.K., Senthil Kumar, K.L., "A Review on 3D Printed Sensors", 764, Vol.
No.1, Issue No., pp.-2020, |
|
Siddharthan, B., Rajiev, R., Saravanan, S., Naveen, T.K., "Effect of Silicon Carbide
in Mechanical Properties of Aluminium Alloy Based Metal Matrix Composites", IOP
Conference Series: Materials Science and Engineering, Vol. No.764, Issue No.1, pp.-,
2020 |
|
Rajith Karna, D., Rajiev, R., Saravanan, S., "Product design and development of
googles and hand stick for blind people", IOP Conference Series: Materials Science
and Engineering, Vol. No.764, Issue No.1, pp.-, 2020 |
|
Senthil Kumar, K.L., Dhinesh, S.K., "Dielectric Fluid Parameter Optimization in
Machining of Composite Material using WEDM Process", IOP Conference Series:
Materials Science and Engineering, Vol. No.995, Issue No.1, pp.-, 2020 |
|
Senthil Kumar, K.L., Saravanan, B.A., "Design and fabrication of solar dryer for
dehydration of vegetables", AIP Conference Proceedings, Vol. No.2270, Issue No.,
pp.-, 2020 |
|
Vinu Kumar, S.M., Senthil Kumar, K.L., Siddhi Jailani, H., Rajamurugan, G.,
"Mechanical, DMA and Sound Acoustic behaviour of Flax woven fabric reinforced Epoxy
composites", Materials Research Express, Vol. No.7, Issue No.8, pp.-, 2020 |
|
Dhinesh, S.K., Senthil Kumar, K.L., "A Review on 3D Printed Sensors", IOP Conference
Series: Materials Science and Engineering, Vol. No.764, Issue No.1, pp.-, 2020 |
|
Vinu Kumar, S.M., Hariprasad, V., Senthil Kumar, K.L., "Influence of Water Ageing on
Mechanical Performance of Glass Fiber Reinforced Polyester (GFRP) nanocomposites",
IOP Conference Series: Materials Science and Engineering, Vol. No.764, Issue No.1,
pp.-, 2020 |
|
Senthil Kumar, K.L., "Preface", IOP Conference Series: Materials Science and
Engineering, Vol. No.764, Issue No.1, pp.-, 2020 |
|
Deepankumar, S., Senthil Kumar, K.L., Gokul, L.S., Saravanan, B., "The Result of
Nano-Additives in Diesel Engine using Diesel-E Waste Plastics Pyrolysis Oil Fuel
Blends: A Review", IOP Conference Series: Materials Science and Engineering, Vol.
No.764, Issue No.1, pp.-, 2020 |
|
Santhoshkumar, S., Senthil Kumar, K.L., Kalil Rahiman, M., Mathankumar, P., "A
review on friction stir welding of aluminium alloys and the effects on tool
geometry", IOP Conference Series: Materials Science and Engineering, Vol. No.764,
Issue No.1, pp.-, 2020 |
|
Raghunah, M., Nijandhan, K., Dhanasekar, R., Sukesh, P., Nishanth, A., Megantha, P.,
"Particle swarm optimization of tensile strength on treated Bermuda grass Fiber as
reinforcement in polyester composites", IOP Conference Series: Materials Science and
Engineering, Vol. No.995, Issue No.1, pp.-, 2020 |
|
Kulandaivel, N., Muralikannan, R., KalyanaSundaram, S., "Extraction and
Characterization of Novel Natural Cellulosic Fibers from Pigeon Pea Plant", Journal
of Natural Fibers, Vol. No.17, Issue No.5, pp.769-779, 2020 |
|
Sivabalakrishnan, R., Kalaiarasan, A., Ajithvishva, M.S., Hemsri, M., Oorappan,
G.M., Yasodharan, R., "IoT visualization of Smart Factory for Additive Manufacturing
System (ISFAMS) with visual inspection and material handling processes", 995, Vol.
No.1, Issue No., pp.-2020, |
|
Oorappan, G.M., Jeevanandham, A., Sivabalakrishnan, R., Sudhahar, S., "Design and
Fabrication of Step Feeder automation Machine for the Automobile Steering Ball
joints", 995, Vol. No.1, Issue No., pp.-2020, |
|
R, Y., A.P, S., P, M., J, A., R, S., "Investigation and influence of layer
composition of tandem perovskite solar cells for applications in future renewable
and sustainable energy", 212, Vol. No., Issue No., pp.-2020, |
|
Dhanasekar, R., Kalaiyarasi, M., Arunjayakar, S., Raghunath, M., Prabhu, S.R.,
"Control and Stabilization of Pitch Axis Angle in 3 DOF Titltrotor", IOP Conference
Series: Materials Science and Engineering, Vol. No.995, Issue No.1, pp.-, 2020 |
|
Nagarajan, P., Vigneshwaran, S., Yuvaraj, K., Mohammed Ismail, A., Raghavendra
Prabhu, S., "Modelling of Robotic Single Peg-In-Hole Assembly Using ADAMS/MATLAB
Co-simulation", IOP Conference Series: Materials Science and Engineering, Vol.
No.995, Issue No.1, pp.-, 2020 |
|
Vadivel Vivek, V., Pradeesh, E.L., Natarajan, N., Pravin, M.C., Raghavendra Prabhu,
S., "Development of a system to assist in library to automate the book handling
process", IOP Conference Series: Materials Science and Engineering, Vol. No.995,
Issue No.1, pp.-, 2020 |
|
Arulmurugan, L., Raghavendra Prabhu, S., Ilangkumaran, M., Suresh, V.,
Saravanakumar, R., Raghunath, M., "Kinematics and Plane Decomposition Algorithm for
Non Linear Path Planning Navigation and Tracking of Unmanned Aerial Vehicles", IOP
Conference Series: Materials Science and Engineering, Vol. No.995, Issue No.1, pp.-,
2020 |
|
Prabhu, S.R., Ilangkumaran, M., Mohanraj, T., "3D printing of automobile spoilers
using MCDM techniques", Materialpruefung/Materials Testing, Vol. No.62, Issue No.11,
pp.1121-1125, 2020 |
|
Karrthik, R.S., Raghavendra Prabhu, S., Megavarthini, K.K., Nandakumar, K., Mathesh,
B., "Modelization of elevator control system", IOP Conference Series: Materials
Science and Engineering, Vol. No.764, Issue No.1, pp.-, 2020 |
|
Pitchandi, N., Subramanian, S.P., "Image Uncertainty-Based Absolute Camera Pose
Estimation with Fibonacci Outlier Elimination", Journal of Intelligent and Robotic
Systems: Theory and Applications, Vol. No.96, Issue No.1, pp.65-81, 2019 |
|
Justus Panicker, C.T., Veera Ajay, C., Boopathi, C., Vivekanandan, R., "Comparing
the Geometrical Accuracy of a 3D Printed Pattern to a Metal Pattern", IOP Conference
Series: Materials Science and Engineering, Vol. No.561, Issue No.1, pp.-, 2019 |
|
Boopathi, C., Natarajan, N., Sanjeev, R.K., Meganathan, V., Kavin, P., "Influence of
red mud particles on thermo-mechanical behaviour of areca fiber reinforced polymer
composites", AIP Conference Proceedings, Vol. No.2128, Issue No., pp.-, 2019 |
|
Ajay, C.V., Boopathi, C., Kavin, P., "Incremental sheet metal forming (ISMF): A
literature review", AIP Conference Proceedings, Vol. No.2128, Issue No., pp.-, 2019
|
|
Kailainathan, S., Muralikannan, R., Nijandhan, K., Venkatachalam, S., "High-strength
hybrid particulate-fibre polymer composites: The role of process temperature on the
mechanical strength", Materials Research Express, Vol. No.6, Issue No.12, pp.-, 2019
|
|
Senthil Kumar, P., Sivakumar, K., Kannan, P.R., "Fuzzy sliding mode control for
active vibration control of hydraulic actuated vehicle suspension", International
Journal of Recent Technology and Engineering, Vol. No.7, Issue No.4, pp.139-145,
2019 |
|
Shankar, K.P.A., Muthukumar, K., Rajiev, R., "CFD simulation analysis and
experimental study on multilobe hydrodynamic journal bearing", AIP Conference
Proceedings, Vol. No.2128, Issue No., pp.-, 2019 |
|
Muthukumar, K., Janardhan, S., Rajiev, R., "A study on work place health and safety
aspects in manufacturing industry", AIP Conference Proceedings, Vol. No.2128, Issue
No., pp.-, 2019 |
|
Rajiev, R., Sadagopan, P., Shanmuga Prakash, R., "Study on investigation of hot
forging die wear analysis-An industrial case study", Materials Today: Proceedings,
Vol. No.27, Issue No., pp.2752-2757, 2019 |
|
Sivabalakrishnan, R., Senthil Kumar, A.P., "Design and development of wireless
controlled electro-pneumatic operated mobile crane system for material handling
process", 9, Vol. No., Issue No.184, pp.193-2019, |
|
Vignesh, S., Sivabalakrishnan, R., Arulshri, K.P., Senthil Kumar, A.P., Dinesh Babu,
P., "Analysis and simulationof automatic change over system in vehicle headlights
for prevention of road accidents", 9, Vol. No., Issue No.136, pp.140-2019, |
|
Prabhu, S.R., Ilangkumaran, M., "Decision making methodology for the selection of 3D
printer under fuzzy environment", International Journal of Materials and Product
Technology, Vol. No.59, Issue No.3, pp.239-252, 2019 |
|
Prabhu, S.R., Ilangkumaran, M., "Selection of 3D printer based on FAHP integrated
with GRA-TOPSIS", International Journal of Materials and Product Technology, Vol.
No.58, Issue No.44987, pp.155-177, 2019 |
|
Pradeesh, E.L., Udhayakumar, S., Sathishkumar, C., "Investigation on various beam
geometries for piezoelectric energy harvester with two serially mounted
piezoelectric materials", SN Applied Sciences, Vol. No.1, Issue No.12, pp.-, 2019
|
|
Pradeesh, E.L., Udhayakumar, S., "Effect of placement of piezoelectric material and
proof mass on the performance of piezoelectric energy harvester", Mechanical Systems
and Signal Processing, Vol. No.130, Issue No., pp.664-676, 2019 |
|
Pradeesh, E.L., Udhayakumar, S., "Investigation on the geometry of beams for
piezoelectric energy harvester", Microsystem Technologies, Vol. No.25, Issue No.9,
pp.3463-3475, 2019 |
|
Ramamoorthi, R., Balamurugan, S., Vignesh, S., Ramaswamy, K., "Experimental study to
stimulate the transmission of heat and optimization of the mass transmission in
packaged cooling tower-structures with horizontal fill packs", 8, Vol. No.4S, Issue
No.260, pp.262-2019, |
|
Karrthik, R.S., Baskaran, S., Raghunath, M., "Development of intelligent model to
predict the characteristics of biodiesel operated ci engine with hydrogen
injection", Advances in Computational Design, Vol. No.4, Issue No.4, pp.367-379,
2019 |
|
Kaviyarasan, K., Pridhar, T., Sureshbabu, B., Boopathi, C., Srinivasan, R.,
"Fabrication of Al6061-Al2O3 composite through liquid metallurgy technique", IOP
Conference Series: Materials Science and Engineering, Vol. No.402, Issue No.1, pp.-,
2018 |
|
Suresh Babu, B., Chandramohan, G., Boopathi, C., Pridhar, T., Srinivasan, R.,
"Production and characterization of mechanical and microstructural behaviour of
friction stir welded Al6063 composites reinforced with Gr/B4C/SiC particles",
Journal of Ceramic Processing Research, Vol. No.19, Issue No.1, pp.69-74, 2018 |
|
Dhinesh, S.K., Parameshwaran, R., Praveen Kumar, S., "Influence of high voltage on
heat transfer performance in automobile radiators", 8, Vol. No.2 Special Issue 2,
Issue No.111, pp.114-2018, |
|
Vignesh, S., Muthukumaran, G., Dinesh Babu, P., Arulshri, K.P., Sivabalakrishnan,
R., Surya, G., "Development of mathematical models and evaluation of the optimal
process parameters for laser surface hardening of low alloy steel using elitist
non-dominated sorting genetic algorithm", PartF7, Vol. No., Issue No.583,
pp.590-2018, |
|
Rajiev, R., Sadagopan, P., "Simulation and Analysis of hot forging dies for Pan Head
bolt and insert component.", Materials Today: Proceedings, Vol. No.5, Issue No.2,
pp.7320-7328, 2018 |
|
Thirumoorthy, A., Arjunan, T.V., Senthil Kumar, K.L., "Latest Research Development
in Aluminum Matrix with Particulate Reinforcement Composites - A Review", Materials
Today: Proceedings, Vol. No.5, Issue No.1, pp.1657-1665, 2018 |
|
Nijandhan, K., Muralikannan, R., Venkatachalam, S., "Ricinus communis fiber as
potential reinforcement for lightweight polymer composites", Materials Research
Express, Vol. No.5, Issue No.9, pp.-, 2018 |
|
Senthil Kumar, P., Sivakumar, K., Kanagarajan, R., Kuberan, S., "Adaptive neuro
fuzzy inference system control of active suspension system with actuator dynamics",
Journal of Vibroengineering, Vol. No.20, Issue No.1, pp.541-549, 2018 |
|
Pitchandi, N., Subramanian, S.P., "GA-based camera calibration for visionassisted
robotic assembly system", IET Computer Vision, Vol. No.11, Issue No.1, pp.50-59,
2017 |
|
Pitchandi, N., Subramanian, S.P., Irulappan, M., "Insertion force analysis of
compliantly supported peg-in-hole assembly", Assembly Automation, Vol. No.37, Issue
No.3, pp.285-295, 2017 |
|
Nagarajan, P., Perumaal, S.S., Yogameena, B., "Vision based pose estimation of
multiple peg-in-hole for robotic assembly", Lecture Notes in Computer Science
(including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in
Bioinformatics), Vol. No.10481 LNCS, Issue No., pp.50-62, 2016 |
|
Pridhar, T., Sankaran, R.A., Ravikumar, K., Boopathi, C., "The effect of particle
hybridization on micro structure analysis and mechanical behavior of metal matrix
composites: An experimental approach", Digest Journal of Nanomaterials and
Biostructures, Vol. No.11, Issue No.3, pp.845-852, 2016 |
|
Athijayamani, A., Stalin, B., Sidhardhan, S., Boopathi, C., "Parametric analysis of
mechanical properties of bagasse fiber-reinforced vinyl ester composites", Journal
of Composite Materials, Vol. No.50, Issue No.4, pp.481-493, 2016 |
|
Kailainathan, S., Muralikannan, R., Kalyana Sundaram, S., Nijandhan, K.,
"Statistical Analysis and Pattern Search Optimization on the Impact Properties of
Talk Particulates Impregnated Sisal Fiber Reinforced Polyester Composites",
Transactions of the Indian Institute of Metals, Vol. No.68, Issue No.5, pp.859-865,
2015 |
|
Sundaram, S.K., Jayabal, S., Nijandhan, K., "Influence of fiber pretreatment on the
mechanical properties of Dharbai fiber reinforced polyester composites", Cellulose
Chemistry and Technology, Vol. No.49, Issue No.1, pp.61-64, 2015 |
|
Senthil Kumar, K.L., Ramesh Kumar, T., "An Integrated Approach to Optimize
Parameters in Electrochemical Machining Process", International Journal of Applied
Engineering Research, Vol. No.10, Issue No.3, pp.8297-8306, 2015 |
|
Rajieva, R., Sadagopanb, P., "Plastic deformation analysis of wear on insert
component and die service life in hot forging process", Indian Journal of
Engineering and Materials Sciences, Vol. No.22, Issue No.6, pp.686-692, 2015 |
|
Rajiev, R., Sadagopan, P., "Analysis of wear on pan head bolt component and die
service life in hot forging process", International Journal of Applied Engineering
Research, Vol. No.9, Issue No.24, pp.30953-30967, 2014 |
|
Senthil Kumar, K.L., Sivasubramanian, R., "Modeling of metal removal rate in
machining of aluminum matrix composite using artificial neural network", Journal of
Composite Materials, Vol. No.45, Issue No.22, pp.2309-2316, 2011 |
|
Senthil Kumar, K.L., Sivasubramanian, R., Kalaiselvan, K., "Selection of optimum
parameters in non conventional machining of metal matrix composite", Portugaliae
Electrochimica Acta, Vol. No.27, Issue No.4, pp.477-486, 2009 |
